South Dakota’s working plumber credential is named simply Plumber, and its examination — administered in person by the State Plumbing Commission on the 2024 Uniform Plumbing Code as the state adopted it — runs in three parts: code questions with the code allowed, code questions with the code forbidden, and a written drawings sizing exercise, passed at 70 percent. This guide covers the credential, each part in turn, and the route between them. The companion program page is at /south-dakota-journeyman-plumber-exam-prep/.
This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.
The credential at a glance
| Item | Verified position |
|---|---|
| Program | South Dakota Plumber: the class named simply Plumber (no journeyman or master class name); a contractor level stands separately in the system |
| Regulator and administrator | State Plumbing Commission — Commission-administered examinations at in-person sittings; no examination vendor |
| Examination basis | 2024 Uniform Plumbing Code (UPC) as adopted in the state plumbing code, with South Dakota amendments and exclusions — UPC Chapter 5 and Chapters 12–14 are excluded |
| Part 1 | Code questions; code allowed; up to 2 hours |
| Part 2 | Code questions; code forbidden; up to 2 hours |
| Part 3 | Drawings sizing exercise — size stacks, wastes, and vents and insert pipe sizes; up to 1 hour; code forbidden for plumbers; a written exercise, not a hands-on practical |
| Passing standard | 70 percent for Plumber (80 percent for the contractor level, as ladder context) |
| Question counts | Not published — no count is stated for any part |
| Fees in the verified record | Application $50; examination and re-examination $100; licence and annual renewal $105 |
| Continuing education | 4 hours, binding plumbers at renewal |
| Administrator note | PassProfessor is independent and is not affiliated with the State Plumbing Commission |
South Dakota’s examination is the most structurally distinctive in this batch: one Commission, one adopted code, and a sitting that deliberately changes its terms three times. A candidate can know the code and still be unprepared for this examination if that knowledge exists in only one mode. The guide therefore treats the parts separately before it treats the code, because in South Dakota the modes are examined content in themselves.
Reading the verified facts
Three disciplines govern the facts here. First, naming discipline: the class is Plumber. Material that renames it with titles borrowed from other states misstates the credential, however accurate its code content may be, and candidates should hold the Commission’s own name for the class they are entering. Second, label discipline: the examination’s book position is a per-part fact, never a whole-sitting fact. Any summary that attaches one book description to the entire examination has flattened the structure the Commission built, and this guide states the rule part by part wherever the subject arises. Third, silence discipline: the Commission publishes no question counts for the parts. Secondary material that assigns counts is assigning numbers the primary record does not contain, and preparation paced by invented counts is paced by air; this guide prints none, and organises pacing by the published time allowances instead — two hours, two hours, one hour — which are verified and sufficient.
The route, step by step
Step one — confirm the class. The intended credential is Plumber, the examined working class; the contractor level is a separate candidacy at its own 80 percent standard. Step two — apply to the Commission and pay the $50 application fee. Step three — prepare on the adopted code: the 2024 UPC as South Dakota adopted it, excluded chapters marked, amendments carried, in all three modes the parts demand. Step four — sit the three parts in person under the Commission’s arrangements: Part 1 with the code allowed inside two hours, Part 2 with the code forbidden inside two hours, Part 3 sizing drawings inside one hour with the code forbidden, and reach the 70 percent standard. Step five — hold and renew: the licence at $105, renewed annually at $105, with 4 hours of continuing education binding plumbers at renewal. If a sitting must be retaken, the re-examination fee in the verified record is $100, the same figure as the examination fee.
The three parts in full
Part 1: code questions, code allowed, up to two hours
Part 1 examines the candidate as a code user. With the 2024 UPC as adopted in hand, the questions test whether the candidate can locate the governing provision, read it in its amended South Dakota form where an amendment applies, and apply it to the system described. The skill is navigation under time: two hours sounds generous until it is spent hunting through an unfamiliar organisation, so fluency in the UPC’s structure — where sizing lives, where protection lives, where the general requirements sit — is itself examined content. Candidates should also carry the exclusions into this part: time spent searching Chapter 5 or Chapters 12–14 for a governing provision is time spent in text South Dakota has not adopted, and provisions found there cannot ground a credited answer.
Part 2: code questions, code forbidden, up to two hours
Part 2 examines the same code as knowledge. The book is closed, and the questions test the provisions a working plumber is expected to carry: sizing methods and their logic, trap and vent principles, materials and joint rules, protection requirements, and the prohibitions that recur across installations. This part is where breadth is audited. A candidate whose knowledge is deep in two systems and thin elsewhere meets questions drawn from the thin places with nothing to consult, and the two hours reward steady retrieval over brilliance in a corner. Preparation for Part 2 is therefore deliberately encyclopaedic at the code’s core: the tables’ shapes, the methods’ steps, and the rules’ reasons, learned well enough to be produced rather than recognised.
Part 3: the drawings sizing exercise, up to one hour, code forbidden
Part 3 changes the task. The candidate receives drawings and must size stacks, wastes, and vents and insert the pipe sizes on the drawing, inside one hour, with the code forbidden for plumbers. Three clarifications matter, and this guide states them exactly. The exercise is written: sizes are computed and written onto drawings; nothing is cut, joined, or assembled, and no tools or materials are involved. It is therefore not a hands-on practical, and no candidate should arrive expecting bench work — nor should any preparation provider claim to rehearse a practical this credential does not contain. What it does examine is sizing as production: reading a drawn system whole, assigning loads, carrying the adopted code’s methods from memory, and committing defensible sizes to the page under the sitting’s shortest clock. Of the three parts it is the closest to the daily act of laying out work, and the least forgiving of sizing knowledge that exists only as recognition.
The plumbing outline beneath the parts
No per-area blueprint and no question counts are published, and this guide invents none; the areas below are the adopted code’s working subjects, which the three parts draw on in their different modes.
Drainage, waste, and vent systems
The drainage system is the examination’s centre of gravity, because Part 3 is built from it. Candidates must command drainage fixture unit loads, the sizing of horizontal wastes and vertical stacks, vent sizing and arrangement, slopes, and cleanouts — as navigable provisions for Part 1, as retained knowledge for Part 2, and as performed computation for Part 3. The three-mode demand is the point: a method the candidate can look up but not reproduce will serve in the first part and fail in the other two, and study should be audited against that standard area by area.
Water supply and distribution
Supply is examined as design under pressure: fixture unit demand, distribution sizing, and the protection of the potable system, including backflow prevention and cross-connection control as the adopted code states them. The same three-mode logic applies — tables to be found quickly, methods to be known outright — and candidates should be able to explain, not merely apply, why a given hazard class draws a given protective requirement, because closed-book questions reward the reasoning that survives when the table is absent.
Traps, interceptors, fixtures, and components
Trap construction and seal protection, prohibited arrangements, interceptors, fixture installation requirements, and water heater provisions form the examination’s component layer. These subjects read as detail and are examined as judgement: described installations containing one defect, described sites requiring one separation, described fixtures requiring one clearance. In Part 2’s closed condition they test whether the candidate’s daily formation has actually deposited the code’s requirements where memory can reach them.
Materials, joints, and general requirements
The adopted code’s general chapters — approved materials, joints and connections, support and protection of piping, and testing of completed work — supply the connective tissue of all three parts. They are the provisions most likely to be under-studied, precisely because they belong to every job rather than to one system, and the Commission’s closed-book part is well designed to discover that neglect.
The code position in depth: adopted is tested, with exclusions
South Dakota spared its candidates the edition gap that complicates several neighbouring states: the examination is given on the code the state has adopted, the 2024 UPC carried in the state plumbing code. The precision work lies in the adoption’s shape. The state code adopts the 2024 UPC with South Dakota amendments and exclusions, and excludes UPC Chapter 5 and Chapters 12 through 14. An unmarked national copy of the 2024 UPC is therefore not quite the South Dakota study text: it contains chapters the state has set aside and unamended passages the state has changed. The candidate’s copy should be conformed to the adoption before serious study begins — excluded chapters flagged as outside South Dakota law, amendments interleaved with the provisions they alter — because every part of the sitting, and most of all the closed parts, will otherwise train on text that is not quite the text in force.
The UPC identity of the code matters as well. Candidates formed under IPC-based systems will find different organisation, different terminology, and differently built sizing methods, and should budget conversion time honestly: South Dakota examines inside the UPC system, on the UPC’s own terms, and fluency in a different model code transfers as judgement but not as citation-level command.
The sitting itself
The sitting is in person and Commission-administered, in three parts with published allowances of up to two hours, two hours, and one hour. The standard is 70 percent for the Plumber class. Candidates should plan the day as three distinct performances rather than one long examination: a navigational performance with the code in hand, a knowledge performance without it, and a production performance on drawings, also without it, on the shortest allowance. Between the parts, the working rules reverse and reverse again, and the candidates who manage the transitions deliberately — setting the book aside mentally as firmly as physically when the forbidden parts begin — protect themselves from the sitting’s most available error, which is carrying one part’s habits into another part’s conditions.
Because no question counts are published, pacing cannot be rehearsed against counts; it is rehearsed against clocks. Practice should be organised in the parts’ own units — two-hour sets, two-hour sets, one-hour drawing exercises — so that the felt pace of each condition is familiar before the day. A re-examination, where needed, is priced in the verified record at $100, the same as the examination itself.
A study plan built on how this examination is actually put together
Sequence the work by mode, since mode is what the sitting varies. First, the adopted code once through, conformed: build the map of the 2024 UPC as South Dakota adopted it, exclusions flagged and amendments in place, so that everything later is learned in the correct text. Second, navigation training for Part 1: timed lookups and applications with the code in hand, until locating a governing provision is a matter of seconds and applying it is where the time goes. Third, knowledge training for Part 2: the sizing methods, core tables’ logic, prohibitions, and protection requirements rehearsed closed-book until they can be produced on demand, with weak areas identified by honest unaided testing rather than by rereading. Fourth, drawing training for Part 3: repeated written sizing exercises on drawn systems — stacks, wastes, and vents sized and marked within the hour, from knowledge — because performed sizing is a skill that only performed practice builds. Fifth, integrated rehearsal: the three modes run in the sitting’s own order and allowances, so the transitions between conditions are practised as deliberately as the content inside them.
The working method: turning the outline into a performance
The method for South Dakota is mode-sorting. Label every practice item by the part it trains. Navigation items, knowledge items, and drawing items are different exercises wearing similar clothes, and a study log that does not distinguish them cannot show the candidate where the risk sits. Sort every error by mode as well as by subject. A sizing miss with the book in hand is a navigation or method error; the same miss closed-book is a retention error; the same miss on a drawing is a production error. The cures differ — drill the lookup, rebuild the memory, or repeat the performed exercise — and time spent on the wrong cure is wasted twice. Rehearse the closures. At planned points in every week, the book goes away entirely and work continues without it, so that the forbidden condition becomes ordinary rather than alarming. Finish drawings. Part 3 practice is not done when the method is understood; it is done when a complete drawing carries defensible sizes inside the hour, checked afterwards against the adopted code. The habit of finishing, under the clock, in writing, is the whole of that part’s preparation.
The errors this examination is built to catch
South Dakota’s sitting is built to catch mode errors and adoption errors. Preparing in one mode — studying entirely with the code open, as many candidates naturally do — leaves two of three parts unrehearsed and is the commonest structural failure available. Describing or expecting the whole sitting under one book rule misprepares whichever parts the description gets wrong; the parts differ, and the difference is deliberate. Studying the excluded chapters as law — answering from Chapter 5 or Chapters 12–14 material — fails against an adoption that has set that text aside. Expecting a hands-on practical misreads Part 3: it is a written sizing exercise, and the candidate who arrives braced for bench work has misunderstood the task the hour actually contains. Importing another state’s titles and figures — renaming the class, or pacing by question counts the Commission has not published — fails the naming and silence disciplines the credential runs on. And treating the contractor level’s 80 percent as the Plumber standard misstates the candidate’s own target: 70 percent governs this class, with 80 percent belonging to the level above.
South Dakota in one view
South Dakota in one view is a plainly named credential examined with unusual honesty about what competence consists of. The state calls the class Plumber, gives the examination itself in person, and tests the adopted 2024 UPC three ways: whether the candidate can use it, whether the candidate knows it, and whether the candidate can produce sizes from it onto a drawing. Around the sitting stand plain economics — $50 to apply, $100 to sit and the same to sit again, $105 for the licence and for each annual renewal, 4 hours of continuing education at renewal — and one verified absence: no state bond or insurance minimum stands in the record for this class. The candidate who prepares in three modes, on the conformed adopted text, with the excluded chapters set aside, has understood the examination the Commission designed; the candidate who prepares in one mode, on an unmarked national copy, has prepared for a sitting South Dakota does not give.
After the sitting: the credential and its clock
Passing at 70 percent converts candidacy into the Plumber licence at $105, and the credential then runs on an annual rhythm: renewal at $105 each year, with 4 hours of continuing education binding plumbers at renewal. The annual cycle is short enough that the education hours are best treated as a standing habit rather than a deadline event. The working duties beneath the cycle are the ordinary ones of the class, performed under the same adopted code the examination tested — the 2024 UPC in its South Dakota form, exclusions and amendments included — so the discipline that governed preparation simply continues into practice: work to the adopted text, size from knowledge where the situation demands it, and keep the credential’s plain name and plain economics in their exact forms.
Frequently asked questions
What is the credential called?
Plumber. South Dakota names the class simply Plumber; there is no journeyman or master class name for this credential, and the contractor level is a separate level in the system.
Who administers the examination, and where?
The State Plumbing Commission administers it, at in-person sittings. No examination vendor is involved in this credential.
What code governs the examination?
The 2024 Uniform Plumbing Code as adopted in the state plumbing code, with South Dakota amendments and exclusions. UPC Chapter 5 and Chapters 12–14 are excluded. The tested code and the adopted code are the same code in South Dakota.
What are the three parts?
Part 1: code questions with the code allowed, up to two hours. Part 2: code questions with the code forbidden, up to two hours. Part 3: a drawings sizing exercise, up to one hour, with the code forbidden for plumbers.
Can the code book be used throughout?
No. It is allowed in Part 1 and forbidden in Parts 2 and 3, and no single book label honestly describes the whole sitting.
What exactly happens in Part 3?
The candidate is given drawings and must size stacks, wastes, and vents and insert the pipe sizes on the drawing. It is a written exercise on paper.
Is Part 3 a hands-on practical?
No. Nothing is cut, joined, or assembled, and no tools or materials are involved. Part 3 is a written sizing exercise, not a practical.
How many questions are in each part?
No question counts are published by the Commission, and this guide states none. The published measures are the time allowances: two hours, two hours, and one hour.
What score passes?
70 percent for the Plumber class. The contractor level’s standard is 80 percent.
What fees does the verified record state?
Application $50; examination $100, with re-examination also $100; licence $105, with annual renewal also $105.
What continuing education does renewal require?
4 hours, binding plumbers at renewal.
Does South Dakota set a bond or insurance minimum for Plumbers?
No state bond or insurance minimum is set in the verified record for this class.
Is PassProfessor affiliated with the State Plumbing Commission?
No. PassProfessor is an independent preparation provider. The Commission alone examines and licenses South Dakota plumbers.
When does enrollment open for the PassProfessor program?
The program is in the works and enrollment is not yet open. Leave an email address on this page and PassProfessor will write to you when the program is ready — and only about this program.
