Indiana Plumbing Contractor Exam Guide: The Credential, the Commission’s Rules, and the Route Between Them

Indiana has no Master Plumber license. The top examined tier is the Plumbing Contractor, licensed by the Indiana Plumbing Commission under the Indiana Professional Licensing Agency, with Prov administering the Indiana Plumbing Examinations to approved candidates. This guide works through the credential, the qualification definitions, the adopted code, and the limits of what Indiana publishes about its own examination. The companion program page is at /indiana-plumbing-contractor-exam-prep/.

This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.

The credential at a glance

ItemVerified position
ProgramIndiana Plumbing Contractor: the top examined tier of Indiana plumbing licensure; Indiana has no Master Plumber license
RegulatorIndiana Plumbing Commission, under the Indiana Professional Licensing Agency (PLA), under Indiana Code 25-28.5 and 860 Indiana Administrative Code
Examination vendorProv — verified; approved candidates register at provexam.com under the bulletin “Indiana Plumbing Examinations”
Adopted code2012 Indiana Plumbing Code (675 IAC 16-1.4), built on the International Plumbing Code, 2006 edition, second printing, with Indiana amendments
Examination formMultiple choice, under 860 IAC 1-3-1.1; the candidate must obtain a passing score
EligibilityAge 18 or older, plus at least four qualifying years by one of three routes (see below)
AttemptsSeven total attempts within two years of the date first scheduled
Board fees (PLA)Application $50; issuance $50 in an odd year / $100 in an even year; renewal $100; licenses expire December 31 of every odd year
Continuing educationNone — Indiana imposes no continuing-education requirement for plumber renewal
Administrator notePassProfessor is independent and is not affiliated with the Indiana Plumbing Commission, the Indiana Professional Licensing Agency, or Prov

Indiana rewards candidates who read it in its own layers, and this guide is organized by those layers: the credential layer (what the license is and what sits beside it), the qualification layer (how the Commission counts a candidate’s years), the code layer (what Indiana adopted and what can honestly be said about the tested edition), and the examination layer (what the rules publish — and what they do not). The discipline throughout is the same: a fact is printed only at the strength its source supports.

The credential layer: two examined tiers, and the titles around them

Indiana examines two plumbing titles: Journeyman Plumber and Plumbing Contractor. The contractor is the top tier. There is no Indiana Master Plumber license, and the point is not pedantry — it determines which examination a senior plumber prepares for, which qualification standard applies, and which code framework the preparation must serve. A candidate holding a top-tier license from another state, however it is titled there, enters Indiana’s system as an applicant for the Indiana Plumbing Contractor examination.

The same licensing framework also carries titles that are not won through this examination: Plumbing Apprentice, a registration; Temporary Plumbing Contractor; and Plumbing Corporation. The guide mentions them for one reason only — to keep the map honest. None of them is the contractor license, none is obtained by passing the contractor examination, and none shortens the examined route described here.

What the contractor tier represents, in the structure Indiana built, is the examined summit of the trade in the state: the tier whose holders the qualification rules themselves use as reference points. One of the routes into the examination, described below, is defined as years spent working in a plumbing business under the direction of a licensed plumbing contractor — the credential is the standard the next candidate’s experience is measured against. That is the position the examination certifies entry to.

The qualification layer: how Indiana counts four years

Every route into the contractor examination is an experience route, and the Commission’s definitions do the real work. An applicant must be at least 18 years old, and must then qualify by one of three paths.

Route one — the approved apprenticeship. At least four years in a Commission-approved apprenticeship program. The rule definition of that program is exact: at least 576 hours of classroom instruction and at least 6,400 hours of on-the-job training, over at least four years. A candidate whose apprenticeship was shorter in hours, however strong its sponsor’s reputation, should measure the record against those two numbers before applying.

Route two — documented trade experience. A notarized statement of at least four years of experience in the plumbing trade. The notarization is part of the qualification, not a clerical afterthought: Indiana asks the candidate to swear to the record, and the definition of the years is the same arithmetic as below.

Route three — work under a licensed contractor. At least four years working in a plumbing business under the direction of a licensed plumbing contractor. This route ties the candidate’s history directly to the credential being sought — the years were supervised from the tier the candidate now wants to join.

Three counting rules govern all three routes, and each one defeats a common assumption. First, “four years of experience” means at least 6,400 hours accumulated over at least four years — both conditions, not either. Second, no more than 40 hours may be counted from any single calendar week, so overtime cannot compress the calendar: a candidate cannot work the hours faster than the years allow. Third, prior credit is capped at 75 percent, limiting how much earlier experience can be carried into the qualification. Employer affidavits are required to document the record. The practical lesson is to assemble the paper before filing: hours, weeks, employers, and affidavits, reconciled against the definitions while there is still time to repair a gap.

Two clocks then run in parallel, and a candidate should keep them separate. An application whose requirements are not submitted within one year of filing is treated as abandoned — that is the paperwork clock. The examination clock, described in the retake section below, runs from the date the examination is first scheduled. Confusing the two is an unforced error: eligibility can lapse while a candidate believes the only deadline is the sitting.

The code layer: what Indiana adopted, and an honest limit on the tested edition

The adopted layer is fully verified. Indiana’s plumbing code is the 2012 Indiana Plumbing Code, at 675 IAC 16-1.4: the International Plumbing Code, 2006 edition, second printing, as the model base, with Indiana amendments layered onto it. The code took effect on December 24, 2012, and the rule was readopted in a filing dated June 10, 2024. No Indiana primary source names any other IPC edition for this layer.

The consequences for study are structural. A plumbing code is not a single document that ages uniformly; across the editions after 2006, the model code revised tables, reworked provisions, admitted methods its earlier text had not, and restricted others. A candidate studying from a recent edition is therefore studying three kinds of material at once without knowing it: provisions Indiana shares, provisions Indiana’s base states differently, and provisions that exist only in the later book. Indiana’s amendments then relocate individual requirements a second time. Sound Indiana preparation inverts the usual order — it starts from the 2012 Indiana Plumbing Code as adopted, treats later editions as foreign texts however familiar they feel, and learns the Indiana amendments as part of the code itself rather than as footnotes to a national book.

The tested layer carries a limit this guide states rather than smooths over. Which edition the examination tests is established by the Prov Candidate Information Bulletin for the Indiana Plumbing Examinations, and that bulletin text was not retrievable during the verification work behind this guide. The working basis for preparation is therefore the adopted layer — identical in the record: the 2006 IPC base with the 675 IAC 16-1.4 amendments — because it is the only code layer any Indiana primary source names. But this guide does not present the tested edition as a bulletin-verified fact, and candidates should confirm the references for their particular sitting from the directions issued to them after Commission approval and Prov registration. Any secondary source that states Indiana’s tested edition, examination counts, durations, or pass score as settled facts is claiming a verification the primary record, as retrieved, does not contain.

The examination layer: what the rules publish, and what they do not

The published frame is short enough to quote in substance. The Commission’s rule at 860 IAC 1-3-1.1 provides that the Plumbing Contractor examination shall be multiple choice and that the candidate must obtain a passing score. The statute adds one procedural assurance: the passing grade shall be established and made known to the applicants prior to the date of the examination (Indiana Code 25-28.5-1-16). That is the whole of the numeric story Indiana publishes in the sources read — there is no passing percentage to print, and this guide prints none.

The form of the modern examination is equally clear in one direction. Indiana’s licensing examinations are multiple-choice only. The examination structure that existed before 2009 — with written, drawing, and practical sections — was abolished, and the transitional rule text at 860 IAC 1-3-2(c)–(d) is a record of that change, not a description of the current sitting. There is no drawing section to rehearse and no hands-on practical to prepare equipment for. No primary source read for this guide establishes a separate Business and Law examination for Indiana plumbing contractors either; candidates should not budget study time for a second examination Indiana’s primaries do not describe.

What remains unpublished is a list, and candidates deserve it as a list. The verified record contains no question count and no sitting duration for this examination. It contains no statement of whether the examination is taken with references at hand or without them. It contains no verbatim bulletin reference list, no content outline with topic weights, and no vendor examination fee — the reasons for the fee gap are explained in the next section. These are Prov bulletin facts, and the bulletin was not retrievable in the verification pass. The correct response is not to fill the gaps from secondary material; it is to take those mechanics from the directions Prov issues to approved candidates, which is where Indiana’s system puts them.

One confusion deserves direct treatment because it is widespread. Indiana does operate an examination with a published per-part percentage: the apprenticeship-school practical examination at 860 IAC 2-1-7.1, in which apprenticeship students complete assembly projects in copper, cast iron, and plastic. That instrument belongs to apprenticeship programs. It is not the licensing examination, its standard is not the contractor standard, and any source that offers its percentage as the passing score for Indiana plumbing licensure has merged two different examinations. This guide keeps them apart, and candidates should too.

Fees and the license term: two payees, one biennial clock

Money in this process flows to two different payees, and separating them prevents the commonest budgeting error. To the board, through the Indiana Professional Licensing Agency: an application fee of $50; on passing, an issuance fee of $50 if the license is issued in an odd year or $100 if in an even year; and a renewal fee of $100. Contractor licenses expire on December 31 of every odd year. To the examination service: the fee the service itself assesses, paid directly to it. The Commission’s fee rule at 860 IAC 1-1-2.1 explains the arrangement — its stated contractor examination fee applies only where the Commission administers the examination itself, and Indiana’s examinations are administered by Prov. The rule states no dollar amount for the vendor case, and no verified vendor amount exists in the record behind this guide. Candidates should expect the figure at registration and should not rely on any amount quoted in secondary material.

The odd-year/even-year issuance distinction follows from the biennial term: a license issued in the second year of the cycle runs a shorter distance to the same December 31 expiration, and the fee schedule prices that difference. Renewal itself is uncomplicated by one notable absence — Indiana imposes no continuing-education requirement on plumbers. Nothing in Indiana Code 25-28.5-1, in 860 IAC Article 1, or in 860 IAC Article 2 requires CE hours, and the PLA’s renewal instructions impose none. Indiana also provides no inactive or retired status for this license in the sources read, so the license’s life is binary in a way CE states’ licenses are not: current, or expired at the end of an odd-numbered year.

After a failure: the seven-attempt window

Indiana’s retake rule is generous in count and strict in time. A candidate may attempt the examination seven times in total — the first attempt plus six additional attempts — within two years of the date the examination was first scheduled. Three consequences follow. First, the window is fixed by the first scheduled date, so early, underprepared attempts spend the scarcest resource in the system, which is calendar. Second, when the attempts are exhausted, the path resets entirely: a new application, and retaking the entire examination. Third, the Commission holds a middle power — under Indiana Code 25-28.5-1-17, reexamination after two attempts may be conditioned on additional study or training the Commission prescribes. A candidate’s second failure is therefore not merely a score event; it can change what the Commission requires before the next sitting. The study plan that follows is built with that structure in mind: the first sitting should be treated as the best-prepared one, not as a reconnaissance.

A study plan built on Indiana’s actual structure

First, rebuild the code base. Work from the 2012 Indiana Plumbing Code — the 2006 IPC base with Indiana amendments — and audit any recent-edition habits against it provision by provision. The highest-value study hours in Indiana are the ones spent finding where a newer book has taught the candidate something Indiana never adopted.

Second, learn the amendments as code. The Indiana amendments at 675 IAC 16-1.4 are not an appendix to skim after the model text; they are part of the operative code, and they are the most Indiana-specific material a candidate can study.

Third, master the licensing framework itself. The qualification definitions, the attempt window, the biennial term, and the fee structure in this guide are Commission-and-statute material of exactly the kind a top-tier examination can test — and they are short enough to learn completely.

Fourth, protect the first sitting. With seven attempts inside a two-year window and a Commission power to prescribe study after two failures, the rational plan front-loads preparation: timed, multiple-choice practice under sitting-like conditions, errors sorted by cause — code-base errors, amendment errors, and framework errors cured separately — before the window ever opens.

Fifth, take the sitting’s mechanics from the source that owns them. On approval and registration, read the Prov directions for the sitting itself — references, timing, and examination-day requirements — and let those directions, not secondary summaries, set the final week’s logistics.

Indiana in one view

Indiana in one view is a state that kept its own counsel. It titles its top tier Plumbing Contractor and has no master license to confuse it with. It adopted a plumbing code on a 2006 base, amended that base in its own direction, and readopted the result in 2024. It examines by multiple choice only, having abolished its drawing and practical sections before 2009. It counts a candidate’s years in hours — 6,400 of them, no more than 40 in a week — and gives the candidate seven attempts inside two years to convert them into a license. And it publishes less about its examination than most states do, which is itself a fact a candidate can use: what Indiana has not published, no one else can know, and preparation is soundest when it is built on the adopted code and the Commission’s rules and candid about everything else. The companion program page at /indiana-plumbing-contractor-exam-prep/ carries the program built on exactly that footing.

Frequently asked questions

Does Indiana have a Master Plumber license?

No. The examined tiers are Journeyman Plumber and Plumbing Contractor. The contractor examination is Indiana’s top-tier examination.

What experience does the contractor examination require?

At least four qualifying years by one of three routes: a Commission-approved apprenticeship (at least 576 classroom hours and 6,400 on-the-job hours over at least four years), a notarized statement of four years of experience in the trade, or four years in a plumbing business under a licensed plumbing contractor’s direction. Four years means at least 6,400 hours over at least four years, with no more than 40 hours counted in any week, prior credit capped at 75 percent, and employer affidavits required.

Which code should a candidate study?

The adopted code: the 2012 Indiana Plumbing Code (675 IAC 16-1.4), built on the 2006 IPC, second printing, with Indiana amendments. The tested edition is a Prov bulletin fact that the verification work behind this guide could not retrieve, so the guide anchors on the adopted layer — the only code layer an Indiana primary source names — and does not present a tested edition as settled. Confirm your sitting’s references from the directions issued after approval and registration.

Is there a drawing or practical portion?

No. Current Indiana licensing examinations are multiple-choice only; the pre-2009 written, drawing, and practical sections were abolished. The apprenticeship-school practical is a separate instrument belonging to apprenticeship programs, and its standard is not the licensing standard.

What score passes the contractor examination?

Indiana’s rule requires “a passing score,” and the statute provides that the passing grade shall be established and made known to applicants before the examination date. No numeric passing score appears in any primary source in the verified record, and this guide prints none.

How many questions are on the examination, and how long does it take?

Neither figure is published in the verified record; both rest in the Prov bulletin, which was not retrievable in the verification pass. Take them from the directions issued to you as an approved candidate, and distrust secondary figures.

How much does the examination cost?

The board’s application fee is $50, and issuance on passing is $50 in an odd year or $100 in an even year. The examination fee is assessed by the examination service and paid directly to it; the Commission’s rule states no dollar amount for the vendor case, and this guide prints none.

How many attempts are allowed?

Seven in total, within two years of the date first scheduled. After the attempts are exhausted, a new application is required and the entire examination must be retaken. After two attempts, the Commission may condition reexamination on additional prescribed study or training.

Does renewal require continuing education?

No. Indiana imposes no continuing-education requirement for plumbers, in statute, rule, or renewal instructions. Renewal is $100, and licenses expire December 31 of every odd year.

When does enrollment open for the PassProfessor program?

The program is in the works and enrollment is not yet open. Leave an email address on this page and PassProfessor will write to you when the program is ready — and only about this program.