CDL Exam Guide: How Commercial Driver’s License Knowledge Tests, Endorsements, and Licensing Work — and How to Prepare

CDL Exam Guide: How Commercial Driver’s License Knowledge Tests, Endorsements, and Licensing Work — and How to Prepare

Getting a Commercial Driver’s License runs through a sequence of steps set by federal standards and administered by your state: written knowledge tests, a Commercial Learner’s Permit, federally required entry-level training, and a behind-the-wheel skills test. This guide explains how that sequence works, what each knowledge test covers and how long it is, what the 80% passing standard means in practice, and how to prepare for each test. Verify every fact here with your state licensing agency and your state’s official CDL manual — the state that licenses you is the authority for your application.

The fence, plainly: this guide and the PassProfessor practice program are free practice only. PassProfessor does not issue CDLs or CLPs, does not administer CDL tests, and is not a state Department of Motor Vehicles (DMV) or any other state licensing agency. Real CDL knowledge tests are taken at the state licensing agency. Entry-Level Driver Training (ELDT) from a provider registered on the FMCSA Training Provider Registry is required before the skills test, and knowledge-test practice does not satisfy ELDT.

How CDL licensing works, step by step

  1. Meet the basic requirements. You must hold a valid regular driver’s license, meet your state’s age requirements — 18 for intrastate commerce in most states, 21 for interstate commerce and for transporting hazardous materials — and meet the federal medical requirements for commercial driving. Your state licensing agency publishes its full list; read it before you study.
  2. Study the state CDL manual and pass the knowledge tests. Every state publishes a CDL manual built on the federal model, and the knowledge tests are drawn from it. You take them at the state licensing agency: General Knowledge for every applicant, plus the additional tests your vehicle and endorsements require, each passed at 80%. Passing earns you the next step — the permit.
  3. Receive your Commercial Learner’s Permit (CLP). The CLP lets you practice driving a commercial vehicle on public roads while accompanied by a licensed CDL holder. Federal rules require you to hold it for at least 14 days before the skills test; states set their own validity periods and conditions on top of that floor.
  4. Complete Entry-Level Driver Training (ELDT). Since February 2022, federal rules require entry-level drivers to complete ELDT — theory instruction and behind-the-wheel training — from a provider listed on the FMCSA Training Provider Registry. ELDT applies when you obtain a Class A or Class B CDL for the first time, upgrade from Class B to Class A, or obtain a hazardous materials, passenger, or school bus endorsement for the first time. The provider reports your completion to the registry, and the state checks it before scheduling your skills test. No practice program — including this one — can substitute for ELDT.
  5. Pass the skills test. The skills test has three parts: a pre-trip vehicle inspection, basic vehicle control, and on-road driving. It is administered by the state licensing agency or a state-approved third-party tester, in a vehicle of the class your license will cover. Training and supervised practice under your CLP are how you prepare for it — written practice is not.
  6. Receive the CDL from your state. With the knowledge tests, ELDT, and skills test complete, the state issues the license itself, in the class and with the endorsements you tested for — never a practice provider.

The license classes

The class of CDL you need follows the vehicle. Class A covers combination vehicles with a gross combination weight rating of 26,001 pounds or more, where the towed vehicle exceeds 10,000 pounds — the tractor-trailer class. Class B covers a single vehicle of 26,001 pounds or more, and combinations below the Class A threshold — straight trucks, large buses, and dump trucks are typical. Class C covers smaller vehicles that transport hazardous materials requiring placards, or that are designed to carry 16 or more passengers including the driver. Your class determines which knowledge tests sit on your path: Class A applicants add the Combination Vehicles test to General Knowledge, and most Class A and B vehicles also require the Air Brakes test.

The knowledge tests and endorsements

Knowledge testReal test lengthPassing standardWho takes it
General Knowledge50 questions80%Every CDL applicant, for every license class
Air Brakes25 questions80%Applicants who will drive a vehicle equipped with air brakes; skipping or failing it puts an air-brake restriction on the license
Combination Vehicles20 questions80%Class A applicants and anyone who will drive combination vehicles
Hazardous Materials30 questions80%The HazMat endorsement, for hauling hazardous materials requiring placards; the endorsement also involves a federal security threat assessment
Tank Vehicles20 questions80%The tank vehicle endorsement, for hauling liquids or gases in bulk tanks
Doubles and Triples20 questions80%The doubles and triples endorsement, for pulling two or three trailers
Passenger Transport20 questions80%The passenger endorsement, for driving vehicles designed to carry 16 or more passengers including the driver
School Bus20 questions80%The school bus endorsement, taken in addition to the passenger endorsement by school bus drivers

Endorsements are added to a license, and each one has its own knowledge test. The hazardous materials endorsement carries an additional federal step beyond the test: a TSA security threat assessment, including fingerprinting, which runs on its own timeline — start it early. The school bus endorsement builds on the passenger endorsement: you pass the Passenger Transport test as well as the School Bus test. Air Brakes works differently: it is a qualification test rather than an endorsement, and a driver who does not pass it carries a restriction against driving air-brake-equipped vehicles.

The 80% passing standard

CDL knowledge tests are passed at 80% — the standard set under FMCSA’s federal framework and applied by the states that administer the tests. In practical terms: at least 40 of 50 on General Knowledge, 24 of 30 on Hazardous Materials, 20 of 25 on Air Brakes, and 16 of 20 on each of Combination Vehicles, Tank Vehicles, Doubles and Triples, Passenger Transport, and School Bus. The standard applies per test, not across tests: a strong General Knowledge score does not offset a shortfall on an endorsement test. If you fall short, state rules govern retesting, including waiting periods and fees. The preparation target follows directly: schedule your visit when you are clearing 80% consistently, with margin, on every test your license requires — not when you are scoring near it.

State DMV administration

Although the standards are federal, the licensing is state business end to end. Your state licensing agency — the DMV or its equivalent — publishes the state CDL manual, administers the knowledge tests, issues the CLP, verifies your ELDT completion against the federal registry, oversees the skills test, and issues the CDL. States set their own fees, procedures, appointment systems, retest rules, and any requirements above the federal floor. Two consequences matter for preparation. First, study your own state’s manual: the tests follow the federal model closely, but the manual of the state that will test you is the text to work from. Second, verify every procedural fact — fees, scheduling, what documentation to bring, how long your CLP lasts — with your state agency, because those details are state-specific and they change. FMCSA is the authority for the standards themselves: the license classes, the ELDT requirement, and the Training Provider Registry.

How to prepare, test by test

  • General Knowledge (50 questions, 80% to pass): the broadest test and the one everyone takes. Work through the whole manual rather than selected chapters: vehicle inspection, basic control, shifting, seeing, communicating, speed and space management, night and extreme conditions, hazard perception, cargo, and the fitness rules. Prepare until your practice scores clear 80% with margin, not at it.
  • Air Brakes (25 questions, 80% to pass): focus on how the system works — compressors, reservoirs, dual systems, spring brakes, and the low-air warning — plus inspection points and safe use, including how air brakes change stopping distance. Understanding the system carries most of the test.
  • Combination Vehicles (20 questions, 80% to pass): concentrate on coupling and uncoupling procedures in order, inspecting the combination, rollover risk and rearward amplification, and how a rig handles differently from a straight truck.
  • Hazardous Materials (30 questions, 80% to pass): the longest endorsement test and the most rule-dense. Classification, shipping papers, placarding rules and thresholds, loading and segregation, and incident responsibilities all appear. Give it the most study time of any endorsement, and start the TSA threat assessment early, in parallel.
  • Tank Vehicles (20 questions, 80% to pass): the physics of liquid loads — surge, baffling, bulkheads, and outage — plus tank inspection and the driving adjustments bulk liquid demands, especially on curves.
  • Doubles and Triples (20 questions, 80% to pass): converter dollies and coupling order, which trailer rides where and why, inspecting multiple-trailer rigs, and the stability limits that make doubles and triples less forgiving than a single trailer.
  • Passenger Transport (20 questions, 80% to pass): passenger loading and unloading, safety rules, prohibited practices such as fueling with passengers aboard, railroad crossings, and the inspection items specific to buses.
  • School Bus (20 questions, 80% to pass): student loading and unloading and the danger zone around the bus, warning lights and stop arms, railroad-crossing procedure, mirror use, and emergency evacuation — the most procedure-specific endorsement test, where the manual’s exact sequences are worth learning as written.

A study plan using the practice program

Our free practice program holds 1,204 questions across the eight tests — General Knowledge (368), Air Brakes (145), Combination Vehicles (125), Hazardous Materials (175), Tank Vehicles (77), Doubles and Triples (91), Passenger Transport (101), and School Bus (122) — with an explanation for every answer, in quizzes drawn at the real test lengths and scored at the real 80% standard. A sensible order:

  1. Read your state CDL manual first, alongside this guide, so the practice questions land on top of the manual’s own explanations rather than replacing them.
  2. Work General Knowledge until you clear 80% consistently — the 50-question quiz, repeated with fresh draws from the 368-question bank, until the score holds above the line across several attempts.
  3. Add the qualification tests your vehicle requires — Air Brakes and, for Class A, Combination Vehicles — and bring each to the same consistent-clear standard on its own quiz.
  4. Take endorsements one at a time, in the order your work requires them, giving Hazardous Materials the largest block of time and starting its federal threat assessment early.
  5. Re-run your weakest quiz last before your appointment. Every score is read against 80% — the real published standard — so a consistent clear in practice is the honest signal that you are ready for the state agency’s test.

Start practicing: General Knowledge Practice · Air Brakes Practice · Combination Vehicles Practice · Hazardous Materials Practice · Tank Vehicles Practice · Doubles and Triples Practice · Passenger Transport Practice · School Bus Practice.

Where to verify everything

Federal standards come from the Federal Motor Carrier Safety Administration (FMCSA) — including the ELDT rules and the Training Provider Registry where registered training providers are listed. Everything about your own application — the state CDL manual, test scheduling, fees, permit rules, and retest policy — comes from your state licensing agency. The hazardous materials endorsement’s security threat assessment is a TSA process. If anything in this guide and anything your state agency publishes ever differ, your state agency controls your application.

PassProfessor is an independent practice provider. This guide is free practice only: PassProfessor does not issue CDLs or CLPs, does not administer CDL tests, and is not a state DMV or any state licensing agency. Real CDL knowledge tests are taken at your state licensing agency, and Entry-Level Driver Training from a provider on the FMCSA Training Provider Registry is required before the skills test — this knowledge-test practice does not satisfy ELDT.

More free practice: CDL Practice Tests — the PassProfessor family hub for this practice.

How hard are the CDL tests? Our breakdown — How hard is the CDL exam? — sets out the per-test 80% standard, the question counts for each test, and why no national pass rate exists.