Michigan Master Plumber licensing is administered by the Department of Licensing and Regulatory Affairs, Bureau of Construction Codes, under the Skilled Trades Regulation Act, 2016 PA 407, Article 11. The Master Plumber examination is given by PSI: 130 questions, 180 minutes, open book, with a passing score of 75 percent, tested on the 2021 Michigan Plumbing Code. This guide works through the credential in full — who may sit, what the sitting contains, how its drawing component works, and how the license follows — for candidates preparing with the PassProfessor Michigan Master Plumber program at /michigan-master-plumber-exam-prep/.
This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.
The credential at a glance
| Item | Verified position |
|---|---|
| Program | Michigan Master Plumber |
| Regulator | Department of Licensing and Regulatory Affairs (LARA), Bureau of Construction Codes (BCC) |
| Governing law | Skilled Trades Regulation Act, 2016 PA 407, Article 11; construction-code layer under 1972 PA 230 |
| Examination vendor | PSI Services LLC (PSI), for the written examination, after BCC approval |
| Examination format | 130 questions / 180 minutes / open book, by computer at PSI centers or online |
| Passing score | 75 percent |
| Examination fee | $100, paid to PSI at scheduling; valid one year from payment; nonrefundable and nontransferable |
| Tested code | 2021 Michigan Plumbing Code — tested edition and adopted edition are the same |
| Material takeoff | Inside the PSI examination: back-to-back restrooms drawing; fittings list, vent and drain sizes, venting methods |
| Separate master practical | None published for Master Plumber |
| Administrator note | PassProfessor is independent and is not affiliated with LARA, the Bureau of Construction Codes, or PSI |
How to read this guide
Michigan plumbing licensure has three examined credentials that are easy to blur and costly to confuse: journey plumber, master plumber, and plumbing contractor. This guide is about the middle one. Journey facts appear only where the ladder requires them — the master threshold is built from journey experience, and one journey-tier component must be placed correctly so that it is not mistaken for a master requirement. Contractor facts appear only to draw the boundary: the Plumbing Contractor examination is a separate law and administration program, and nothing in this guide treats it as part of the master route.
Facts are also layered, and the layer is part of the fact. The passing score and the examination mechanics rest on the PSI Candidate Information Bulletin for the Michigan Bureau of Construction Codes. The eligibility thresholds, the license fee, and the code-update renewal position rest on statute and rule. Where the verified sources publish no figure — no per-topic question counts, no course hour count for the code-update requirement — this guide prints none and says so, rather than filling the gap with a plausible number.
The authority structure
The Department of Licensing and Regulatory Affairs houses the Bureau of Construction Codes, which administers plumber licensing under Article 11 of the Skilled Trades Regulation Act, 2016 PA 407, MCL 339.6101 to 339.6133. The construction-code layer sits in a second Act, the Stille-DeRossett-Hale Single State Construction Code Act, 1972 PA 230, under which the plumbing code is adopted in Part 7 of the administrative rules.
That two-Act structure explains the examination’s reference list. A Master Plumber candidate is examined on the plumbing code and on both Acts: 2016 PA 407 because it creates and governs the license, and 1972 PA 230 because it carries the construction code within which plumbing work is performed and inspected. PSI delivers the written examination, but the division of labor is strict: Bureau approval precedes scheduling, and only the State of Michigan may determine eligibility. A scheduling confirmation from PSI is not an eligibility decision, and candidates should treat any question about whether their experience qualifies as a Bureau question, not a test-center question.
Eligibility in full
A Master Plumber applicant must satisfy every element of the published threshold. The applicant must be at least 18 years of age. The applicant must hold a journey plumber license. The applicant must have gained 4,000 hours of experience in work as a journey plumber over a period of not less than 2 years immediately preceding the date of application. The applicant must then pay the examination fee, pass the examination, and pay the license fee.
Each element excludes a common misreading. The age element is a floor, not a substitute for experience. The license element requires the journey credential itself, not merely journey-level work performed without it. The hours element counts experience in work as a journey plumber, so apprentice hours — which Michigan counts generously at the journey stage — do not carry forward into the master total. The period element requires that the 4,000 hours be spread over not less than 2 years, so an intensive shorter period does not satisfy it even if the hour total is reached. The recency element ties the qualifying period to the date of application: it must be the period immediately preceding that date.
Below the master threshold, the journey prerequisite core gives the ladder its shape. A journey applicant must be at least 18, must complete not less than 6,000 hours over not less than 3 years as a registered plumbing apprentice in practical installation work under a licensed master plumber, and must pass both the written portion and the practical portion of the journey examination. Apprentice status itself is registration only, with no examination. A candidate planning the full route should therefore count two examined steps — journey, then master — with registered apprentice experience before the first and licensed journey experience before the second.
The code: what “2021 Michigan Plumbing Code” actually means
The single most consequential study decision in Michigan is which book to learn. The verified position is unusually clean, provided it is stated completely. Tested equals adopted. The tested edition is the 2021 Michigan Plumbing Code. The adopted edition is the same 2021 Michigan Plumbing Code, effective March 12, 2024.
That Michigan code consists of the International Plumbing Code, 2021 second printing edition, including appendices B, C, D, and E, as adopted by reference in Part 7, R 408.30701, with the enumerated Michigan exclusions and amendments. Three practical consequences follow. First, study the Michigan book: wherever a Part 7 exclusion or amendment speaks, Michigan text governs over the model text, and examination composition keys to the Michigan code. Second, study the appendices named in the adoption, because they are part of the adopted instrument rather than optional supplements. Third, disregard edition drift in both directions: material keyed to an earlier Michigan code does not describe the current sitting, and a rule proposal pointing toward a later model-code edition is a proposal only — it is neither the adopted code nor the tested code for this program, and this guide treats it as neither.
The bulletin reinforces the same discipline in its reference wording. For the journey examination it lists the “2021 Michigan Plumbing Code Book”; for Master it lists “The 2021 Plumbing Code Book,” in each case with chapter tabs only, plus — for Master — 1972 PA 230 and 2016 PA 407. At no point does the verified bulletin present a bare model code, without the Michigan adoption layer, as the book to bring.
The sitting: delivery, timing, and scoring
The Master Plumber examination contains 130 questions and allows 180 minutes. It is open book under the reference rules detailed in the next section. It is delivered by computer, either at a PSI center or online. Online delivery for Master Plumber and Plumbing Contractor testing has been available from February 11, 2026; the internal markers of the bulletin of record read “Effective 4/29/2026,” and this guide cites no bulletin date beyond those markers. Online delivery is not available for the journey written examination, so a shop or family preparing candidates at two tiers at once will be working with two different delivery menus.
The minimum passing score is 75 percent, as printed in the bulletin table in the form “Master Plumber — 130 — 75% — 180 Minutes.” Candidates will encounter a 70 percent figure in secondary material about Michigan plumbing examinations. That figure is wrong for this examination, and this guide does not use it. The distinction is not pedantry: a candidate calibrating timed practice to a lower assumed threshold misjudges the margin the sitting actually requires, particularly on a paper that combines direct code questions with a drawing-based takeoff task.
The score is displayed on screen at the end of the sitting. A candidate who does not pass receives a diagnostic report, which is the natural starting point for structuring any further preparation. The $100 examination fee is paid to PSI at scheduling, is valid for one year from payment, and is nonrefundable and nontransferable. To cancel or reschedule without forfeiting the fee, notice must be received 2 days before the scheduled date, through PSI by phone or website; voicemail and email do not satisfy that requirement.
Reference rules: the open-book conditions in detail
Open book describes permission to consult a book; Michigan’s bulletin then specifies which book, in what condition, and what else may or may not enter the room. For Master Plumber, the candidate brings only the 2021 code book, with chapter tabs only. The texts of 1972 PA 230 and 2016 PA 407 are provided on screen during the examination and may not be brought in — a sensible division, since the Acts are examined as governing law to be consulted in the sitting’s own presentation, while the code book is the candidate’s working tool.
Condition rules apply to everything brought in. All reference material must be bound. No highlights, underlining, or marking of any type is permitted. No additional papers are permitted, loose or attached. Printed documents from the Bureau website, where a candidate relies on them under the bulletin rules, must be bound by 3 staples on the left edge, in separate documents, and highlighting, marking, and tabs in those printed documents are not permitted.
Study method should mirror these conditions from the beginning of serious preparation. Work from a compliant copy of the code book. Navigate by chapter tabs and by the book’s own structure rather than by personal annotation. Practice locating provisions — drainage, venting, water distribution, backflow, storm, special waste — by chapter position until the search itself costs little time. A candidate who has rehearsed only with a marked-up bench copy has rehearsed a different examination from the one Michigan administers.
The material takeoff in depth
The bulletin describes one component of the Master Plumber examination in narrative detail, and it deserves a section of its own. In substance, the bulletin states: “The material take off practical portion of the exam consists of a drawing indicating back-to-back rest rooms. All pertinent data is provided to enable the applicant, using the plumbing code, to list the required amount of fittings to be used, vent and drains sizes, and to identify venting methods.”
Four observations follow. First, location: the takeoff is a portion of the PSI examination itself, within the same 130-question, 180-minute sitting — not scheduled separately or assessed as a physical installation. Second, input: a drawing indicating back-to-back restrooms, with all pertinent data provided — a task of interpretation and code application, not of inventing missing design information. Third, method: the applicant works “using the plumbing code.” Fourth, output: three deliverables — the required amount of fittings, vent and drain sizes, and the venting methods. A complete response addresses all three.
A paired restroom group concentrates fixtures, shared drainage, and venting decisions in a compact drawing, testing whether the candidate reads a system whole: what drains where, at what size, vented by what method, with what fittings at each change. Preparation that repeatedly works complete small systems from a drawing will feel familiar here. This guide offers no invented variant drawings, counts, or scoring weights for the component beyond the published description.
What the examination covers: the narrative outline
For Master Plumber, the bulletin gives a narrative topic list and no per-area question counts. The topics are drainage systems; general knowledge; fixtures; water distribution; backflow protection; storm drains; special waste; testing; inspections; venting; and knowledge of the Skilled Trades Regulation Act, 2016 PA 407.
Read as a whole, the list moves through the life of an installation. Drainage systems, fixtures, water distribution, and venting cover the core systems a master must design, supervise, and answer for. Backflow protection addresses the boundary between the plumbing system and the potable supply. Storm drains and special waste extend the sitting beyond ordinary sanitary work into the streams that carry separate risks and separate code treatment. Testing and inspections address verification — how work is proved and examined before it is covered or accepted. General knowledge holds the fundamentals that do not belong to a single system. Knowledge of 2016 PA 407 closes the list with the licensing Act itself: who may do what work, under what credential, within what structure.
Because no per-area counts are published, this guide assigns no percentages and recommends no weighting scheme derived from guesswork. Balanced coverage of the full list, with additional timed attention to the takeoff component whose form is described in detail, is the study posture the published record supports.
The practical question, answered completely
Michigan candidates frequently ask whether the master route includes a hands-on practical, usually because the journey route does. The verified answer for Master Plumber is that no separate Department-administered practical exists for this tier and no hands-on component is published for the master examination. The only practical element named for Master is the material takeoff portion inside the PSI examination, described above — a drawing-based listing, sizing, and venting-method task performed with the code book, not a construction project.
The separate practical that does exist in Michigan plumbing belongs to journey licensure: a Department and Bureau-administered copper project, required alongside the journey written examination for applications after December 15, 2021. It is part of how a journey plumber qualifies. It is not carried upward into the master examination, and a master candidate — who by definition already holds the journey license — does not face it again as a master requirement. Any preparation offer that presents a hands-on project as something a Michigan Master Plumber candidate must complete for the master examination is describing the wrong tier. Conversely, journey candidates should not take this guide’s master answer as applying to them: their route does include that practical, and their own program addresses it.
Fees, license term, and renewal
Fees in Michigan sit in two layers, and conflating them produces most of the confusion in secondary summaries. The examination layer is PSI’s: $100 for the Master Plumber examination, paid at scheduling, valid one year from payment, nonrefundable and nontransferable, and charged again for each retest attempt. No examination fee is paid to the State or the Bureau at scheduling.
The license layer is statutory. Under MCL 339.6121, the initial and renewal fee for a master plumber license is $300.00, for a period of up to 3 years, renewable for periods of 3 years, prorated yearly outside the April 30 to June 30 issuance window. A master plumber who is also a plumbing contractor pays only the contractor fee. This guide attributes the $300 figure to the statute in those terms; it does not present the figure as a test-center charge, and candidates should confirm current Bureau charging practice through Bureau channels when they apply.
On renewal education, Michigan’s position is narrower than the fixed-hour regimes candidates may know from other states or other trades. The verified sources state no fixed-hour continuing education requirement for the master plumber license. What they state is an event-triggered duty: as a condition of renewal, a master plumber must demonstrate successful completion of a board-approved course concerning any update or change in the state construction code within 12 months after the update or change, and that duty applies only during and after years in which the code is updated or changed. No hour count for that course is stated in the verified sources, and this guide prints none. The practical consequence is that a Michigan master watches code-adoption events, not an annual hour clock, to know when the renewal education duty is triggered.
Retakes and rescheduling
The bulletin’s retest sentence is short and this guide preserves its scope: if you fail you may retest, without a stated limit on attempts in the bulletin text, and you must pay the examination fee for each attempt. No minimum wait between attempts is stated in the retrieved bulletin text, and this guide states no wait as a rule. Cancellation and rescheduling are governed by the 2-day notice rule described above: notice received 2 days before the scheduled date, through PSI by phone or website, preserves the fee position; voicemail and email are not acceptable channels for that notice.
A candidate who does not pass should use the diagnostic report provided after the sitting to sort the result before booking again. On a 130-question paper with a described drawing component, the useful questions are specific: were misses concentrated in a single listed topic, in code-book navigation under time pressure, or in the takeoff deliverables — fittings, sizes, or venting methods? Each pattern calls for different work, and retesting on a short cycle without that sorting spends the per-attempt fee without changing the underlying performance.
A study plan built on how this examination is put together
First, secure the eligibility file. Confirm the journey license, count the 4,000 hours of journey work across not less than 2 years immediately preceding the intended application date, and resolve any doubt with the Bureau before scheduling. Examination preparation built on an ineligible application helps no one.
Second, rebuild code navigation under sitting conditions. Work from a bound, unmarked copy of the 2021 Michigan Plumbing Code with chapter tabs only. Drill location speed across the narrative topics until finding a provision is a practiced movement rather than a search.
Third, cover the narrative outline whole. Drainage systems, general knowledge, fixtures, water distribution, backflow protection, storm drains, special waste, testing, inspections, venting, and the Skilled Trades Regulation Act — each in turn, keyed to the Michigan code and the two Acts in their on-screen role.
Fourth, practice the takeoff as its own discipline. Work complete back-to-back restroom style drawings from provided data: list every required fitting, size vents and drains from the code, and name the venting methods, checking that all three deliverables are present before time is called. Alternate takeoff work with ordinary questions inside timed sessions, because the sitting itself interleaves them.
Fifth, sit full timed rehearsals. One hundred thirty questions in 180 minutes sets the pace for everything else. Rehearsals should be uninterrupted, open-book only in the compliant configuration, and reviewed by error type — content gaps, navigation delays, and takeoff omissions scored separately.
The errors this examination is built to catch
Studying the bare model code. Where a Michigan amendment speaks, the model text alone gives the wrong answer. Calibrating to 70 percent. The verified threshold is 75 percent; practice scored to a lower line flatters the candidate. Expecting a separate master practical — or expecting none at journey level. The tiers differ: master has the in-exam takeoff and no separate practical; journey has the Department-administered copper project. Bringing an annotated book. Highlights, underlining, markings, and loose papers breach the reference conditions regardless of how helpful they were during study. Treating the contractor examination as master content. Law and administration for the contractor credential is a separate program; blending it into master preparation dilutes both. Inventing topic weightings. The bulletin publishes no per-area counts, and a plan built on guessed percentages starves topics the sitting does cover.
After the sitting: from pass to practice
Passing completes the examined step; the license follows on payment of the license fee, within the statutory structure described above. The credential then runs on renewal periods of up to 3 years, with the event-triggered code-update course duty as its renewal education position. The master license rests on licensed journey experience because the master carries wider responsibility than the journey tier — the system-level judgement that the takeoff drawing and the narrative outline together examine.
The companion program page at /michigan-master-plumber-exam-prep/ summarises the program itself.
Frequently asked questions
What is the full name of the Michigan master credential?
Master Plumber, licensed under Article 11 of the Skilled Trades Regulation Act, 2016 PA 407, and administered by the Bureau of Construction Codes within the Department of Licensing and Regulatory Affairs.
How is Bureau approval different from PSI scheduling?
Bureau approval comes first and concerns eligibility, which only the State of Michigan may determine. PSI scheduling follows approval and concerns delivery of the written examination.
What are the exact eligibility requirements for the master examination?
At least 18 years of age; a journey plumber license held; 4,000 hours of experience in work as a journey plumber over not less than 2 years immediately preceding the application date; then payment of the examination fee, passing the examination, and payment of the license fee.
Does apprentice experience count toward the 4,000 hours?
No, as the threshold is stated. The master requirement counts experience in work as a journey plumber. Apprentice experience — not less than 6,000 hours over not less than 3 years as a registered apprentice under a licensed master — is the foundation for the journey license itself.
Which code book should be used for study?
The 2021 Michigan Plumbing Code: the 2021 International Plumbing Code, second printing, including appendices B, C, D, and E, as adopted by reference in Part 7, R 408.30701, with Michigan exclusions and amendments, effective March 12, 2024. Tested and adopted editions are the same.
How is the examination scored, and when is the result known?
The passing score is 75 percent. The score is displayed on screen at the end of the sitting, and a candidate who does not pass receives a diagnostic report.
What exactly happens in the material takeoff portion?
Inside the PSI examination, the candidate receives a drawing indicating back-to-back restrooms with all pertinent data provided, and, using the plumbing code, lists the required amount of fittings, gives vent and drain sizes, and identifies venting methods.
Is there a hands-on examination for Michigan Master Plumber?
No hands-on component and no separate Department-administered practical are published for Master Plumber. The Department-administered copper project practical belongs to the journey tier, for the journey applications to which it applies.
What does the examination cost, and who receives the fee?
The examination fee is $100, paid to PSI at scheduling. It is valid for one year from payment and is nonrefundable and nontransferable. The separate statutory license fee for a master plumber license is $300.00 for a period of up to 3 years, as stated in MCL 339.6121.
What continuing education does renewal require?
No fixed-hour requirement is stated in the verified sources. Renewal carries an event-triggered duty to complete a board-approved course concerning any update or change in the state construction code within 12 months after the update or change, in years when the code is updated or changed. No hour count is stated.
Is PassProfessor affiliated with LARA, the Bureau, or PSI?
No. PassProfessor is an independent preparation provider, not affiliated with the Department of Licensing and Regulatory Affairs, the Bureau of Construction Codes, or PSI. The State alone determines eligibility and issues licenses.
When does enrollment open for the PassProfessor program?
The program is in the works and enrollment is not yet open. Leave an email address on this page and PassProfessor will write to you when the program is ready — and only about this program.
