New Mexico MM-1 Plumbing Exam Guide: The Qualifying Party, Two PSI Examinations, and a Tested Code That Is No Longer the Adopted Code

New Mexico has no master-tier plumbing credential in its law. Its top plumbing tier is the MM-1 Plumbing contractor classification: a license issued only to a business entity, earned through a Qualifying Party who proves four years (8,000 hours) of experience in the classification and passes two PSI examinations — the 100-question MM-1 trade examination, tested on the 2021 Uniform Plumbing Code, and the 50-question Business and Law examination — at 75% on every examination. The adopted code is now the 2024 New Mexico Plumbing Code, effective August 1, 2026, so the tested edition and the adopted edition differ, and this guide keeps them apart throughout.

This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.

The credential at a glance

ItemVerified position
ProgramNew Mexico MM-1 Plumbing contractor classification, earned through its Qualifying Party
RegulatorConstruction Industries Division (CID) of the Regulation and Licensing Department, under the policy direction of the Construction Industries Commission (nine voting members), through its mechanical bureau
Governing lawConstruction Industries Licensing Act, NMSA 1978 §§ 60-13-1 to 60-13-59; rules at 14.6.3, 14.6.4, 14.6.6 NMAC and the New Mexico Plumbing Code at 14.8.2 NMAC
AdministratorPSI — CID has contracted with PSI to conduct its examination approval process and examination testing; CID preapproval is required
Trade examinationMM-1 Plumbing: 100 questions / 250 minutes / open book, computer-delivered at PSI centers, score on screen immediately
Business and Law50 questions / 130 minutes / open book; required of all new candidates (an approved course may be taken in lieu)
Passing standard75% on every examination
Tested codeUniform Plumbing Code, 2021, with the New Mexico Plumbing Code layer as listed
Adopted code2024 New Mexico Plumbing Code, effective August 1, 2026 — tested ≠ adopted
FeesPSI $68.88 per examination; licensing layer: $36 application total, $150 license fee for MM-1, $10,000 contractor code bond, three-year term
Practical componentNone at the MM-1 tier. The hands-on Practical belongs only to the JP journeyman tier, as ladder context
Administrator notePassProfessor is independent and is not affiliated with the Construction Industries Division

The companion program page is at /new-mexico-master-plumber-exam-prep/. This guide goes deeper: the three-part structure of New Mexico licensure, the full published outlines, the reference rules of the room, the retake regime, the journeyman ladder beneath the tier — including the hands-on Practical that belongs to that ladder alone — and the edition split that defines preparation for this examination right now.

Three things other states merge: license, Qualifying Party, journeyman

New Mexico’s system cannot be understood until its three instruments are separated, because the errors candidates make here are almost all merger errors.

The contractor license is issued only to a business entity. A person cannot hold an MM-1 license as an individual, however experienced that person is. The Qualifying Party certificate is held by an individual — the person who has the requisite experience, who takes and passes the required examinations, and who is responsible for the licensee’s compliance with the Act and rules. The Qualifying Party may act only while validly attached to a validly licensed entity, and may not qualify more than one licensed entity, other than a joint venture, absent at least 30 percent common ownership. The journeyman certificate of competence is held by the individual who may physically perform the work, under a separate certification track with its own examinations.

There is no standalone plumbers’ board in this structure. The Construction Industries Division of the Regulation and Licensing Department administers the system under the policy direction of the Construction Industries Commission, operating through its mechanical bureau, under the Construction Industries Licensing Act and the rules at Title 14 NMAC — contractor license requirements at 14.6.3, journeyman certification at 14.6.4, classifications and scopes at 14.6.6, and the New Mexico Plumbing Code at 14.8.2. And there is no credential in that structure bearing a master title of any kind: the phrase appears nowhere in the Act or the rules as read. Secondary material that offers preparation for a New Mexico examination under a master name is preparing candidates for a credential that does not exist; the examination that does exist at the top tier is the MM-1 Qualifying Party track this guide describes.

The route, step by step

Step one — build the experience record. Four years, 8,000 hours, in the MM-1 classification, within the ten years immediately before application, documented to the division before sitting. Accredited technical training counts at one-half year per year of training, capped at one-half of the total requirement — two years of the four at most. Step two — obtain CID preapproval. Examination approval runs through PSI under CID’s contract, but eligibility is the division’s: the candidate must test within six months of eligibility. Step three — pass both requirements within one year of each other: the MM-1 trade examination and the Business and Law requirement, the latter satisfied either by its examination or by an approved Business and Law course taken in lieu of it. Passing scores are valid for one year. Step four — license the entity: the application total of $36, the $150 license fee for the MM-1 classification, and the $10,000 contractor code bond, for a three-year term expiring the last day of the issuance month. Every license must have at least one Qualifying Party for each classification of work it covers, continuously — the Qualifying Party is not a hurdle cleared once but a standing condition of the license.

Tested 2021, adopted 2024: the edition split in full

This is the single most consequential fact in current New Mexico preparation, so it is worth stating with both layers dated.

Tested. The MM-1 trade examination is based on the Uniform Plumbing Code, 2021, together with the New Mexico Plumbing Code as listed in the bulletin references, the Uniform Mechanical Code, 2021, and the examination’s other listed references. The bulletin rule is printed in every reference list: for code questions, the examinations will be based only on the edition of the code book that is listed. Where the New Mexico Plumbing Code and the bare Uniform Plumbing Code conflict, the state-specific code overrides the national one — candidates are examined on the New Mexico position, not the model position, wherever the two diverge.

Adopted. The 2024 New Mexico Plumbing Code at 14.8.2 NMAC adopts by reference the 2024 Uniform Plumbing Code and all appendices as amended by the rule, effective August 1, 2026. Permits may issue under either the 2021 or the 2024 code until January 1, 2027; after that date, only under the 2024 code. The edition it replaced, the 2021 New Mexico Plumbing Code, ran from March 10, 2022 to July 31, 2026.

No primary source announces an examination move to the 2024 edition or any examination transition date, and this guide states none. The working rule until the bulletins themselves change is the one the bulletins print: the listed edition — 2021 — is the examined edition. Candidates should also distrust any bulletin line that appears to date the New Mexico Plumbing Code reference to a much older year: such a line is a stale printing in the bulletin, not the operative position, and the INTERNAL record of this package notes it as barred. Preparation keyed to the 2024 code, however current it feels, is preparation for the permit counter, not for this sitting.

The MM-1 trade examination, area by area

The trade examination is 100 questions in 250 minutes, open book, delivered by computer at PSI examination centers, with the score given immediately on screen — 75% required to pass. Its published outline is:

Drainage, Waste and Vents — 25 questions. One question in four. Sizing, venting, drainage design and the code rules beneath them dominate this sitting, and a preparation plan that spreads time evenly across the outline misreads the examination’s own weighting.

General Knowledge and General Regulations — 15 questions. The code’s general provisions and the regulatory framework of the classification: administration, definitions, general requirements, and the rules that apply before any system-specific chapter is reached.

Plumbing Fixtures, including Water Heaters and Accessibility — 10 questions. Fixture requirements, water heater installation, and the accessibility provisions grouped with them in the outline.

Water Supply Systems — 10 questions. Supply sizing, distribution, protection of the potable system, and the materials and joining rules that govern it.

Isometric Analysis — 10 questions. Written analysis of isometric drawings inside the examination. This area is analysis, not production: candidates read and reason from drawings; they do not draw, and they do not build. It is the nearest thing to a drawing component at this tier, and it is entirely written.

Backflow Prevention — 9 questions. Devices, assemblies, installation positions and the protection duties that follow from them.

Interceptors and Traps — 9 questions. Trap requirements and interceptor sizing, siting and maintenance ground.

Storm Drainage Systems — 6 questions. Roof and site storm drainage and its sizing rules.

Septic and Sewer — 6 questions. Building sewers and the septic interface, alongside the New Mexico liquid waste layer in the reference list.

The room rules. The examination is open book in a specific, disciplined sense. Candidates bring their own bound references, which may be highlighted, underlined and indexed before the session only; references may not be written in, before or during the session; tabs must be permanent; and a silent, non-printing, non-programmable calculator is permitted. The allowed reference list for MM-1 includes the 2021 Uniform Plumbing Code, the New Mexico Plumbing Code (14.8.2 NMAC) as listed, the 2021 Uniform Mechanical Code, IPT’s Pipe Trades Handbook (2016), the New Mexico Mechanical Code (14.9.2 NMAC) as listed, the New Mexico Liquid Waste Disposal Regulations (20.7.3 NMAC), and NFPA 30A (2015 or earlier). Two books candidates often assume are universal are expressly not allowed for this examination: Mathematics for Plumbers and Pipefitters and OSHA 29 CFR Part 1926. That exclusion is examination-specific to MM-1 and must not be generalised to other New Mexico examinations, which carry their own lists.

The Business and Law examination

Every new candidate must satisfy the Business and Law requirement. The examination form is 50 questions in 130 minutes, open book, at the same 75% standard; an approved Business and Law course may be taken in lieu of the examination. Either way, the trade examination and the Business and Law requirement must be satisfied within one year of each other — a passed trade examination does not wait indefinitely for its commercial counterpart.

Its outline is: Licensing Requirements — 8; Business Organization and Financial Management — 8; Contracts — 8; Estimating and Bidding — 5; Tax Laws — 5; Project Management and Lien Law — 5; Labor Laws — 4; Risk Management — 4; Environmental and Safety — 3. The shape is deliberate: the heaviest weight sits on licensing itself, on how the business is organised and financed, and on contracts — the three areas where a Qualifying Party’s decisions bind the licensed entity. This is not a generic business quiz appended to a trade paper; it examines the commercial responsibilities that the Qualifying Party certificate exists to certify, and it should be prepared for as a second examination, not an afterthought scheduled in the same week as the trade paper by default.

The passing standard and the retake regime

The passing standard is 75% on every examination — the figure appears in the bulletin headlines for both examinations, in the rule for the Qualifying Party track (“a passing exam score is seventy-five percent or higher”), and in CID’s own published statement that applicants must pass with a minimum score of 75%. Three layers agree, and the figure is stated in this guide in that agreed form.

The retake regime is a frequency rule rather than a lifetime cap. A candidate may not take the same examination more than twice within a 30-day period; a candidate with two fails within a 30-day period must wait 30 days from the first attempt before testing again. The rule layer adds that a failed or no-show applicant may take another regularly scheduled examination provided the applicant reapplies and pays the fee — each attempt is a fresh $68.88 vendor fee. Cancellation or rescheduling without forfeiting the fee requires notice received two days before the scheduled date, and voicemail or email is not acceptable cancellation. One hard line runs beneath the regime: cheating voids the examination and any credential issued on it, forfeits all fees, and bars the applicant from any CID examination for one year.

The journeyman ladder beneath MM-1 — and its Practical

The JP journeyman certificate is ladder context for this program, stated here in full because Qualifying Parties supervise and employ within a system whose working tier it defines — and because its most distinctive component is routinely misattributed to the MM-1 tier.

JP requires two years of experience (4,000 hours) within the prior ten years and age 18 or older, and two examinations. The JP Written is 70 questions in 185 minutes, open book, at the same 75% standard. The JP Practical is a separate hands-on examination — 100 points in 120 minutes, at 75% — built from seven hands-on projects: a copper and PEX water piping assembly, a tub assembly, a washer box assembly, fitting identification, tool identification, an island vent assembly, and a drainage pipe project.

That Practical belongs only to the journeyman tier. The MM-1 Qualifying Party track has no practical examination, no hands-on component, and no drawing-production component; a written program can cover the documented MM-1 format completely. The two tracks must never be merged: a candidate who prepares for a hands-on practical as part of MM-1 is preparing for an examination this tier does not contain, and a candidate who assumes the journeyman tier is written-only will arrive at the JP Practical unprepared. Journeyman renewal also carries a continuing education requirement — 16 hours of approved coursework before renewal or reinstatement, at least eight of them covering the current CID code — which is stated here as a journeyman-tier rule. This guide makes no corresponding statement about contractor or Qualifying Party continuing education in either direction.

Two verified negatives complete the ladder picture: New Mexico has no apprentice registration or certificate, and no standalone backflow-tester credential. And no reciprocity enters the route at either tier: no plumbing journeyman reciprocity and no contractor-license reciprocity appears in any primary source read, and no state is named for either in this guide.

Scope: what MM-1 covers, and where it stops

The MM-1 classification’s scope at 14.6.6.11 B(1) NMAC authorizes the licensee to install, alter, repair, service and maintain plumbing, plumbing fixtures and piping, including incidental concrete supports and excavating, trenching and backfilling; hot water heating systems not exceeding 30 p.s.i. or 400,000 b.t.u. per hour input; piping for fuel, oil and gasoline; solar thermal piping and appurtenances; potable water irrigation sprinkler systems; swimming pools and spas; pneumatic and electric controls and control wiring not greater than 24 volts; and septic tanks, manholes and sewer lines.

The boundary is as important as the list: MM-1 does not include installation of natural gas fired appliances or natural gas piping. Natural gas fitting is MM-2. Around MM-1 sit MM-3 HVAC and MM-4 Heating, Cooling and Process Piping — each sibling classification with its own four-year experience requirement and its own trade examination — and the umbrella MM-98 Mechanical classification, which spans the MM classifications together with specified specialty classifications (MS-3 and MS-6 at two years, MS-12 and MS-14 at four). No examination pathway for the umbrella classification is stated in the primary record, and this guide states none: each classification is qualified through its own Qualifying Party and its own published route, and scope must never be read as an examination shortcut.

The money layer in full

Examination layer. PSI charges $68.88 per examination — first attempt or retake — not refundable or transferable, with the fee valid for one year from PSI’s receipt. The Qualifying Party track’s two examinations therefore total $137.76 at the vendor layer.

Licensing layer. The contractor-license and Qualifying Party-certificate application total is $36, reconciled as a $30 application fee plus a $6 certificate-of-qualification fee. The license fee is $150 per MM-1 classification — and $300 for the MM-98 classification, with a maximum of $300 for multiple classifications within any one category. The contractor code bond is $10,000. Late renewal is $1 per day for the first 30 days; the position beyond 30 days is not stated in this guide, because the statute layer and the form layer conflict on it. The term is three years, expiring the last day of the issuance month. For ladder context, the journeyman certificate fee is $75 per classification.

A study plan built on the published outlines

New Mexico publishes what many states do not — full outlines with weights — and the plan should honour them. First, drainage, waste and vents at full weight: a quarter of the trade paper, worked on the 2021 Uniform Plumbing Code with the New Mexico overrides learned in place. Second, the general layer: general knowledge and regulations, the code’s administrative framework, and the classification rules at 14.6.6 that define what the license being qualified actually covers. Third, the systems in outline order: fixtures and water heaters, water supply, backflow, interceptors and traps, storm drainage, septic and sewer — with isometric analysis practised as a reading skill throughout, since ten questions reward fluency rather than last-week cramming. Fourth, Business and Law as a separate campaign, scheduled on its own merits inside the one-year pairing window, weighted toward licensing, business organization and contracts. Fifth, the room itself: references prepared lawfully — bound, highlighted and indexed in advance, permanently tabbed, nothing written in — and the two expressly excluded books left at home. Sixth, mixed timed practice under the real clocks, 250 minutes and 130 minutes, because both papers are long enough that pacing is a skill in its own right.

The errors this examination is built to catch

Studying the adopted code instead of the tested code is the defining current error: the 2024 New Mexico Plumbing Code governs permits, and the 2021 Uniform Plumbing Code governs this sitting. Merging the tiers — treating the Qualifying Party certificate as a personal license, or the entity’s license as the individual’s — misreads every rule that follows. Importing the journeyman Practical into MM-1 wastes preparation on a component this tier does not contain, just as assuming the JP tier is written-only strands a journeyman candidate. Treating Business and Law as an appendix ignores a full second examination with its own outline, its own clock, and a one-year pairing deadline. Bringing the wrong books — including the two titles expressly excluded for MM-1 — turns an open-book sitting into a closed one. Letting the six-month eligibility window or the one-year score validity lapse converts passed or approved progress back into paperwork. And searching for a credential under a master name sends the candidate to secondary material for a license New Mexico does not issue, instead of to the MM-1 classification it does.

New Mexico in one view

New Mexico in one view is a state that separates its instruments and dates its editions. The license belongs to an entity; the examinations belong to a Qualifying Party; the work belongs to certificated journeymen. MM-1 is qualified on four documented years, two published examinations at 75%, and a tested code — the 2021 Uniform Plumbing Code — that the state has already superseded for permits with its 2024 code. The outlines are published with weights, the reference lists name what may and may not enter the room, the fees divide cleanly between vendor and division, and the one component a written program cannot rehearse — the hands-on Practical — sits plainly labelled at the journeyman tier, where it belongs, and nowhere else.

Frequently asked questions

What is the highest plumbing credential in New Mexico?

The MM-1 Plumbing contractor classification — a license issued to a business entity and earned through its Qualifying Party. New Mexico law contains no master-tier plumbing license, certificate, or examination of any kind.

Who is the Qualifying Party?

The individual with the requisite experience who takes and passes the required examinations and is responsible for the licensee’s compliance. Every license must have at least one Qualifying Party for each classification it covers, and a Qualifying Party may act only while validly attached to a validly licensed entity.

What examinations does the MM-1 route require?

The MM-1 Plumbing trade examination — 100 questions, 250 minutes, open book — and the Business and Law requirement, satisfied by its 50-question, 130-minute, open-book examination or by an approved Business and Law course taken in lieu of it. The two must be satisfied within one year of each other.

What score passes?

75% on every examination — stated identically in the bulletins, in the Qualifying Party rule, and in CID’s own published position.

Which code is tested, and which code is adopted?

Tested: the Uniform Plumbing Code, 2021, with the New Mexico Plumbing Code layer as listed; where the state code and the bare model code conflict, the state code overrides. Adopted: the 2024 New Mexico Plumbing Code, effective August 1, 2026, with permits allowed under either code until January 1, 2027. No examination transition date to the 2024 edition is published.

Is there a hands-on examination for MM-1?

No. MM-1 has no practical, no hands-on component, and no drawing-production component; Isometric Analysis is ten written questions inside the trade examination. The hands-on Practical — seven projects, 100 points, 120 minutes — belongs only to the JP journeyman tier.

What experience must a Qualifying Party prove?

Four years (8,000 hours) in the classification within the ten years immediately before application, documented to CID before sitting. Accredited technical training counts at half credit, capped at half the requirement. The Qualifying Party must be 18 or older and may not qualify more than one licensed entity, other than a joint venture, absent at least 30 percent common ownership.

What happens after a failed attempt?

A candidate may not take the same examination more than twice within a 30-day period; after two fails inside 30 days, the candidate waits 30 days from the first attempt before testing again. Each attempt requires reapplication and a fresh $68.88 fee.

What does MM-1 not cover?

Natural gas. MM-1 excludes installation of natural gas fired appliances and natural gas piping; natural gas fitting is the separate MM-2 classification.

What does the route cost?

$68.88 per examination to PSI ($137.76 for the two examinations), a $36 application total, a $150 license fee for the MM-1 classification, and a $10,000 contractor code bond. The term is three years. The journeyman certificate fee, for ladder context, is $75 per classification.

Does New Mexico offer reciprocity for plumbing credentials?

No plumbing journeyman reciprocity and no contractor-license reciprocity appears in any primary source read, and no state is named for either. Candidates should not plan a route around recognition that the record does not contain.

Is PassProfessor affiliated with CID or PSI?

No. PassProfessor is an independent preparation provider. The Construction Industries Division alone licenses contractors and certifies Qualifying Parties, and PSI administers the examinations under CID’s contract.

When does enrollment open for the PassProfessor program?

The program is in the works and enrollment is not yet open. Leave an email address on this page and PassProfessor will write to you when the program is ready — and only about this program.