New Hampshire Journeyman Plumber Exam Guide: The Credential, the Prov Examination, and the Route Between Them

New Hampshire licenses its Journeyman Plumber through the Mechanical Licensing Board, with examinations delivered by Prov: 85 questions in 180 minutes, open book, passed at 70 percent — on the International Plumbing Code 2018, even though the state has adopted the International Plumbing Code 2024. The PassProfessor New Hampshire Journeyman Plumber program prepares candidates for the examination as it is actually tested, and for holding the license that follows it.

This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.

The credential at a glance

ItemVerified position
ProgramNew Hampshire Journeyman Plumber
AuthorityMechanical Licensing Board, within the Office of Professional Licensure and Certification (OPLC)
VendorProv — single-part computer-based test
Code testedInternational Plumbing Code 2018 — 85 questions / 180 minutes / 70 percent to pass / OPEN BOOK / examination fee $90
Code adoptedInternational Plumbing Code 2024, effective July 1, 2026 — adopted edition differs from tested edition; candidates are examined on 2018
Approval and scoringBoard pre-approval is required before scheduling; scoring is immediate
Practical / drawingNone — no practical or drawing component
RetakeNo waiting period before a retake
Fees (state and examination fees)Examination $90; Journeyman Plumber license $198 (rule layer, Plc 1002.25)
Term and educationLicense term 2 years from issuance; continuing education of 6 hours per 2-year cycle is required
ReciprocityNo state is named for reciprocity — none is stated
Administrator notePassProfessor is independent and is not affiliated with the Mechanical Licensing Board or the Office of Professional Licensure and Certification

New Hampshire’s guide turns on a single distinction, and this opening states it without qualification: the state has adopted the International Plumbing Code 2024, effective July 1, 2026, and the Journeyman Plumber examination is tested on the International Plumbing Code 2018. Everything else about the credential is comparatively straightforward — one Board, one vendor, one sitting, one passing standard — but that one distinction decides which book to buy, which book to tab, which provisions to memorise and which answers the Prov computer will credit. This guide therefore returns to the distinction at each stage: in the route, in the code discussion, in the study plan and in the catalogue of errors, because an edition error is not one mistake among many in New Hampshire; it is a systematic error that touches every question. The companion program page is the New Hampshire Journeyman Plumber Exam Preparation page.

Reading the verified facts

The verified record for this credential is unusually complete, and the guide uses it fully: authority, vendor, tested edition, question count, duration, passing standard, book status, examination fee, approval requirement, scoring timing, retake position, practical absence, license fee and its rule citation, term, continuing education hours and cycle, and the reciprocity position are all established from primary sources. Two disciplines follow. First, where the record is explicit, the guide is explicit — figures are stated once, in their verified form, and repeated identically wherever they recur, because candidates plan around them. Second, where the record is silent, the guide stays silent: no per-area blueprint weights, no eligibility hour figures and no additional fees are printed, because none are in the verified record for this credential. Candidates should measure secondary sources against that standard. A source that adds confident detail beyond the Board’s and Prov’s own figures is not better informed; it is less disciplined, and in a state with a live edition trap, undisciplined sources are how candidates come to study the wrong book with great thoroughness.

One correction belongs in this section because it concerns a verified negative that circulates as its opposite. It is sometimes said that New Hampshire imposes no continuing education on its plumbers. The verified position is that continuing education is required — 6 hours per 2-year cycle — and this guide states the requirement wherever renewal is discussed. Candidates who encounter the contrary claim should treat it as the kind of error this section exists to intercept.

The route, step by step

Step one — settle the edition before anything else. The study text is the International Plumbing Code 2018. Candidates whose employers, suppliers or local practice have moved to the adopted 2024 code should acquire and organise a 2018 study copy specifically for the examination, and should expect to notice differences between the two editions throughout preparation; noticing them, and filing each one on the correct side of the line, is the core skill of this route. Step two — obtain Board pre-approval. Approval by the Mechanical Licensing Board is required before scheduling. Because the gate sits before the Prov booking, its timing controls the whole calendar: apply with the preparation already well advanced, so that approval arrives into a short final window rather than starting the clock on months of study the candidate has not yet done. Step three — schedule and sit with Prov. The examination fee is $90. The sitting is a single-part computer-based test of 85 questions in 180 minutes, open book, on the 2018 code. Step four — receive the result at the sitting. Scoring is immediate; the passing standard is 70 percent, and the candidate leaves knowing whether the route continues to licensure or to a retake. Step five — license and hold. On passing, the Journeyman Plumber license fee is $198 under Plc 1002.25, and the term runs 2 years from issuance. Holding the license means working under the adopted code in practice, renewing on the two-year term, and completing 6 hours of continuing education per 2-year cycle. If step four ends below the standard, there is no waiting period before a retake — the route loops back to step three without a mandated delay, at a further $90 examination fee per sitting.

The two codes in depth: what adoption means and what testing means

Adoption and testing answer different questions, and New Hampshire is the clearest case in this catalog for learning to separate them. Adoption answers the question: what law governs a plumbing installation in this state? From July 1, 2026, the answer is the International Plumbing Code 2024. Inspectors inspect against it, contractors are held to it, and a journeyman’s daily work is judged by it. Testing answers a different question: against what standard does the Board, through Prov, measure a candidate? The verified answer is the International Plumbing Code 2018, in an 85-question, open-book, computer-based sitting passed at 70 percent. Neither answer displaces the other. The Board examines on the edition its examination was built and validated against, and examinations move editions on assessment timetables — after validation, item review and bulletin revision — rather than on the day an adoption takes effect.

The candidate’s obligations follow from keeping the answers separate. For the sitting, the 2018 text is supreme: its provisions, its tables and its wording decide credited answers, and where the 2024 edition states a rule differently, the difference is a distractor the examination may well be testing for. For practice after licensure, the adopted code governs, and the newly licensed journeyman who learned only the tested edition owes the adopted edition a deliberate study pass — not for an examination, but because the work itself demands it. Candidates sometimes ask which edition matters more. The honest answer is sequential: 2018 decides whether the license is earned; 2024 decides whether the work done under it complies. Confusing the sequence in either direction is costly — studying 2024 for the sitting risks the license, and working to 2018 after licensure risks the installation.

A further practical point follows for study materials. Generic International Plumbing Code preparation is now published predominantly against recent editions, and material keyed to the 2024 code will read as current, polished and authoritative while pointing at the wrong text for this sitting. Candidates should verify the edition of every resource they use — practice sets, code commentaries, sizing worksheets — against the tested edition before admitting it to the study plan. Edition-checking a resource takes a minute; unlearning a confidently practised provision from the wrong edition takes far longer.

The sitting in depth: 85 questions, 180 minutes, open book

The mechanics are fully verified and worth internalising as numbers: 85 questions, 180 minutes, 70 percent to pass, open book, $90, single part, computer-based, delivered by Prov after Board pre-approval, scored immediately, with no practical or drawing component and no waiting period before a retake if one is needed. Each element carries a preparation consequence, and this section takes them in turn.

Single-part delivery means there is no second paper to rescue a weak first one and no part-level standard to manage; the performance is one continuous three-hour exercise and should be rehearsed as one. Computer-based delivery means answers are committed on screen and the result is computed at once — candidates should be comfortable with on-screen question navigation, flagging and returning, so that the interface costs no time or attention on the day. Eighty-five questions in 180 minutes sets the arithmetic of the sitting: the average allowance is a little over two minutes per question, and the average is a budget to be managed, not a per-question rule. Provisions the candidate knows outright should be answered in well under the allowance, banking time for the sizing calculations and multi-step code applications that legitimately need four or five minutes. Candidates who rehearse only untimed accuracy arrive able to answer every question and unable to answer all of them; timed rehearsal at the full 85-question scale is therefore not an optional refinement but a core part of preparation for this credential.

Open book, in a three-hour sitting, is a tool with a specific job: verification and calculation support, not first resort. The mathematics are unforgiving — even a brisk two-minute lookup, applied to most questions, consumes the sitting — so the candidates who benefit from the book are those who need it least often. Organise the 2018 study copy for that pattern of use: a tabbing system built around the sections the examination draws on most heavily — drainage, vents, water supply, fixtures, general requirements — practised until retrieval is a single motion. Then rehearse with the organised book in timed sets, noting every lookup that took longer than it should have and fixing the book, the tab or the knowledge gap that caused it. Immediate scoring completes the picture: there is no anxious interval after the sitting, and candidates should plan the day accordingly — the result, and either the licensure step or the retake decision, arrives with the sitting itself.

What the questions examine: the journeyman’s working knowledge

No per-area blueprint weights are in the verified record, and this guide invents none. What can be described faithfully is the body of knowledge an 85-question International Plumbing Code journeyman examination at this level examines, organised as the code itself organises the trade. General requirements and definitions supply the sitting’s vocabulary and its administrative frame — the provisions that decide how every other chapter is read. Fixtures and installation examine the visible end of the work: what may be installed, where, and to what clearances and standards. Water supply and distribution examine sizing, pressure, protection of the potable system and the backflow principles that guard it. Drainage examines the sanitary system’s sizing, slopes, materials and cleanout logic. Vents examine the protection of trap seals and the venting methods the 2018 text permits. Traps, interceptors and separators examine the components that keep sewer gas and contaminants on the correct side of the system. Storm drainage and indirect waste complete the survey where the tested edition addresses them. Across all of it, sizing judgement is the examined skill that most separates the journeyman standard from the apprentice standard: not merely knowing that a table exists, but accumulating loads correctly, applying the tested edition’s tables accurately, and recognising an implausible result before committing to it.

For each area, the study discipline is the same two questions the sitting will ask in different forms: what does the 2018 text require here, and how is that requirement applied to the described installation? Candidates should be suspicious of preparation that stops at the first question. A multiple-choice sitting at journeyman level presents installations, not recitations — a described system with one element wrong, a described load to be sized, a described condition to be judged compliant or not — and the credited answer belongs to the candidate who has practised applying provisions to systems, in the tested edition, against the clock.

A study plan built on how this examination is actually put together

Sequence the work by the route’s own gates. First, the edition pass. Acquire the 2018 text, organise it, and build a personal register of differences noticed against the adopted 2024 code as they appear — each difference logged with its tested-edition position, because the register is the antidote to the examination’s most likely trap. Second, the code survey at knowledge standard. Work the tested edition area by area to the point where core provisions can be stated without the book; open book is the sitting’s condition, but knowledge is what makes three hours sufficient for 85 questions. Third, application and sizing. Shift the balance to described systems and calculations: sizing exercises from the 2018 tables, compliance judgements on described installations, and close reading of question stems for the single detail that changes the answer. Fourth, full-scale timed rehearsal. Complete 85-question sets inside 180 minutes with the organised book, repeatedly, reviewing every error and every slow lookup after each set, until rehearsal scores clear 70 percent with margin rather than hovering at it. Fifth, the approval gate, timed to the plan. Seek Board pre-approval so that it lands as rehearsal peaks — approval sought too early wastes its window in early study; approval sought too late strands a ready candidate waiting on process. Throughout, keep the two fees and the term in view — $90 to sit, $198 for the license, 2 years from issuance, 6 hours of education per cycle — because a candidate who can state the whole route cleanly understands the credential as a system, which is the level at which the Board administers it and, in substance, the level the examination examines.

The working method: turning the outline into a performance

There is a difference between having read the code and being able to perform it under Prov’s conditions, and the method below exists to close that gap. Sort every error by kind. Misses in this examination divide into four families: provisions not yet learned, edition errors — a 2024 position produced where the 2018 text governs — lookup failures, where the provision was findable but not found in time, and pace failures, where knowledge existed but the clock ran out first. Each family has a different cure, and the edition family is the one generic methods never diagnose: log it separately from the first practice set, because its cure — the difference register and edition-checked materials — is specific and highly effective once the pattern is visible. Rehearse the interface as well as the content. On-screen flagging, returning and reviewing should be automatic before the sitting, so attention stays on plumbing. Revisit on a lengthening interval. Material answered correctly returns after days, then weeks; sizing methods return as complete exercises, because method is verified only by performance. Protect the margin. A rehearsal pattern that clears the standard narrowly is not readiness; it is a coin toss with better branding. Readiness for this credential is a sustained rehearsal margin above 70 percent at full scale and full timing, with the edition register maintained — the point at which the immediate score at the sitting becomes a formality rather than a suspense.

The errors this examination is built to catch

New Hampshire’s sitting is built to catch a recognisable set of errors, and the first dwarfs the rest. Studying the adopted code for the tested sitting — preparing from the International Plumbing Code 2024 because it is in force — is the structural error of this credential; the examination is on the 2018 edition, and thorough preparation in the wrong edition is still preparation in the wrong edition. Treating open book as open season follows: the candidate who plans to look everything up has planned to run out of time somewhere in the second hour. Leaving pre-approval late converts a ready candidate into a waiting one, on a route where the Board’s gate, not Prov’s calendar, controls the schedule. Believing the no-education claim — the circulating statement that this license carries no continuing education — sets up a renewal failure two years after a successful sitting; the verified requirement is 6 hours per 2-year cycle. Assuming reciprocity on the strength of another state’s licence wastes the season it consumes; no state is named in the verified record. And pacing by the average — giving every question its two minutes regardless of difficulty — starves the sizing items that need five and wastes the straightforward items that need thirty seconds; the budget belongs to the sitting as a whole, and managing it is a rehearsed skill, not an improvisation.

After the sitting: the credential and its clock

Immediate scoring means the after-sitting chapter opens at once. Below 70 percent, the route is short and, by licensing standards, kind: no waiting period stands before a retake, a further $90 examination fee buys the next sitting after re-approval steps as the Board directs, and the preparation record — especially the error log, sorted by kind — tells the candidate exactly what the interval between sittings is for. Candidates should use that interval diagnostically rather than merely repetitively; a second sitting prepared identically to the first tends to reproduce the first sitting’s result with the names of the questions changed.

At or above 70 percent, licensure follows on the $198 license fee under Plc 1002.25, with the term running 2 years from issuance. Two obligations then define holding the credential. The first is edition-aware practice: the work is governed by the adopted code — the International Plumbing Code 2024, in force since July 1, 2026 — so the study direction reverses after licensure, and the difference register built during preparation becomes a practice tool rather than an examination tool. The second is the education cycle: 6 hours of continuing education per 2-year cycle, logged as earned, against a renewal that arrives on the issuance anniversary rather than on a statewide date the whole trade shares. Hold both, and the credential the Board issued remains what the examination certified — a journeyman whose code judgement the state has measured, tested deliberately on the edition the Board chose, and trusted to work under the edition the state adopted.

Frequently asked questions

Who licenses journeyman plumbers in New Hampshire, and who examines them?

The Mechanical Licensing Board, within the Office of Professional Licensure and Certification, licenses. Prov delivers the examination.

Which code edition is tested — 2018 or 2024?

The International Plumbing Code 2018 is tested. The International Plumbing Code 2024 is adopted, effective July 1, 2026, but adoption does not change the tested edition; candidates are examined on 2018.

How many questions are on the examination, and how much time is allowed?

85 questions in 180 minutes, in a single-part computer-based test.

Is the examination open book?

Yes. The sitting is open book — in the tested 2018 edition. Organisation and lookup speed still decide how much the book helps.

What score passes?

70 percent.

Must the Board approve a candidate before scheduling?

Yes. Board pre-approval is required before scheduling with Prov.

When is the result known?

Scoring is immediate; the candidate leaves the sitting knowing the result.

Is there a practical or drawing component?

No. There is no practical or drawing component; the examination is entirely the written computer-based test described in this guide.

What does the route cost in verified fees?

The examination fee is $90, and the Journeyman Plumber license fee is $198 under Plc 1002.25.

How long must a failed candidate wait to retake?

There is no waiting period before a retake.

How long does the license last?

The term is 2 years from issuance.

Is continuing education really required? Some sources say New Hampshire has none.

It is required: 6 hours per 2-year cycle. The claim that New Hampshire has no continuing education requirement for this license is incorrect, and licensees who rely on it risk renewal difficulty.

Does New Hampshire offer reciprocity from any named state?

No state is named in the verified record. Candidates licensed elsewhere should confirm their position with the Board directly rather than assume a transfer route.

Is PassProfessor affiliated with the Board or with Prov?

No. PassProfessor is an independent preparation provider, not affiliated with the Mechanical Licensing Board, the Office of Professional Licensure and Certification, or Prov. The Board alone approves and licenses.

When does enrollment open for the PassProfessor program?

The program is in the works and enrollment is not yet open. Leave an email address on the companion program page and PassProfessor will write to you when the program is ready — and only about this program.