The Massachusetts Journeyman Plumber license is issued under the Board of State Examiners of Plumbers and Gas Fitters, operating under M.G.L. c. 142 and 248 CMR inside the Division of Occupational Licensure. Massachusetts examines on 248 CMR 10.00, its own Uniform State Plumbing Code — a state-written code that adopts no model code. The examination is delivered by PSI, is entirely closed book, and is scored in two stand-alone parts: a candidate must reach at least 70 percent on each part. This guide sets out the credential, the examination and the preparation route in full. Its companion program page is at /massachusetts-journeyman-plumber-exam-prep/.
This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.
The credential at a glance
| Item | Verified position |
|---|---|
| Program | Massachusetts Journeyman Plumber |
| Regulator | Board of State Examiners of Plumbers and Gas Fitters (M.G.L. c. 142 + 248 CMR), housed in the Division of Occupational Licensure |
| Code examined | 248 CMR 10.00 — the Massachusetts Uniform State Plumbing Code, state-written; Massachusetts adopts no model code for this examination |
| Pre-approval | Board pre-approval through eLIPSE is required before scheduling |
| Vendor | PSI, under the Board-written Candidate Information Bulletin dated 10/3/2025 |
| Book status | Closed book — all parts |
| Structure | Part I: 80 questions / 160 minutes. Part II: 40 questions / 160 minutes |
| Passing standard | Minimum 70 percent on EACH part — the parts carry stand-alone scores and do not average |
| Part II character | Labelled “Practical” but computer-based; Isometric Analysis accounts for 20 of its 40 questions; there is no hands-on component |
| Official fees | Application $31; PSI examination $80; license on passing $52 |
| Administrator note | PassProfessor is independent and is not affiliated with the Board of State Examiners of Plumbers and Gas Fitters or the Division of Occupational Licensure |
Massachusetts rewards the candidate who reads its system in its own terms. The statute, the regulation, the Board’s bulletin and the licensing system each carry a different layer of the route, and most preparation failures in this state are layer failures: studying a model code for a state-written-code sitting, expecting a hands-on practical that the bulletin replaces with a screen, or trying to schedule an examination before the pre-approval that must precede it. This guide keeps the layers separate, in the order a candidate meets them.
Reading the verified facts
Every examination figure in this guide comes from the Board’s own material: the Candidate Information Bulletin written by the Board and delivered through PSI, dated 10/3/2025, together with 248 CMR and the Division of Occupational Licensure’s licensing information. That sourcing discipline matters in Massachusetts more than in most states, because secondary material about this examination is heavily contaminated by model-code assumptions. A study source that describes Massachusetts in International Plumbing Code or Uniform Plumbing Code terms is describing a different examination. Where this guide states a count, a time, a fee or a passing figure, it is the Board’s figure; where the Board publishes no figure, this guide prints none.
The route, step by step
Step one — complete the ladder. The journeyman examination is not an entry point. Behind it stand 6,800 hours of practical experience and 550 hours of theory instruction in five tiers, worked under 1:1 supervision, with apprentices employed by a master plumber only. Step two — obtain Board pre-approval. The candidate applies to the Board and is approved through eLIPSE, the Division’s licensing system, paying the $31 application fee. No examination appointment can precede this step. Step three — schedule with PSI. The approved candidate schedules under the Board-written Candidate Information Bulletin dated 10/3/2025 and pays the $80 examination fee. Step four — sit both parts, closed book. Part I presents 80 questions in 160 minutes; Part II presents 40 questions in 160 minutes. Step five — meet the standard twice. At least 70 percent on Part I and at least 70 percent on Part II, scored separately. Step six — take up the license. On passing both parts, the license issues on payment of the $52 license fee. A candidate who clears one part and misses the other has a part-level problem to solve under the Board and PSI retake procedures — not a near miss to average away.
The code in depth: 248 CMR 10.00
The Massachusetts Uniform State Plumbing Code at 248 CMR 10.00 is the examination’s entire technical universe, and its defining trait is independence. Massachusetts wrote its own plumbing code; it did not adopt the International Plumbing Code, and it did not adopt the Uniform Plumbing Code. Candidates sometimes assume that a state code must be a model code with amendments, because that is the common pattern nationally. In Massachusetts the assumption fails at the root. There is no model text underneath 248 CMR 10.00 to fall back on, no model-code commentary that explains it, and no other state’s edition that matches it.
Three consequences follow for study. First, the code must be learned directly, provision by provision, in the form Massachusetts publishes it — definitions, scope and administration included, because the definitional layer decides how the technical provisions apply. Second, prior model-code knowledge is an asset only after verification: each remembered rule must be confirmed against the Massachusetts text, and the rules that differ must be marked as Massachusetts exceptions in the candidate’s own notes, because those exceptions are precisely what a well-built examination item targets. Third, the closed-book condition removes any safety net. In an open-book state, a candidate can survive on recognition plus lookup; in Massachusetts, an unverified memory walks into the room unaccompanied. The study method later in this guide is built around that reality: verified recall, rehearsed until retrieval is fast enough for two minutes a question.
Part I in depth: the recall paper
Part I is the breadth paper: 80 questions in 160 minutes, two minutes per question, closed book. Its demand is coverage at speed. The candidate must move across the code’s whole territory — drainage, waste and venting; water distribution; fixtures; sizing and arrangement; administration and definitions — producing the Massachusetts requirement for each situation from memory, without pausing to reconstruct it. Two minutes is generous for a fact the candidate knows and unforgiving for a fact the candidate half-knows: the half-known item consumes three questions’ worth of time and still returns a guess.
Preparation for Part I is therefore a coverage audit before it is anything else. The candidate lists the code’s territories, tests each one cold, and ranks them by retrieval quality rather than by familiarity. Familiarity is a liar in closed-book work: a provision read twenty times feels known, and then cannot be produced when a question asks for its number, its exception or its condition. Cold testing — question first, book closed, answer produced — is the only honest measure, and the study plan below is built on it. Part I also punishes a subtle Massachusetts-specific error: answering with the model-code figure. Under time pressure, memory serves the most practised version of a rule, and for a candidate trained on a model code that version is the wrong one. The cure is deliberate contrast practice: Massachusetts figure against model-code figure, side by side, until the Massachusetts figure is the one that arrives first.
Part II in depth: the drawing paper
Part II is the depth paper: 40 questions in 160 minutes, four minutes per question, closed book, computer-based. Its centrepiece is Isometric Analysis at 20 of 40 questions — half the paper. An isometric drawing presents a plumbing system in three-dimensional diagram form: runs of pipe, fittings, fixtures, vents and drains in spatial relationship. The candidate must read that representation fluently before any code question about it can be answered. What does this run serve? Where does this vent connect? Does this arrangement comply, and if not, which requirement does it offend and what change cures it?
The skill is composite, and each layer can fail independently. A candidate may know the code cold and misread the drawing, tracing a run to the wrong fixture. A candidate may read the drawing perfectly and apply a model-code rule instead of the Massachusetts rule. A candidate may do both correctly and still run short of time, because four minutes per question disappears quickly when a drawing must be studied before it can be reasoned about. Training Part II therefore means timed drawing work: isometrics read under the clock, systems traced aloud or on paper, code questions answered from the drawing alone. It also means accepting the paper’s identity. Part II is labelled “Practical,” and it does examine practical judgement — but it examines that judgement through a screen and a drawing, not through the candidate’s hands. There is no pipe to assemble and no installation to inspect in person. Candidates who understand that distinction early prepare for the paper that exists; candidates who miss it prepare for a paper that does not.
The ladder in depth: hours, tiers and supervision
The journeyman license certifies the end of a formation, and the formation’s numbers are worth learning precisely because they shape what the examination assumes. The practical requirement is 6,800 hours. The theory requirement is 550 hours, organised as five tiers. Supervision is one-to-one: one journeyman’s or master’s oversight for one apprentice, not a crew ratio stretched across a site. And the employment rule is categorical: apprentices are employed by a master plumber only.
Read together, those four facts describe a system that refuses dilution. The Commonwealth does not allow the apprenticeship to become unsupervised labour with a theory course attached; it binds experience, instruction and personal supervision together and then examines the result from memory against its own code. For the candidate, the ladder also explains the examination’s confidence. A paper that asks for code figures without a book is reasonable only if the candidate has genuinely been taught — 550 theory hours is a substantial curriculum — and the Board’s closed-book design states, in effect, that the teaching happened and the sitting will verify it. Candidates still inside the ladder should align their tier study with the licensing sitting from the start: notes organised by code provision, figures learned as Massachusetts figures, and drawings practised as a habit rather than as a final-month addition.
A closer look: the eLIPSE gate and the “Practical” label
Two features of the Massachusetts route repay a slower pass, because each one defeats candidates who rely on general expectations. The first is the eLIPSE gate. In many states a candidate books an examination and regularises paperwork around the booking. Massachusetts inverts that order: the Board pre-approves the candidate through eLIPSE, the Division of Occupational Licensure’s system, and only then does PSI scheduling open. The $31 application fee belongs to this step. A candidate who has not secured pre-approval has no examination date to prepare toward, and study plans built on an assumed date collapse when the approval timeline differs. The operational rule is simple: start the approval early, confirm it in the system, and schedule the sitting against the confirmed approval.
The second feature is the “Practical” label on Part II, addressed above and repeated here because it is the most consequential misunderstanding available in this examination. The word invites images of a workshop assessment. The bulletin delivers a computer-based paper in which Isometric Analysis is half the content. The disclosure matters ethically as well as practically: no preparation program, including this one, should sell hands-on rehearsal for an examination that contains no hands-on component, and no candidate should pay for bench practice aimed at Part II. What Part II rewards is drawing literacy plus code recall under time — a trainable, examinable skill set that has nothing to do with manual dexterity.
The sitting itself
The sitting is a PSI testing-centre event, conducted under the Board-written Candidate Information Bulletin dated 10/3/2025, in closed-book conditions for both parts. Part I runs 80 questions in 160 minutes; Part II runs 40 questions in 160 minutes. Scores are stand-alone by part, and the passing standard — a minimum of 70 percent — applies to each part independently. The official fees across the route are the $31 application fee, the $80 PSI examination fee and the $52 license fee payable on passing. Candidates should treat the bulletin as the governing document for identification, centre conduct and retake procedures, and should confirm their eLIPSE pre-approval is in place before travelling to a sitting that cannot be rebooked on the spot.
A study plan built on how this examination is actually put together
Sequence the work by the examination’s own structure. First, the code map. Work through 248 CMR 10.00 territory by territory, building a personal index of provisions, figures and exceptions — with every model-code conflict explicitly marked. Second, cold recall for Part I. Timed, book-closed question sets at two minutes per question, scored by territory, with weak territories recycled until retrieval is immediate. Third, drawing work for Part II. Timed isometric exercises at four minutes per question: trace the system, state what it serves, judge its compliance, name the cure. Fourth, part-level readiness checks. Full part-length practice sittings, scored separately, with readiness judged against 70 percent on each part independently — never against a combined average. Fifth, the administrative route in parallel. eLIPSE pre-approval started early enough that scheduling never compresses the final study weeks.
The working method: turning the code into a performance
Knowing the code and performing it closed-book are different attainments, and the method below closes the gap. Practise closed from the start. Every practice question is attempted book-closed and timed; the book opens only for correction, never for answering. Sort every error by kind. Misses divide into four families: provisions never learned, Massachusetts figures displaced by model-code figures, drawings misread, and time lost to hesitation. Each family has a different cure, and study spent on the wrong cure is wasted twice. Keep the parts separate in training and in scoring. Part I sessions train breadth at recall tempo; Part II sessions train depth at drawing tempo; the scores are recorded separately, mirroring the Board’s own verdict. Revisit on a lengthening interval. Correctly answered material returns after days, then weeks; missed material returns the next day. By the sitting, the candidate has retrieved every major provision repeatedly, from memory, in mixed company, at examination tempo.
The errors this examination is built to catch
Massachusetts catches assumption errors. Studying a model code for a state-written-code sitting is the foundational one. Trusting the “Practical” label and preparing for hands-on work that does not exist wastes the Part II preparation window. Averaging the parts in self-assessment hides the failing part until the Board reveals it. Scheduling before pre-approval inverts the route’s fixed order. Answering from field habit — what a candidate’s own crew does — instead of from 248 CMR 10.00 confuses practice with code. And pacing Part II like Part I squanders the drawing time the paper’s four-minute allowance exists to provide.
Massachusetts in one view
Massachusetts in one view is a Commonwealth that wrote its own code, built a supervised ladder beneath its license, and examines the result from memory in two separately judged parts. The statute authorises; the regulation at 248 CMR — above all 10.00 — governs; the Board pre-approves through eLIPSE; PSI delivers; and the candidate performs without a book, once at recall tempo and once at drawing tempo, needing 70 percent both times. Almost every error available in this state is a refusal to take that structure literally: a model code studied instead of the Massachusetts text, a practical imagined instead of the computer-based paper described, an average calculated instead of two verdicts faced. The candidate who takes the structure literally — code, ladder, gate, two parts — will find the examination demanding but legible: a sitting that asks exactly what the Commonwealth’s formation was designed to teach.
After the sitting: the license and its place in the ladder
Passing both parts at 70 percent or better completes the examined route, and the license issues on payment of the $52 license fee. The journeyman license is a working credential inside a continuing structure: the journeyman who was supervised one-to-one as an apprentice now stands on the supervising side of that same ratio, and the master license remains the ladder’s next examined rung for those who go on. Candidates who miss one part should read the result the way the Board delivers it — as a part-level diagnosis. The passing part’s stand-alone score stands; the failed part defines the remaining study task precisely, and retake follows the Board and PSI procedures for that part.
Frequently asked questions
Which code does the Massachusetts journeyman examination test?
248 CMR 10.00, the Massachusetts Uniform State Plumbing Code. It is state-written and adopts no model code.
Who writes the examination rules for Massachusetts plumbing?
The Board of State Examiners of Plumbers and Gas Fitters, under M.G.L. c. 142 and 248 CMR. The examination is delivered by PSI under the Board-written Candidate Information Bulletin dated 10/3/2025.
How many questions are on the examination, and how long does it take?
Part I has 80 questions in 160 minutes. Part II has 40 questions in 160 minutes. Both parts are closed book.
What is the passing score?
A minimum of 70 percent on each part. The parts are scored separately and do not average.
Is Part II really a practical examination?
It carries the “Practical” label but is computer-based, sat at a PSI testing centre. Isometric Analysis accounts for 20 of its 40 questions. There is no hands-on component, and no hands-on rehearsal is needed or offered for it.
What is Isometric Analysis?
The Part II skill of reading isometric drawings of plumbing systems and reasoning from the drawing to the code — what the system serves, whether it complies, and what correction a violation requires.
Why must candidates be pre-approved before scheduling?
Because the route is ordered that way. The Board pre-approves candidates through eLIPSE, and only an approved candidate schedules with PSI.
What experience and education does the journeyman license require?
6,800 hours of practical experience and 550 hours of theory instruction in five tiers, under 1:1 supervision, with apprentices employed by a master plumber only.
What fees does the official route carry?
An application fee of $31, a PSI examination fee of $80, and a license fee of $52 payable on passing.
Can field experience substitute for code study?
No. The examination tests 248 CMR 10.00 from memory. Field habit and model-code knowledge both differ from the Massachusetts text in places, and the sitting is built to find those differences.
What happens if a candidate passes one part and fails the other?
The passing part’s stand-alone score stands, and the failed part must be addressed under the Board and PSI retake procedures. There is no combined score to fall back on.
Is PassProfessor affiliated with the Board?
No. PassProfessor is an independent preparation provider. The Board alone licenses, pre-approves candidates and sets the examination.
When does enrollment open for the PassProfessor program?
The program is in the works and enrollment is not yet open. Leave an email address on this page and PassProfessor will write to you when the program is ready — and only about this program.
