Oklahoma Journeyman Plumber Exam Guide: The Single Trade Portion, the Open Edition Window, and the 60-of-85 Line

In Oklahoma the journeyman credential is the Journeyman Plumber licence, and there is no master class in the state. The trade examination administered through PSI is a single written portion of 85 questions in 180 minutes, open book, passed at 70 percent — 60 of 85 questions — with no practical and no drawing-production component in any portion. Unusually, the edition window is open: unlimited trade examinations currently test on the 2018 or the 2024 International Plumbing Code and International Fuel Gas Code while the system transitions to 2024 only, and the exact date the earlier edition retires is contested between PSI documents, so this guide states none. The PassProfessor Oklahoma Journeyman Plumber program prepares candidates for that trade portion and the Oklahoma choices layered on it. The companion program page is at /oklahoma-journeyman-plumber-exam-prep/.

This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.

The credential at a glance

ItemVerified position
ProgramOklahoma Journeyman Plumber: the journeyman trade portion of the Oklahoma licensing examinations
CredentialJourneyman Plumber. No master class exists in Oklahoma
VendorPSI
Trade portion85 questions / 180 minutes / OPEN BOOK / $92 per portion
Passing standard70 percent on the trade portion — 60 of 85 questions
Practical positionNO practical and NO drawing-production component in any portion. Isometric Analysis appears as 7 written items inside the portion
Tested editionsEdition window OPEN: unlimited trade examinations currently test IPC / IFGC 2018 or 2024, transitioning to 2024 only. The window is closing around December 2026 / January 2027; the exact retirement date is contested between PSI documents and NO exact date is stated
Adopted codeIPC 2024, effective September 14, 2026
Portions warningFive portions exist across the licensing examinations; Business and Law is contractors only — not this credential
State feesJourneyman application $25 plus issuance $50, $75 in total; renewal $75, plus a $25 late fee where it applies
Continuing education6 hours per 36 months
ReciprocityArkansas is the ONLY named state, under an agreement effective October 21, 2024
Companion program page/oklahoma-journeyman-plumber-exam-prep/
Administrator notePassProfessor is independent and is not affiliated with the Oklahoma regulator or with PSI

Oklahoma rewards the candidate who sorts four things before opening a code book: the credential’s true shape, the portion structure that separates the journeyman route from the contractor route, the edition that will actually govern the sitting, and the arithmetic of the pass line. Each sounds like administration. Each decides sittings. The credential’s shape frames the ladder — a journeyman licence with no master class above it. The portion structure frames the scope — one trade portion for this credential, inside a five-portion examination system whose Business and Law portion belongs to contractors alone. The edition window frames every answer, because for a limited period two editions of two codes are both live in the examination room while the adopted code stands at the later one. And the pass arithmetic frames the target in its most usable form: 60 of 85. This guide takes those four in order, then works through the systems the portion examines, the sitting itself, the route to the room, and a study method built for a single-portion, open-book, edition-split trade examination on the plains.

Reading the verified facts

Facts about this route live in distinct instruments, and keeping them separate prevents the commonest Oklahoma errors. The examination mechanics — the portion’s count and time, its open-book status, its fee, the pass standard, the isometric items, and the edition window — come from PSI’s published material for the Oklahoma licensing examinations, the vendor that administers the sittings. The code facts come from the code instruments and the adoption record: the IPC and IFGC in their 2018 and 2024 editions, and Oklahoma’s adoption of the IPC 2024 effective September 14, 2026. The credential facts — the absence of a master class, the state fee structure, the continuing education cycle, and the Arkansas reciprocity agreement effective October 21, 2024 — come from the state’s licensing structure as carried in the verified record.

Two disciplines run through everything that follows. The first concerns the edition window’s closing date: PSI documents state the earlier edition’s retirement inconsistently, so the verified record carries the position as contested, and this guide states no exact retirement date anywhere; a candidate who needs the operative date for a specific appointment must obtain it from PSI. The second is the standing one: where a figure is not carried in the verified record for this credential, this guide prints none rather than borrowing a plausible number from another state or the contractor side of Oklahoma licensing.

The route, step by step

Step one — name the credential correctly. Confirm that the work requires the Journeyman Plumber licence. Two naming errors wait at this step: searching for a master tier Oklahoma does not have, and absorbing the contractor examination structure — in particular the Business and Law portion — into a journeyman plan it does not belong to. Step two — apply to the state, with the journeyman application fee of $25. Step three — schedule the trade portion through PSI and pay the portion fee of $92; PSI administers the sitting, and its published material is the operative account of how the portion runs. Step four — decide the edition, explicitly. Inside the open window, unlimited trade examinations currently test on IPC and IFGC 2018 or 2024. The candidate’s appointment carries an edition position; confirm it through PSI, particularly for sittings near the turn of the year, when the window is closing around December 2026 and January 2027 and the exact retirement date of the earlier edition is contested. Then prepare from that edition and no other. Step five — sit the portion: 85 questions in 180 minutes, open book, and reach the trade passing standard of 70 percent — 60 of 85 questions. Step six — issuance and holding: on passing, the licence issues on payment of the $50 issuance fee, completing the $75 state total across application and issuance; renewal follows at $75, with a $25 late fee where it applies, and the licence is maintained with 6 hours of continuing education per 36 months. There is no step at which a preparation provider acts: PassProfessor prepares; PSI administers; the state licenses.

One arrival route sits beside the main route and should be stated with its boundary intact: reciprocity in Oklahoma names Arkansas only, under an agreement effective October 21, 2024. An Arkansas-licensed plumber follows that agreement. Every other out-of-state plumber should plan on the route above, because no other state is named.

The trade outline in full

The trade portion’s verified structure is stated in the at-a-glance table: 85 questions, one portion, with Isometric Analysis present as 7 written items. No further per-area counts are carried in the verified record, and this guide invents none. What follows states the trade systems the portion examines, in full, because in Oklahoma the written layer is the whole examination: the systems look familiar to anyone who has run pipe, and the portion tests them at the level of code application — finding the governing provision, in the edition being sat, and applying it to the building described — rather than at the level of trade recollection.

Drainage, waste, and vent systems

Drainage is the centre of gravity of the IPC as it is of any plumbing code, organised around fixture units, sizing tables, slope, cleanouts, and venting method. Candidates are examined on whether a described system will drain without losing its trap seals, whether cleanouts land where the code requires them, and whether the venting arrangement chosen is one the code permits for that configuration. The standard item describes a building and asks what the code requires of it; the candidate’s work is translation, from described work to governing provision to the answer that matches the edition in hand.

Water supply and distribution

The supply side is examined as a sizing and protection discipline. Water fixture units, distribution sizing, and pressure considerations decide whether a system delivers; backflow protection and cross-connection control decide whether it delivers safely. Items plant the hazard quietly — a hose bibb without protection, a submerged inlet, an unprotected branch — and credit the candidate who spots the protection duty before calculating anything. Across Oklahoma’s mix of municipal supply, rural runs, and pressure variation, supply reasoning is working knowledge, and the portion treats it that way.

Fuel gas piping

Oklahoma examines the gas side of the trade inside the same portion, through the International Fuel Gas Code alongside the plumbing code. Piping materials, sizing, and the safety provisions governing fuel gas work are tested as journeyman competence, in the edition the window assigns to the sitting. The preparation consequence deserves emphasis: a candidate who studies only the plumbing code has prepared for part of the portion. The IFGC layer is not an elective, and in a window where both codes exist in two editions, the gas material must be edition-matched just as carefully as the plumbing material.

Traps, interceptors, and indirect waste

This area examines the barriers. Trap seals keep the drainage system out of occupied space; interceptors keep what must not enter the sewer from entering it; indirect waste keeps drainage from ever touching the potable or food side of a building directly. Candidates must know which arrangements the code prohibits outright, which it requires, and how the requirements change with the fixture or occupancy described. Errors here are rarely arithmetic; they are recognition errors, cured by learning the code’s protective logic rather than memorising isolated provisions.

Fixtures and fixture fittings

Fixtures are examined as installed systems: the clearances around them, the supply and flushing provisions serving them, and the conditions the code attaches to each type. The area rewards candidates who picture the finished room — fixture, connections, and users held in mind at once — over candidates who recite fixture facts in the abstract.

Isometric analysis

Seven written items inside the portion examine drawing literacy directly. The candidate reads isometric drawings, traces runs through them, and reasons about the system the drawing represents — what connects to what, how it is vented, how it would be sized. Two clarifications matter. First, this is analysis, not production: no portion asks the candidate to draw, and preparation spent learning to produce drawings for an examiner is spent on a component that does not exist. Second, analysis is nonetheless a distinct skill from text comprehension, and it is practised distinctly: by reading drawings, tracing them aloud, and checking each traced run against the code’s requirements until the reading is fluent. Candidates who prepare only from paragraphs meet these 7 items — nearly a twelfth of the pass line’s arithmetic — as strangers.

Sizing and layout reasoning

Sizing items connect the portion’s knowledge to its judgement. Reading a described system, selecting sizes from the code’s tables and methods in the edition being sat, and checking the result against the building described is the skill the open-book format most rewards, because the tables are present in the room and the differentiator is the speed and accuracy with which they are used. In an edition window, sizing carries a further discipline: tables and methods must be taken from the sat edition, since an answer correct under the other edition’s figures is, for that sitting, simply wrong.

The edition window in depth

No fact in this guide repays slow reading more than the open edition window, because it operates at three levels at once. At the examination level, the position is that unlimited trade examinations in Oklahoma currently test on IPC and IFGC 2018 or 2024, transitioning to 2024 only. At the adoption level, the position is settled and dated: Oklahoma’s adopted code is the IPC 2024, effective September 14, 2026 — the state builds to 2024. At the transition level, the position is deliberately imprecise in the sources themselves: the window is closing around December 2026 and January 2027, and the exact date the 2018 edition retires is contested between PSI documents.

The candidate’s working rules follow. First, the appointment governs. The edition position of the candidate’s own sitting — obtained from PSI for that appointment — outranks every general statement, including this guide’s. Second, preparation is single-edition. Study materials, tabbing, sizing practice, and timed work are all built in the sat edition; holding both editions open on the desk at once manufactures the confusion the window already makes possible. Third, field awareness runs the other way. Nothing in a 2018 sitting licenses installing to a superseded text: the adopted IPC 2024 governs the work, whatever edition the examination was sat in. The Oklahoma journeyman in the present period therefore lives, briefly and explicitly, in two editions — one for the room, one for the job — and the professionalism of the period consists of never confusing them.

Why would a state run such a window at all? Edition transitions strand candidates mid-preparation if the tested text changes overnight; a window lets preparation already invested in the earlier edition be honoured while the system moves to the adopted text. The cost of that fairness is the burden this section describes: for the window’s duration, edition discipline is part of the examination, whether or not any single item names it.

The sitting itself

The sitting is administered by PSI: one trade portion, 85 questions, 180 minutes, open book, $92 per portion. Open book deserves precise understanding, because candidates misread it in both directions. It does not mean the portion is easy; it means the portion tests retrieval and application rather than recall, and sets its pace accordingly — 180 minutes across 85 questions is time to find and apply provisions, not time to learn them. The candidate who opens the code in the room to a provision never seen before has already lost the exchange; the candidate who has organised the sat edition, knows its structure cold, and can land on a table inside a minute converts the format into an advantage. Preparation for an open-book sitting is therefore navigational: tab the sat edition of both codes, learn their chapter logic, and practise the find-apply-check loop until it is unhurried.

The pass line repays the same precision. The trade standard is published in two forms that describe one line: 70 percent, and 60 of 85 questions. The count form is the more usable one in the room: 25 questions may be missed and the line still reached, while the 26th miss ends the matter, and pacing becomes arithmetic rather than hope. There is no second sitting across which to recover — no practical, no further portion for this credential. The trade portion is the examination, whole.

A study plan built on how this examination is actually put together

Sequence the work by the portion’s real structure. First, the edition decision, made and recorded — which editions of the IPC and IFGC govern the appointment — because every later choice inherits from it. Second, the sat editions as navigable books: their organisation, sizing methods, and tables, practised open-book and timed from early on, because that is the sitting’s actual skill. Third, the fuel gas layer in its own sessions, edition-matched to the plumbing work, so the IFGC never becomes the portion’s neglected half. Fourth, isometric reading as a distinct strand: regular drawing-tracing practice, scored separately, until the 7 analysis items feel like a familiar dialect rather than a foreign one. Fifth, the Oklahoma delta: the contractor-only fence around Business and Law, the fee structure, the 6-hours-per-36-months cycle, the Arkansas-only reciprocity position, and the window’s contested closing — the short list of state positions that generic IPC material reliably gets wrong. Sixth, mixed timed practice across plumbing, gas, and isometrics together, scored against the 60-of-85 line rather than against a percentage alone, because the sitting examines the journeyman whole and reports against that count.

The working method: turning the outline into a performance

There is a difference between having read the codes and being able to perform them, and the method below exists to close that gap. Perform under sitting conditions early. From the second week onward, practice happens timed, with the sat editions open and nothing else open, uninterrupted; the point is not stamina but calibration — learning the felt pace at which careful find-and-apply work clears 85 questions inside 180 minutes with margin. Sort every error by kind. Misses divide into four families: provisions not yet learned, provisions found too slowly, tables read correctly but applied to the wrong configuration, and answers taken from the wrong edition — the family this state’s window adds to the usual list. Each family has a different cure, and study time spent on the wrong cure is wasted twice; the wrong-edition family, in particular, is cured at the desk, by single-edition discipline, and never in the room. Rotate the registers. Plumbing code, fuel gas code, and isometric reading are alternated inside single sessions rather than blocked into separate weeks, because the real portion alternates them and the mental switch is itself a skill. Revisit on a lengthening interval. Material answered correctly returns after days, then weeks; material missed returns the next day. Score against the count. Every full practice is reported as a count of 85 and read against 60, so the pass line the candidate rehearses is the pass line the state applies.

The errors this examination is built to catch

Oklahoma’s portion is built to catch structure errors. Preparing for a master tier that does not exist spends a season on the wrong credential. Studying Business and Law spends journeyman hours on a contractor-only portion. Blurring the editions — answering from 2024 habit in a 2018 sitting, or the reverse — fails items the candidate otherwise knows, and is the window’s signature error. Trusting a printed retirement date from any secondary source builds a plan on a fact the primary sources state inconsistently; the record is contested, and plans near the turn of the year must be confirmed with PSI. Treating open book as a substitute for fluency fails on pace: 85 questions in 180 minutes punish slow retrieval as surely as wrong knowledge. Skipping the isometric strand abandons 7 items to chance inside a portion where 25 misses is the whole allowance. And assuming reciprocity from any state but Arkansas misreads a position Oklahoma states with unusual clarity: one state is named, under an agreement effective October 21, 2024, and no other is.

Oklahoma in one view

Oklahoma in one view is a single portion carrying a whole credential, sat during a brief period when the examination’s editions and the state’s adopted code are deliberately out of step. The Journeyman Plumber licence stands with no master class above it; the route to it asks for one written performance — 85 questions, three hours, open book, 60 correct — with no bench sitting and no drawing exercise across which to spread the risk. Around that centre sit the state’s signatures: a five-portion examination system in which the journeyman takes one portion and the contractor’s Business and Law stays fenced off; an edition window that honours preparation invested in the 2018 IPC and IFGC while the adopted IPC 2024, effective September 14, 2026, already governs the work; a closing date for that window that the sources themselves leave contested; and a reciprocity position that names exactly one state. The journeyman Oklahoma licenses works the full plains range — metropolitan construction, rural systems, storm and freeze exposure — and the portion examines for exactly the failures that range punishes: systems sized by guess, protection duties missed, gas work treated as an afterthought, drawings read carelessly. The candidate who decides the edition question first, trains retrieval pace honestly, and gives isometrics and fuel gas their own deliberate hours will find the portion demanding in the way a trade standard should be — and passable in the way a well-prepared tradesperson should expect.

After the sitting: the credential and its clock

On passing, the licence issues on the $50 issuance fee, completing the $75 the state charges across application and issuance. Renewal runs at $75, with a $25 late fee where the renewal runs late, and the credential is maintained with 6 hours of continuing education per 36 months — a cycle so light that its only trap is being forgotten entirely, which the holder who clears the hours in the first year avoids at trivial cost. The licence’s working duties run continuously beneath the cycle: work performed to the adopted code, the IPC 2024, whatever edition the holder’s own sitting was referenced to.

Frequently asked questions

What credential does an Oklahoma journeyman plumber hold?

The Journeyman Plumber licence, certifying the individual plumber for journeyman work in Oklahoma.

Is there a master plumber class in Oklahoma?

No. No master class exists in Oklahoma. The journeyman licence does not sit beneath a master tier of the kind other states offer.

Who administers the trade examination?

PSI administers the sitting. PSI administers; the state licenses.

What are the trade portion’s verified mechanics?

85 questions in 180 minutes, open book, at $92 per portion. The trade passing standard is 70 percent — 60 of 85 questions.

Is there a practical examination or a drawing test?

No. No portion of the Oklahoma licensing examinations carries a practical or drawing-production component. Isometric Analysis appears inside the trade portion as 7 written items, examining drawing reading rather than drawing production.

Which code editions can the trade portion be sat in?

Inside the currently open window, unlimited trade examinations test on the 2018 or the 2024 IPC and IFGC, transitioning to 2024 only. Oklahoma’s adopted code is the IPC 2024, effective September 14, 2026.

What is the exact date the 2018 edition stops being tested?

This guide states none, because the date is contested between PSI documents. The window is closing around December 2026 and January 2027. Candidates with sittings in that period should confirm the edition position for their own appointment through PSI directly.

Do journeyman candidates sit the Business and Law portion?

No. Five portions exist across the licensing examinations, and Business and Law is for contractors only. The journeyman route is the trade portion.

What are the state fees for the journeyman licence?

An application fee of $25 and an issuance fee of $50 — $75 in total. Renewal is $75, plus a $25 late fee where the renewal runs late. The PSI portion fee of $92 is separate from the state fees.

What continuing education does the licence require?

6 hours per 36 months.

Which states does Oklahoma recognise for reciprocity?

Arkansas only, under an agreement effective October 21, 2024. No other state is named, and plumbers licensed elsewhere should expect the examination route.

Does passing require 70 percent, or 60 questions?

Both statements describe the same line: 70 percent of the 85-question trade portion is 60 questions. A candidate may miss 25 questions and reach the line; the 26th miss falls below it.

Is PassProfessor affiliated with the state or with PSI?

No. PassProfessor is an independent preparation provider. The state alone licenses journeyman plumbers, and examinations are administered through PSI.

When does enrollment open for the PassProfessor program?

The program is in the works and enrollment is not yet open. Leave an email address on this page and PassProfessor will write to you when the program is ready — and only about this program.