Oklahoma licensure for plumbing contractors is administered by the Construction Industries Board under the Plumbing License Law of 1955. The unlimited Plumbing Contractor sits two open-book portions through PSI — a trade portion of 85 questions in 180 minutes and a Plumbing Business and Law portion of 50 questions in 120 minutes — with the trade standard at 70% (60 of 85) effective November 1, 2026 and the Business and Law standard at 75% (37 of 50). The PassProfessor Oklahoma Plumbing Contractor program, described at /oklahoma-master-plumber-exam-prep/, prepares candidates for both portions.
This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.
The credential at a glance
| Item | Verified position |
|---|---|
| Program | Oklahoma Plumbing Contractor (unlimited) — the top examined tier under the Plumbing License Law of 1955 |
| Regulator | Oklahoma Construction Industries Board (CIB), under Title 59, sections 1001 et seq., and OAC Title 158, Chapter 30 |
| Examination vendor | PSI Services LLC — Candidate Information Bulletin effective September 11, 2026 |
| Examination structure | Two portions, both required: Trade (Plumbing Contractor and Natural Gas) — 85 questions, 180 minutes, open book; Plumbing Business and Law — 50 questions, 120 minutes, open book |
| Passing standards | Trade portion: 70% (60 of 85), effective November 1, 2026. Business and Law portion: 75% (37 of 50). The two standards are stated separately, as published |
| Tested editions | Candidate choice: the 2018 or 2024 editions of the International Plumbing Code and the International Fuel Gas Code, each with Oklahoma Revisions — see the transition section below |
| Examination fee | $92 per portion through PSI — $184 for a contractor candidate’s two portions |
| Licensing total | $330.00 to the Construction Industries Board: a $300.00 licence fee plus a $30.00 application processing fee |
| Practical component | None. Every portion is a computer-administered, open-book examination; isometric content is analysis inside the trade portion, not drawing production |
| Administrator note | PassProfessor is independent and is not affiliated with the Oklahoma Construction Industries Board |
This guide begins with a correction, continues with a split, and stays inside a transition: the credential’s name, a passing standard that exists only as two portion standards, and a code edition currently chosen by the candidate while the adopted code has already moved.
Reading the verified facts
Facts here carry their layer with them. The examination layer is the PSI Candidate Information Bulletin effective September 11, 2026, hosted by the Board itself. The licensing layer is the Plumbing License Law of 1955, the regulations at OAC Title 158, Chapter 30, and the Board’s application material. The code-adoption layer belongs to a different body — the Oklahoma Uniform Building Code Commission — and is never merged with the licensing layer. Where layers conflict, this guide reports the conflict and keys neither side; that matters most for the unlimited examinations’ retirement date and for retake waiting periods, which are not stated here at all because the layers disagree.
The retired name, and the two contractor licences
Oklahoma has no master plumber licence class. Title 59, section 1003(7) defines that term only to retire it: the term belongs to laws which have been repealed, and a person formerly known by it is henceforth to be known as a plumbing contractor. Older statutory text still using the older wording is legacy language for the contractor class, not a separate licence. There is likewise no provisional trade licence and no specialty plumbing class in the record, and Plumbing Inspector is not a Plumbing License Law class — it belongs to a separate programme under the Oklahoma Inspectors Act.
The top of the system holds two contractor licences. The Plumbing Contractor licence — the unlimited licence this guide covers — authorises its holder, in the statute’s definition, as a person skilled in the planning, superintending, and practical installation of plumbing who may operate as an individual, firm, partnership, limited liability company, corporation, or other legal entity to engage in the business of plumbing, contracting to do plumbing and furnishing labour or materials or both. The Residential Plumbing Contractor licence is a separate licence, examined separately, and stated separately wherever the record distinguishes it — most sharply in the examination references, where the residential trade examination is built on the International Residential Code and lists no plumbing code and no fuel gas code, while the unlimited trade examination is built on the International Plumbing Code and the International Fuel Gas Code.
Beneath the contractor tier, an unlimited journeyman must be employed and supervised by a licensed plumbing contractor, may not contract independently, and may supervise up to three apprentices — the rule maximum, both employed by the same contractor. The distance between the tiers is therefore not mainly technical: it is the distance between working inside someone else’s business and answering for the business itself — which is why the contractor tier adds a Business and Law examination the journeyman tier does not sit.
The authorities, kept in their own roles
The Construction Industries Board licenses Oklahoma plumbers statewide under the Plumbing License Law of 1955, cited in the bulletin as Title 59, Chapter 27, sections 1001 et seq. The Board has seven Governor-appointed members — two plumbing (one contractor, one journeyman), two electrical, two mechanical, and one inspector — and is advised on plumbing examinations by the five-member Oklahoma State Committee of Plumbing Examiners. Eligibility is determined by the Board, not the vendor: the Board approves, the applicant’s information is forwarded to PSI, and the candidate schedules with PSI. There is no expiration on that eligibility.
Code adoption belongs to the Oklahoma Uniform Building Code Commission, a separate body acting under OAC Title 748, Chapter 20. The Board licenses people; the Commission adopts codes. A candidate who attributes the adopted edition to the Board, or the licence to the Commission, has merged two roles Oklahoma deliberately keeps apart — and the distinction is examinable, because the Business and Law outline contains a Licensing Requirements block that tests exactly this kind of structural knowledge.
The vendor is PSI Services LLC, verified from three primary layers: the bulletin states that the Board has contracted with PSI to conduct its examination programme, the Board’s packet forwards approved applicants to PSI, and the bulletin of record was retrieved from the Board’s own hosting. Where vendor and Board material differ, this guide follows the bulletin for examination mechanics, as the research record adjudicates.
The route, step by step
Step one — qualify. Be 18 years of age or older, and meet the journeyman requirements with one additional year of experience, as the eligibility section sets out. Step two — apply to the Construction Industries Board and have eligibility determined there; approval is forwarded to PSI. Step three — schedule with PSI and pay $92 per portion. Step four — sit both portions, each open book and computer-administered, with the score given immediately on screen. Step five — meet each portion’s own standard: 70% (60 of 85) on the trade portion effective November 1, 2026, and 75% (37 of 50) on Business and Law. Step six — activate the licence by filing the $5,000 corporate surety bond payable to the Board and the certificate of insurance evidencing a minimum $50,000 commercial general liability policy; the licence stays inactive until both are received. Step seven — hold and renew inside a term of no longer than one year expiring on the last day of the birth month, with the continuing education position described below. Regular examinations must be held at least twice each year.
The sitting itself, in full
Both portions are open-book, computer-administered examinations. One question appears on screen at a time; return-and-change is permitted, so a candidate may revisit and revise answers inside the portion. A pre-examination tutorial of up to 15 minutes does not count against examination time. Up to ten unscored experimental questions may be administered inside a portion; they are not scored, and their time does not count against examination time. The score is given immediately on screen.
The open-book rules are strict and enforced. Candidates bring their own references, highlighted, underlined, and indexed before the session only. No writing in references is permitted before or during the sitting; a reference written in is subject to confiscation and a report. Only permanent tabs are allowed, and a silent, non-printing, non-programmable calculator is permitted. A missed appointment, late cancellation, or arrival without proper identification renders the registration invalid and the fee forfeited. At these paces, a candidate who knows the material but searches slowly will feel the clock.
There is no third sitting behind the two portions. No practical examination, hands-on component, drawing-production exercise, or separately administered isometric test appears in any Oklahoma primary source. The rule layer’s general statement that an examination includes written questions and drawings and charts describes content inside the written examination, not a separate component.
The outlines in full
All four Oklahoma trade examinations — Contractor, Journeyman, Residential Journeyman, and Residential Contractor — share one identical ten-topic outline totalling 85 questions. For the unlimited contractor candidate it reads: General Plumbing Knowledge and Regulations — 10 items, the regulatory frame of the trade; Water Supply — 10; Drains and Sewers — 10; Fuel Gas — 10, a full block in every plumbing trade examination, which is why any separate Oklahoma plumbing-gas offering should be treated with suspicion — the gas content is already inside this examination; Vents — 13, the largest single topic in the outline, so a plan that treats the ten topics as equal misreads the printed weights; Piping, Valves, and Control Valves — 8; Fixtures and Equipment — 8; Isometric Analysis — 7, in which candidates analyse isometric drawings inside test items — the skill is reading a depicted system and answering from it, and no drawing is produced; Traps, Interceptors, Indirect, and Special Waste — 5; and Safety — 4, drawn from the occupational safety layer the reference list carries into the room.
Trade references for the unlimited examination are the International Plumbing Code and the International Fuel Gas Code in the tested editions below, Mathematics for Plumbers and Pipefitters, 8th Edition, 2013, and OSHA 29 CFR Part 1926 (a PSI Selections volume is also listed). The residential trade examinations substitute the International Residential Code for the two model codes, with OSHA and Mathematics — in effect, the two licences’ scopes written as a reading list.
The Plumbing Business and Law portion — 50 questions, 120 minutes, open book — is required of all contractor candidates and of no journeyman candidates, and a reciprocity contractor must pass it as well. Its outline: Bidding and Estimating — 10. Financial — 8. Project Management and Supervision — 7. Licensing Requirements — 6. Contracts — 5. Labor and Personnel — 5. Payroll and Payroll Taxes — 5. Risk Management — 4. Its reference list is the Oklahoma layer of the examination: the Board’s Unofficial Administrative Rules and Courtesy Exam Study Aids Book (current edition); the Oklahoma Plumbing License Law of 1955; OAC Title 158 Chapters 30 and 10; Oklahoma Lien Law; the NASCLA Contractors Guide, Basic 14th Edition; and the Oklahoma Workers’ Compensation Act. Generic national material alone leaves the Oklahoma-specific majority of that list unopened, in an open-book sitting where those are precisely the volumes permitted in the room.
The passing standards, in their layered form
The publishable position, and the whole of what a candidate should carry into the sitting, is this: the trade portion standard effective November 1, 2026 is 70% — 60 items correct of 85; the Business and Law portion standard is 75% — 37 of 50, the printed raw figure.
How that position is built explains why no simpler sentence will do. The bulletin prints every trade-examination header with a dated note that, effective November 1, 2026, the passing percentage becomes 70% with 60 items correct — and prints no such note on the Business and Law header, which continues to state 75% with 37 raw. The 2026 statute, Enrolled House Bill 3462 effective the same date, sets a passing grade of not less than seventy percent, concurring with the trade movement. Older rule and form material printing a uniform percentage belongs to the period before that date. The research record adjudicates the bulletin as governing for examination mechanics, and this guide follows it exactly: the split above, with the Business and Law figure never recomputed and the trade movement never extended to a portion it was not printed for. Whether the Business and Law standard changes later is unpublished.
Tested edition and adopted code: the transition in full
The adopted layer moved first and is not in dispute. Effective September 14, 2026, Oklahoma’s statewide minimum codes are the 2024 editions of the International Plumbing Code (first printing June 2023), the International Residential Code (second printing October 2024), and the International Fuel Gas Code, each as amended and modified by the Uniform Building Code Commission at OAC Title 748, Chapter 20. The 2021 editions were expressly not adopted for any purpose. No International Plumbing Code 2024 appendices form part of the statewide minimum, though a local jurisdiction may adopt them. Before September 14, 2026, the adopted editions were the 2018 editions.
The tested layer for the unlimited trade examinations is a candidate choice between those same two generations: the 2018 or the 2024 editions of the International Plumbing Code and the International Fuel Gas Code, each with Oklahoma Revisions. The bulletin prints the plumbing code line as the 2018 edition with the trailing sentences that starting October 8, 2026 the 2024 code can be used, and that as of December 14, 2026 the 2018 code will no longer be used or allowed; the fuel gas line is printed as the 2018 or 2024 edition with the same dates. The residential trade examinations carry the same choice on the International Residential Code, usable in its 2024 edition starting September 14, 2026.
The conflict sits in the unlimited examinations’ end date, and this guide keys neither side. The bulletin’s December 14, 2026 date cannot both be right with the Board’s own notice, which runs the unlimited transition through January 8, 2027 and places 2024-only testing as beginning January 9, 2027. For the residential examinations the sources agree in substance, but the unlimited candidate has no single settled retirement date, and this guide prints none. The consequences are threefold. Tested is not adopted: the adopted code is already 2024-only while the examination still offers a choice. Study must be edition-tagged: an item whose answer flips between editions has no safe answer until the candidate knows which edition governs the sitting. And a candidate sitting inside the contested window should confirm the position with the Board against the current bulletin, because the transition will close and the choice with it.
Eligibility in depth
All applicants must be 18 years of age or older. The contractor rule is then stated as an addition, and its form matters: a Plumbing Contractor applicant must meet the same requirements as applicants for the journeyman plumber examination, with an additional one year of experience — four years in total. The journeyman base is three years of experience in the plumbing trade while employed by a licensed plumbing contractor, or equivalent verifiable three years in the trade while serving in the United States Armed Forces, or a verifiable out-of-state plumbing licence, current and in good standing, which may expedite processing or be considered for reciprocity where a written agreement exists. One year of verifiable experience equals 2,000 hours. Experience obtained in Oklahoma counts only while the applicant maintains an apprentice registration on file, with the rules’ military, federal, and state-law exceptions noted in the rule layer. No hours figure for the journeyman total itself is stated in the primary record — the Board states years, and this guide states years.
Education substitutes at a printed scale, stated exactly: a Committee-approved associate degree or vocational diploma from a formal plumbing programme of at least 1,000 classroom hours substitutes for two years; 500 classroom hours for one year; 375 hours for three-quarters of a year; 334 hours for two-thirds of a year; and 250 hours for one-half of a year.
Reciprocity is a single named bridge. Arkansas is the only state named in any primary source, under a multi-year agreement with the Arkansas Committee of Plumbing Examiners effective October 21, 2024. Eligible applicants who held their licence at least one year, hold at least an unlimited journeyman licence, and passed a sponsored examination do not retake the journeyman test; every other state-specific requirement, including fees, continuing education, and insurance, still applies. A contractor applicant by reciprocity receives a journeyman licence by reciprocity and the contractor licence only upon passing the Oklahoma Plumbing Contractor Business and Law portion plus the bond and insurance requirements. No other reciprocity state is named here, because no other state is named in the record.
The Residential Plumbing Contractor stands separately here as everywhere in this guide: its trade examination is the residential examination above, and its Board total matches the unlimited contractor’s $330.00. This guide states no settled one-sentence residential scope or eligibility chain, because the 2024 rule layer and the 2026 statute layer differ on both points; a residential candidate should take the current position from the Board’s current application material.
Fees, activation, term, and continuing education
Fees come in two layers and are never blended. The vendor layer: PSI charges $92 per portion, not refundable or transferable, per registration whether a first attempt or a repeat — $184 for the two portions. The rule layer frames examination dollars as the examination’s actual cost, collected by the Board or its designee within the statute’s $200 administration cap; the $92 is the vendor-layer charge inside that frame. The Board layer: each contractor licence carries a $330.00 total — a $300.00 licence fee plus a $30.00 application processing fee — corroborated between the rule schedule at OAC 158:30-9-2(b) and the form totals. Contractor renewal is $200, with a $100 late fee effective after 30 days from expiration. The statute’s caps stand behind the schedule: application $30, examination administration $200, licence issuance $300, renewal $200.
Activation follows passing and precedes lawful operation: the licence stays inactive until the Board receives a $5,000 corporate surety bond payable to the Construction Industries Board and a certificate of insurance evidencing a minimum $50,000 commercial general liability policy. The term is no longer than one year and expires on the last day of the licensee’s birth month — a personalised calendar every Oklahoma licensee should mark, because it aligns with neither the calendar year nor anyone else’s renewal date.
Continuing education for renewal is at least six hours every three years — every 36 months preceding expiration — for journeyman and contractor alike, in a Committee-approved course with an approved instructor, covering the codes and revisions adopted by the Uniform Building Code Commission or other approved trade-related subjects. A licensee is exempt for three years from passing the current licensing examination, and no licence may be renewed unless the required education is complete.
A study plan built on how this examination is actually put together
First, split the plan by portion. The two portions have different outlines, reference lists, and passing standards, and they fail independently; track readiness per portion, never as one blended score. Second, allocate trade time by the printed outline — vents 13 of 85, and general knowledge, water supply, drains and sewers, and fuel gas ten each; fuel gas is not an elective. Third, study with an edition tag on every code session: each block belongs to the 2018 or the 2024 edition, with Oklahoma Revisions, matching the sitting; where an answer differs between editions, learn both answers with their tags. Fourth, build Business and Law from its own reference list — the licence law, OAC Title 158 Chapters 30 and 10, lien law, and the workers’ compensation act alongside the NASCLA Basic 14th Edition material — and practise finding provisions under time, because slow searching is the open-book sitting’s characteristic failure. Fifth, rehearse isometric reading as reading, in short, frequent drills. Sixth, finish under sitting conditions: timed practice at 85 questions against 180 minutes and 50 against 120, with references in their permitted form — highlighted, underlined, indexed, permanently tabbed, never written in.
The errors this examination is built to catch
Applying for a licence that does not exist — the retired name names no Oklahoma class. Quoting one pass figure — the standards are split, trade 70% (60 of 85) effective November 1, 2026 and Business and Law 75% (37 of 50). Studying the wrong edition layer — the adopted code is 2024, the tested edition is currently a choice, and trusting any single unlimited retirement date while the record conflicts risks a whole sitting. Neglecting Business and Law, whose references are Oklahoma volumes a trade-only plan never opens. Writing in the reference books — confiscation and a report, not a warning. Stopping at the pass — without the $5,000 bond and $50,000 insurance certificate, the licence stays inactive. Missing the birth-month term — the licence expires on the last day of the birth month, inside a term of no longer than one year.
After the sitting: the credential and its clock
Scores arrive immediately on screen, portion by portion. What follows is administrative but not optional: activation on bond and insurance, a term running to the last day of the birth month, and renewal at $200 with the education requirement running once the post-passing exemption lapses.
Frequently asked questions
Does Oklahoma offer a master plumber licence?
No. Title 59, section 1003(7) retires the term: a person formerly known by it is henceforth to be known as a plumbing contractor.
Who determines whether I may sit the examinations?
The Construction Industries Board, which forwards approved applicants to PSI for scheduling; there is no expiration on that eligibility.
What are the two contractor portions, exactly?
The trade portion, headed Plumbing Contractor and Natural Gas: 85 questions, 180 minutes, open book. The Plumbing Business and Law portion: 50 questions, 120 minutes, open book. Both are required, administered by PSI under the bulletin effective September 11, 2026.
What are the passing standards?
Trade 70% — 60 of 85 — effective November 1, 2026. Business and Law 75% — 37 of 50. Stated separately, as published.
When does the 2018 edition stop being offered for the unlimited examinations?
The sources conflict — the bulletin prints December 14, 2026; the Board’s notice runs through January 8, 2027, with 2024-only testing beginning January 9, 2027 — so no single date is stated. Confirm with the Board in that window.
Is any part of the Oklahoma examination hands-on or drawing-based?
No practical or drawing-production component exists. Isometric Analysis is seven analysis items inside the trade portion: candidates read isometric drawings; they do not produce them.
What experience and education count toward the contractor licence?
The journeyman requirements plus one additional year — four years total — at age 18 or older, with one verifiable year equal to 2,000 hours and the substitution scale stated in the eligibility section.
What must happen after I pass before I can operate?
Activation: a $5,000 corporate surety bond payable to the Board and insurance evidencing at least $50,000 of commercial general liability cover. The licence stays inactive until both are received.
Is PassProfessor affiliated with the Construction Industries Board?
No. PassProfessor is independent. The Board alone licenses and determines eligibility. The companion program page is at /oklahoma-master-plumber-exam-prep/.
When does enrollment open for the PassProfessor program?
The program is in the works and enrollment is not yet open. Leave an email address and PassProfessor will write to you when it is ready — and only about this program.
