Minnesota Master Plumber Exam Guide: The DLI Sitting in Points, the 2020 Minnesota Plumbing Code, and the Three Routes to Eligibility

Minnesota Master Plumber licensing is issued by the Commissioner of Labor and Industry, and the examination is given by the Minnesota Department of Labor and Industry itself — a state-run sitting with no third-party vendor. The master examination consists of 300 points in 5.5 hours, the passing score for all examinations is 70 percent, and all reference materials are provided by the department. This guide works through the credential in full for candidates preparing with the PassProfessor Minnesota Master Plumber program at /minnesota-master-plumber-exam-prep/.

This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.

The credential at a glance

ItemVerified position
ProgramMinnesota Master Plumber
RegulatorCommissioner of Labor and Industry; Minnesota Department of Labor and Industry (DLI). Minnesota Plumbing Board adopts the code and licensing/CE rules and recommends fees
Governing layersMinn. Stat. ch. 326B (§§326B.41–326B.49, §326B.092, §326B.093); Minn. Rules ch. 4716 (licensing) and ch. 4714 (code)
Examination administratorDLI (state-run). No third-party vendor
Examination format300 points / 5.5 hours. No question count is published, and none is stated in this guide
Passing score70 percent — “the passing score for all examinations is 70%”
Application and examination fee$50, separate from the license fee; nonrefundable
References in the roomProvided by DLI: 2020 Minnesota Plumbing Code, chapter 4714, a laws and rules booklet, and a calculator. Candidates do not supply their own materials
Tested code2020 Minnesota Plumbing Code (ch. 4714) — 2018 Uniform Plumbing Code with Minnesota amendments. Tested and adopted editions coincide
ApprovalDLI approval is required before scheduling. There are no exceptions; walk-ins are not permitted
Administrator notePassProfessor is independent and is not affiliated with the Minnesota Department of Labor and Industry or the Minnesota Plumbing Board

How to read this guide

Minnesota rewards candidates who read its published positions literally, and this guide is written to that standard. Three literal readings carry the whole credential. The examination is measured in points, not questions, and no conversion between the two is published. The references are provided by the department, not supplied by the candidate, and the guide’s own formulation of that regime is reproduced here rather than compressed into a label. Eligibility for the master examination is stated as three alternative routes, and an older, longer experience formulation found in superseded reproductions of the rule is not the current prerequisite.

Terminology follows Minnesota usage. The tier below master is the Journeyworker Plumber. Restricted master and restricted journeyworker licenses form a closed grandfather class with no examination and no further issuance as a route into the system; they appear in this guide only where a master eligibility route or the renewal rules mention the restricted master license that a candidate already holds. City competency-card examinations for Minneapolis and St. Paul are separate city credentials, outside the scope of this state program, and no mechanics for them are stated here.

The authority structure

Licenses are issued by the Commissioner of Labor and Industry, and the examination is given and administered by the commissioner. The Minnesota Plumbing Board adopts the Plumbing Code and the licensing and continuing education rules and recommends fees. The governing layers are Minnesota Statutes chapter 326B — in particular §§326B.41 to 326B.49 on plumbing licensure and §§326B.092 and 326B.093 on fees and related administration — together with Minnesota Rules chapter 4716 for licensing and chapter 4714 for the code.

Because one department approves, examines, provides the references, scores, and issues, the candidate’s entire route runs through DLI channels. There is no vendor bulletin to consult, no vendor scheduling account to open, and no vendor fee to pay. Scheduling takes place in DLI’s system after DLI approval, testing takes place at DLI’s St. Paul office on Tuesdays, Wednesdays, and Thursdays except in state-holiday weeks and at outstate sites as listed by DLI, and results are communicated by the department. Candidates accustomed to vendor-administered examinations in other states should reset that expectation completely: every question about approval, scheduling, the room, and the result is a DLI question.

Eligibility in full: the three master routes

A candidate qualifies for the Master Plumber examination through any one of three published routes.

Route one — licensed journeyworker experience. At least one year of practical plumbing experience as a licensed journeyworker plumber. This is the standard ladder step: the journeyworker license held, and a year of practical plumbing experience gained in that licensed capacity.

Route two — equivalent out-of-state master licensure. A current master plumber license from another state where the requirements are equivalent to Minnesota’s, as determined by the commissioner. Equivalence is the commissioner’s determination, not the applicant’s assessment, and candidates on this route should expect the determination to be made on the other state’s requirements as DLI evaluates them.

Route three — restricted master plus contracting experience. A current Minnesota restricted master plumber license and five years of verifiable experience in business as a plumbing contractor in Minnesota. Both elements are required on this route: the restricted license held currently, and the five years verifiable as business experience in Minnesota contracting.

No other master prerequisite is stated in the verified sources, and one frequently repeated figure is expressly not used here: reproductions stating a longer period of journeyworker experience as the master requirement reflect superseded rule text and do not state the route-one prerequisite as verified. Applications should be framed on the three routes above.

The journeyworker foundation beneath route one is itself experience-based. A journeyworker candidate qualifies as a registered apprentice or registered unlicensed plumber with at least four years of recorded practical experience — one year counted as at least 1,750 hours, and, for the registered-unlicensed route, 2,000 hours in water distribution, 2,000 hours in DWV, and 1,000 hours in fixture work — or through the restricted-license route, or through a qualifying out-of-state license. The minimum age to perform plumbing work and to be licensed or registered is 18.

Approval precedes everything else in the sitting mechanics. DLI approval is required before scheduling, the published position allows no exceptions, and walk-ins are not permitted. Once approved, a qualified applicant may schedule within one year after the approval notification date, with one reschedule only inside that year. Candidates should plan preparation backward from that window: the year runs from approval, and the single reschedule is a limited resource to be held for genuine need.

The code in depth: chapter 4714 and the Minnesota amendments

The tested code and the adopted code coincide in Minnesota, and the full statement of the edition is the study syllabus in miniature. The examination is based on the 2020 Minnesota Plumbing Code, Minnesota Rules chapter 4714. The DLI License Examination Information Guide, April 2022, states that basis and adds that the edition used is the edition adopted as part of the state building code at the time the examination is administered — the most current adopted edition at the time the examination is administered.

The adopted code is the same 2020 Minnesota Plumbing Code, chapter 4714, effective December 17, 2021. Under Minn. R. 4714.0050, it incorporates by reference the 2018 edition of the Uniform Plumbing Code — UPC chapters 2–11, 16, and 17 and appendices A, B, and I — as qualified by chapter 1300 and amended in chapter 4714. It replaced the 2015 Minnesota Plumbing Code, which had rested on an earlier UPC edition and no longer states the tested law.

Four study consequences follow. First, the Minnesota amendments are tested material, not local color: wherever chapter 4714 amends the incorporated UPC text, the amended text is the examination’s text. Second, the incorporated scope is defined: candidates should know which UPC chapters and appendices chapter 4714 takes in, rather than assuming the entire model code applies unqualified. Third, chapter 1300 qualifications and the licensing rules in chapter 4716 sit inside the examination’s frame alongside the code chapter. Fourth, the statutory layer is explicit: the guide composes the examination on chapter 4714 together with Minn. Stat. chapter 326B and lists Minnesota Statutes chapters 144, 325, and 326/326B among its bases, so law questions are a published part of the sitting rather than an ambush within it.

A candidate who studies only a national UPC text will be well prepared for the incorporated foundation and unprepared for every point at which Minnesota chose differently. In a points-scored sitting with a 70 percent threshold, those Minnesota points are not marginal.

The sitting in full: points, formats, and time

The guide’s format statement is exact. The license examinations for the master plumbing license consist of 300 points. The journeyworker examinations consist of 240 points. The time allowed to complete the master and journeyworker plumbers examination is 5.5 hours, and DLI’s schedule page independently states that all plumbing exams run 5.5 hours.

This guide states no question count, because the sources state none. That omission is deliberate and protective: secondary summaries that attach a number of questions to the Minnesota examinations have converted a points total into an item total without a published basis, and a candidate who paces preparation or the sitting itself by an invented count is planning around a number DLI has not published.

Unless stated otherwise, all questions have the same point value, and no partial points are given. The practical meaning is that every item carries equal weight in the ordinary case and that partially correct work earns nothing unless the item itself states otherwise. Formats are predominantly multiple-choice. Two departures are published and should be rehearsed rather than discovered. Some calculation questions may not include multiple-choice answers, requiring the candidate to produce the result. Some questions require more than one selection; where they do, that is identified and the number of selections is stated, so the candidate knows the shape of a complete answer before giving it.

The published sample calculation work indicates where produced-answer questions concentrate: water pipe sizing, DWV sizing, and storm water sizing, using chapter 6, chapters 7 and 9, and chapter 11 diagrams. Those are code-diagram exercises performed in the room with the provided code and calculator — the closest the Minnesota sitting comes to applied design work, and the reason sizing fluency deserves a dedicated place in any study plan.

The passing standard is published in a single sentence that covers both tiers: “The passing score for all examinations is 70%.” Examinations scoring within 1 percentage point of passing are rechecked. Results are mailed within two weeks of the sitting; results are not provided by telephone or email. Written and oral reviews of individual examinations are not available, although written comment on specific questions is allowed. A candidate therefore receives an outcome and a recheck safeguard near the line, but not a diagnostic review session — another reason the study plan below treats error-sorting during preparation, rather than after a failed sitting, as the main corrective instrument.

References in the room: the provided-materials regime

The DLI guide never reduces its reference regime to a two-word label, and this guide follows the primary text. All reference materials and a calculator are provided by the department. No other materials or electronic devices, including cell phones, are allowed in the building. Applicants are allowed to use the 2020 Minnesota Plumbing Code, chapter 4714, and an electronic calculator during their entire examination. The provided code copy does not include tabs or other aids. The provided calculator is a common desk type performing addition, subtraction, multiplication, division, square root, and percentage. The laws and rules booklet provided is current as of administration.

Each clause does work. “Provided by the department” excludes the candidate’s own books, notes, and devices at the building threshold, not merely at the desk. “During their entire examination” confirms that code and calculator access runs through the whole sitting rather than a single section. “Does not include tabs or other aids” means the code in the room is navigated by structure, table of contents, and familiarity — the skill preparation must build. “Common desk type” defines the arithmetic instrument: sizing calculations must be performable with basic operations, square root, and percentage, without programmable assistance. “Current as of administration” means the laws and rules booklet reflects the law at sitting time, rewarding candidates who studied the structure of the licensing rules rather than memorised a dated snapshot.

Fees and deadlines: $50 to sit, 180 days to license

Under Minn. Stat. §326B.092, subdivision 1(a), the application for the initial license must be accompanied by an application and examination fee of $50, which is separate from the license fee; the license fee is due after the applicant passes the examination and before the license is issued. DLI states the same position in summary as a $50 exam fee paid with the online application. Fees are nonrefundable, and no additional vendor scheduling or testing fee exists in this state-run system.

The license fees that follow a pass are published and reconciled between the statute formula and DLI’s dollars. The master initial two-year license fee is $88, composed of an $80 base and an $8 board fee. The master renewal fee is $93, composed of the $88 plus a $5 continuing-education fee component. The master late fee is $40, being one-half of the $80 base — and candidates should note that the late fee follows the base, not the total renewal figure. For ladder context, the journeyworker figures are $48 initial, $53 renewal, and $20 late.

One deadline disciplines the whole post-pass sequence: the applicant must pay the license fee within 180 days after notification of approval, or the commissioner will rescind the approval and deny the application. Combined with the one-year scheduling window after approval and the single permitted reschedule, Minnesota’s timeline is a chain of stated windows — approve, schedule within a year, pass, pay within 180 days — and a candidate who tracks the chain in writing will never lose a step to a lapsed window.

Retakes, renewal, and continuing education

A failed examination carries a mandatory interval. Applicants who fail any examination are prohibited from retaking the license examination for at least 30 days. The statute mirrors the rule from the application side: an applicant denied for failure cannot submit a further application until at least 30 days after the date of the failed examination, and DLI’s summary states that a candidate who does not pass must wait 30 days before reapplying. A failed applicant, and equally an applicant who fails to appear for a rescheduled examination, must submit a further application and examination fee before re-examination.

Master licenses expire December 31 of each even-numbered year, while journeyworker licenses expire December 31 of each odd-numbered year; renewed licenses are two-year licenses. Renewal requires 16 hours of DLI-approved continuing education completed during the license period before renewal, applying to master, journeyworker, and restricted plumbers, with at least eight of the hours relating to the State Plumbing Code. Registered unlicensed plumbers carry a separate, smaller duty of 2 hours on the Plumbing Code. A journeyworker or master licensee who does not renew within two years must retake and pass the examination before a further license will be issued — the point at which licensure history stops protecting the holder and the examined route must be walked again.

What the examination covers: knowledge areas without invented weights

DLI publishes the examination’s content as knowledge-area tables and publishes no per-area counts or percentages. The areas are: Basic Plumbing Principles; Conformance with Code; the code’s chapter 2–6 topics; Sanitary Drainage; Indirect Wastes; Vents; Traps and Interceptors; Storm Drainage; and nonpotable rainwater catchment — together with Minnesota Rules chapter 4716, Minnesota Rules chapter 1300, and miscellaneous statutes.

The shape of that list is instructive. System areas dominate — drainage, vents, traps and interceptors, indirect wastes, storm drainage — but they are framed at both ends by principle and by law: basic principles and conformance at the opening, licensing rules, building-code qualifications, and statutes at the close. Nonpotable rainwater catchment appears as its own area, reflecting its place in the adopted code rather than treatment as a footnote to storm drainage. The sizing calculations described in the format section draw principally on chapter 6 for water, chapters 7 and 9 for DWV, and chapter 11 for storm water, which tells the candidate where produced-answer practice should concentrate without pretending to a percentage blueprint that does not exist.

This guide therefore recommends the only weighting the record supports: cover every published area, give sizing work deliberate additional practice because its answer format is less forgiving, and treat the Minnesota amendments and the chapter 4716 licensing rules as first-class content rather than as an appendix to code study.

No practical component — and what that does and does not mean

No hands-on practical component is published for the Minnesota Master Plumber credential in either governing source, and no disclosure duty about a practical arises for this program. The examination as published is a written examination taken with department-provided references. The diagram-based sizing calculations are written examination work and are not described here — or by DLI — as a practical.

Everything the sitting asks is performed in the room: code lookup in an untabbed provided copy, sizing arithmetic on a basic calculator, multiple-selection judgement, and produced calculation answers. Preparation can therefore rehearse the sitting faithfully, in full, under timed conditions.

A study plan built on how this examination is put together

First, file eligibility early and correctly. Choose the route that genuinely applies — journeyworker year, equivalent out-of-state master license, or restricted master plus five years of Minnesota contracting business experience — and let DLI’s approval start the one-year scheduling window only when preparation is realistically underway.

Second, study the Minnesota code as Minnesota wrote it. Work through chapter 4714 with the amendments visible: for each major system, learn the incorporated UPC foundation and then the Minnesota change to it. Add chapter 4716, chapter 1300, and chapter 326B as scheduled material, not as background reading.

Third, build untabbed navigation. Practice timed lookups in a clean copy of the code without tabs or aids, mirroring the provided copy in the room. Speed here is a trainable skill, and 5.5 hours rewards it on every section.

Fourth, drill the three sizing families. Water pipe sizing from chapter 6, DWV sizing from chapters 7 and 9, and storm water sizing from chapter 11, worked from the code’s diagrams on a basic desk calculator until set-up and arithmetic are both automatic. Include produced-answer work, because not every calculation item offers choices.

Fifth, rehearse the full format mix. Predominantly multiple-choice sets, interleaved with multiple-selection items whose required number of selections is stated and with produced-answer calculations, all scored strictly — equal value, no partial credit unless an item states otherwise — across full 5.5-hour timed sessions.

Sixth, respect the retake economics. The 30-day interval, the further application, and the further fee make the first approved sitting the one to peak for. Schedule inside the approval year at the point the rehearsals support, holding the single reschedule unused unless circumstances genuinely require it.

The errors this examination is built to catch

Converting points into questions. The sitting consists of 300 points; any question count attached to it is invented, and pacing by one misleads. Studying the bare model code. The tested instrument is the 2018 UPC only as incorporated and amended by Minnesota in chapter 4714. Reaching for the superseded code or the superseded eligibility rule. The 2015 code is replaced, and the longer journeyworker-experience formulation for master eligibility is superseded rule text. Arriving with personal materials. References and calculator are provided; other materials and devices, including cell phones, are not allowed in the building. Assuming a vendor, a walk-in, or an immediate retest. Administration is DLI’s, approval precedes scheduling without exception, and failure carries at least 30 days before reapplication. Letting the 180-day license-fee deadline lapse. A pass unconverted by payment inside the window is rescinded.

After the sitting

Results arrive by mail within two weeks. A passing candidate pays the $88 initial license fee inside the 180-day window and receives a two-year master license expiring December 31 of an even-numbered year. Renewal requires the 16-hour continuing education duty — at least 8 hours on the code — completed during each license period. A master who lets renewal lapse beyond two years returns to the examination.

The companion program page at /minnesota-master-plumber-exam-prep/ summarises the program itself. This guide remains the fuller reference for the routes, the code layer, the room, and the clock.

Frequently asked questions

Why does Minnesota publish points instead of a question count?

Because points are the published unit of the examination. The guide states that the master examinations consist of 300 points and the journeyworker examinations of 240 points, that questions ordinarily carry equal value, and that no partial points are given. No question count is stated in the verified sources.

Does the 70 percent standard come from the licensing rule for plumbers?

The published standard used here is the examination guide’s sentence: “The passing score for all examinations is 70%.” That sentence covers master and journeyworker examinations. Examinations within 1 percentage point of passing are rechecked.

What is the difference between the $50 fee and the $88 fee?

The $50 is the application and examination fee, separate from the license fee under Minn. Stat. §326B.092, subdivision 1(a), and nonrefundable. The $88 is the master initial two-year license fee — $80 base plus $8 board fee — due after passing and before the license is issued, and payable within 180 days after notification of approval.

Can a candidate bring a personal code book if it is unmarked?

No, on the verified formulation. All reference materials and a calculator are provided by the department, and no other materials or electronic devices, including cell phones, are allowed in the building. The provided code copy includes no tabs or other aids.

Where and when is the examination offered?

At DLI’s St. Paul office on Tuesdays, Wednesdays, and Thursdays except in state-holiday weeks, and at outstate sites as listed by DLI, scheduled in DLI’s system after approval. All plumbing exams run 5.5 hours.

What if a candidate needs to reschedule?

A qualified applicant may schedule within one year after the approval notification date, with one reschedule only inside that year. An applicant who fails to appear for a rescheduled examination must submit a further application and examination fee before re-examination.

Does an out-of-state master license help in Minnesota?

Yes, through route two: a current master plumber license from another state whose requirements are equivalent to Minnesota’s, as determined by the commissioner, satisfies the master examination prerequisite stated in the sources.

How are results delivered, and can a candidate review the examination?

Results are mailed within two weeks and are not provided by telephone or email. Written and oral reviews of individual examinations are not available; written comment on specific questions is allowed.

What happens if a license is not renewed for more than two years?

A journeyworker or master licensee who does not renew within two years must retake and pass the examination before a further license will be issued.

Is PassProfessor affiliated with DLI or the Plumbing Board?

No. PassProfessor is an independent preparation provider, not affiliated with the Minnesota Department of Labor and Industry or the Minnesota Plumbing Board. DLI alone approves applicants, administers the examination, and issues licenses.

When does enrollment open for the PassProfessor program?

The program is in the works and enrollment is not yet open. Leave an email address on this page and PassProfessor will write to you when the program is ready — and only about this program.