Illinois Plumber’s License Exam Guide: The Single License, the State-Written Code, and Three Parts That Each Have to Stand

Illinois examines exactly one individual plumbing license: the Illinois Plumber’s License, administered under the Illinois Department of Public Health and graded by the Board of Plumbing Examiners. There is no journeyman class and no master class in Illinois. The examination is a single examination in three parts — a Knowledge Assessment, a Construction Drawings or Plans part, and a hands-on Practical Application Assessment — built on the Illinois Plumbing Code at 77 Ill. Adm. Code Part 890. The PassProfessor Illinois Plumber’s License program prepares candidates for that examination.

This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.

The credential at a glance

ItemVerified position
ProgramIllinois Plumber’s License — the only examined individual plumbing license in Illinois
Examined classesThere is no journeyman class and no master class in Illinois
AuthorityIllinois Department of Public Health (IDPH); the Board of Plumbing Examiners grades the tests
AdministrationState-run — no examination vendor, and no candidate bulletin
CodeThe Illinois Plumbing Code, 77 Ill. Adm. Code Part 890 — state-written; Illinois does not adopt the IPC or the UPC in any edition
Examination structureOne examination in three parts: Knowledge Assessment; Construction Drawings or Plans; Practical Application Assessment
Passing ruleA candidate must score an average of 75 or above AND 61 or above on each part, with parts graded to 100 points
Practical disclosureThe Practical Application Assessment is a genuine hands-on assessment — the candidate brings their own tools and materials, and safety glasses
RetakesNo cap on retakes; after 3 failures the candidate attends a supervision-compliance meeting, and that meeting is not a cap
Companion program page/illinois-plumber-exam-prep/
Administrator notePassProfessor is independent and is not affiliated with the Illinois Department of Public Health

Most state plumbing guides begin with a ladder. This one begins with the absence of one, because Illinois candidates waste real time on a structure that does not exist here. Illinois examines a single individual license. Beneath it, an unexamined apprentice stage; beside it, a business registration renewed annually; above it, nothing examined at all. The guide that follows is organised around the three things that actually decide an Illinois outcome: the state-written code, the three-part examination that tests knowledge, plans, and hands in turn, and a grading rule with a floor beneath each part that makes balanced preparation a mathematical requirement rather than advice.

Reading the verified facts

The facts in this guide come from Illinois primary material as recorded in the research record, and three of them are negatives that carry as much weight as any positive fact. The first negative: no journeyman or master class exists among Illinois examined individual licenses — verified, not assumed. The second: no examination vendor administers this credential and no candidate bulletin governs it, because administration is state-run. The third is a silence this guide preserves rather than fills: the primary record states no mechanics of the kind vendor bulletins usually publish for other states, and this guide prints none of those mechanics — none at all — rather than importing figures from other states’ sittings, which is the single most common way secondary material corrupts Illinois information. What the record does state is stated fully: the authority, the code, the three parts and their forms, the passing rule in its exact points form, the retake position, and the apprentice and contractor arrangements around the license.

Two common corruptions deserve naming at the outset. Material for this credential is often written by adapting a model-code state’s page, and the adaptation leaks: a vendor’s name, a bulletin that does not exist, classes Illinois does not have, a code Illinois does not use. And the passing rule is often rewritten by writers into a form Illinois does not use. This guide states the rule only in its verified points form, everywhere it appears, including this paragraph’s table above and every repetition below. Candidates should adopt the same habit: when a source describes Illinois in another state’s vocabulary, doubt the source, not Illinois.

The route, step by step

Step one — confirm the credential and discard the ladder. The Illinois Plumber’s License is the examined individual credential. If your plan involves passing a journeyman examination first and a master examination later, that plan belongs to another state. In Illinois there is one gate, and this is it.

Step two — note where you stand in the apprentice layer, if you are in it. The apprentice license is the unexamined stage beneath the license: available from age 16, held under a sponsor, with no more than two apprentices per sponsor and a six-year cap on the stage. Apprentices building toward the examination should treat those years as the foundation of the hands-on strand described below, because Illinois will examine that foundation directly.

Step three — apply through the state. Administration runs through the Illinois Department of Public Health, and the Board of Plumbing Examiners grades the tests. There is no vendor portal and no vendor bulletin in this route; follow the department’s own current instructions for application and sitting arrangements, and treat anything describing a testing company’s process for this credential as material about some other state.

Step four — prepare all three strands. Code knowledge for the Knowledge Assessment, plan reading for the Construction Drawings or Plans part, and applied hands-on proficiency for the Practical Application Assessment. The study plan section below sequences these; the essential point at route level is that they are three preparations, not one preparation with two afterthoughts.

Step five — assemble what the hands-on part requires of you. The Practical Application Assessment is performed with the candidate’s own tools and materials, and safety glasses. Arriving properly equipped is part of the examination’s logistics, and it is the candidate’s responsibility: know what you will bring, bring it in working order, and let no part of your hands-on preparation depend on equipment you will not actually have in the room.

Step six — sit the one examination and meet the rule in full. Passing means both conditions together: an average of 75 or above AND 61 or above on each part, with parts graded to 100 points.

Step seven — if the standard is not met, use the open route back deliberately. Retakes carry no cap. After 3 failures, the candidate attends a supervision-compliance meeting, which is a step in the process and not a cap or a bar. Before any further attempt, identify which part fell short and which condition of the rule it failed — the average or the per-part floor — because the remedy differs.

The code: Part 890 and nothing else

The Illinois Plumbing Code, at 77 Ill. Adm. Code Part 890, is the whole code layer of this credential, and this guide gives it a section of its own because candidates persistently underrate what “state-written” means in practice.

It means, first, that Illinois is not an edition of anything. States that adopt a model code argue about editions — which year’s text, with which amendments — and their candidates must solve an edition problem before they can start. Illinois candidates have no edition problem, because there is no model code in the Illinois picture at all: not the International Plumbing Code, not the Uniform Plumbing Code, in any edition. There is Part 890, the code Illinois wrote, which is simultaneously the adopted code governing Illinois work and the tested code the Knowledge Assessment examines.

It means, second, that the text itself must be learned in its own terms. Provisions a candidate knows from model-code work may have Illinois counterparts that are similar, and some that are pointedly different, and the examination grades the Illinois text. The study habit that follows is unglamorous: read Part 890 as the primary document, organise notes by its structure rather than by a model code’s chapter habits, and mark every place where field habit formed elsewhere argues with the Illinois provision — those marked places are where this examination will find you.

It means, third, that authority and code sit in one place. The department that administers the license is the department of the code, and the Board of Plumbing Examiners that grades the tests grades them against that code. Illinois candidates are spared the multi-agency puzzles of some states and given a simpler, stricter task in exchange: one code, learned properly.

Part one in depth: the Knowledge Assessment

The Knowledge Assessment examines the Illinois Plumbing Code in three written forms — true/false, multiple-choice, and fill-in — and each form tests a different depth of knowledge, so preparation should address each deliberately.

True/false items test the candidate’s feel for the code’s exact positions. A statement is presented whole, and a single wrong element — a dimension, a material, a condition quietly dropped — makes it false. These items punish approximate knowledge: the candidate who knows roughly what Part 890 requires will find roughly half of each statement familiar and will guess at the rest. The cure is reading the code as written, with attention to the qualifying words candidates usually skim.

Multiple-choice items test discrimination among plausible provisions. The distractors in a well-built item are rarely nonsense; they are neighbouring provisions, common field practice, or the model-code answer — and in Illinois that last category is the trap with a state’s name on it. The candidate whose knowledge came from model-code material will find one option that matches what they learned elsewhere, and it will be there precisely because it is wrong in Illinois.

Fill-in items test production rather than recognition. No options are provided; the term, figure, or provision must come from the candidate’s own knowledge. This is the form that exposes recognition-based study — the candidate who has only ever picked correct answers out of lists discovers, in a fill-in item, the difference between knowing a provision when they see it and knowing it. Preparation for this form is retrieval practice: closing the book and producing the provision, the term, the figure, until production is as reliable as recognition.

Across all three forms, the subject is constant: the Illinois Plumbing Code. Candidates should expect the full working scope of that code — drainage, waste, and venting; water supply and its protection; fixtures and installation standards; sizing and the code’s tables and figures; and the general provisions that govern how the work is done — examined at the level of a plumber who will hold the state’s single examined license, and who therefore carries the whole standard personally rather than sharing it with a tier above.

Part two in depth: Construction Drawings or Plans

The second part examines the candidate through construction drawings or plans, and it deserves the plainest disclosure in this guide, stated here without softening: a written preparation program cannot rehearse this part for you. Written material can explain how plans communicate — symbols, scales, runs, risers, notes — and the PassProfessor program supports this strand with code and plan knowledge. But the skill the part examines is exercised only in front of actual drawings: reading a system off a plan, tracing what connects to what, noticing what a drawing omits, and connecting the depicted installation to what Part 890 requires of it.

That disclosure is not a counsel of despair; it is a work order. Candidates should build a deliberate plan-reading practice alongside their code study: obtain real plumbing drawings — from their own work wherever possible — and practise the examination’s motions on them. Read a plan and state, aloud or in writing, every system it shows. Trace each run from fixture to stack to building drain. Check the depicted work against the code and list the points where the drawing and the code argue. Work under a self-imposed clock, because fluency, not just accuracy, is what a separate drawings part exists to measure. An apprentice’s daily work is full of plans; the Illinois candidate’s advantage is that their preparation environment and their working environment can be the same room, if they choose to treat every plan at work as a rehearsal.

Candidates should also understand what this part does to the grading risk. Because the passing rule includes a floor beneath each part — 61 or above on each part, as one condition of the rule stated in full in the route section — a candidate strong in code knowledge cannot lend points to a weak drawings performance beyond what the average condition allows. The floor makes plan reading un-optional. Prepare it as a co-equal strand from the first week, not as a final-week addition.

Part three in depth: the Practical Application Assessment

The third part is a genuine hands-on practical assessment: the candidate performs applied plumbing work, with their own tools and materials, and safety glasses. Everything said about the second part’s disclosure applies here with greater force. No written program — including this one — can rehearse hands-on work. Written preparation cannot guide your hands through an assembly, cannot build the muscle memory that neat, correct, code-satisfying work requires, and cannot substitute for the judgement of fit, alignment, and finish that an examiner watches while you work.

What stands behind a strong hands-on performance is, overwhelmingly, real supervised practice — which is why the Illinois structure makes coherent sense as a whole. The apprentice stage beneath this license is unexamined, sponsored, and capped at six years; it exists to produce exactly the applied competence this part then examines. Candidates should prepare for the Practical Application Assessment the way the system assumes they will: by working, deliberately and with feedback, on the kinds of applied tasks the trade consists of, with the code open beside the bench so that every piece of finished practice work is checked against Part 890 as it is completed. The code knowledge from the first strand is not separate from this part; it is the standard your hands are being graded against, and candidates who study code in one room and practise work in another, without carrying each into the other, divide what Illinois examines as one competence.

Logistics are part of preparation here, and they are the candidate’s own: your tools, your materials, your safety glasses. Practise with the kit you will bring. A candidate whose hands know their own tools works at the speed and finish the assessment rewards; a candidate performing with unfamiliar equipment spends examination attention on the tools that should have been free for the work.

The passing rule, and how to prepare against its shape

The rule, once more in its verified form: a candidate must score an average of 75 or above AND 61 or above on each part, with parts graded to 100 points.

Two conditions, two different preparation implications. The average condition measures the whole performance and rewards breadth — a candidate cannot pass on one brilliant part and two indifferent ones, because the average will not carry. The per-part condition measures the weakest performance and rewards balance — a candidate cannot pass with a collapsed part, however strong the rest, because the floor stands under each part separately. Most grading rules in most states are a single line a candidate must cross. Illinois draws two lines, of two different kinds, and an Illinois preparation plan is correctly built only when it can answer, for each of the three parts, the question: is this part safely above its floor, and is the whole safely above its average?

That question gives the candidate a diagnostic discipline to use in practice. Score practice work part by part, never as one blended figure. Watch the lowest part, not the average, in the weeks before the sitting; the lowest part is where Illinois outcomes are decided for candidates whose knowledge is otherwise sufficient. And keep the rule’s exact form in mind when reading anything else about this examination: the rule is a points rule, stated by the state in points, and it should be repeated in points — as this guide repeats it — by anyone describing Illinois accurately.

A study plan in three strands

Strand one — the code, in its three forms. Study Part 890 provision by provision, and rotate the retrieval method as you go: judge statements true or false with the false element named, answer multiple-choice items and state why each wrong option is wrong, and close the book regularly to produce terms and figures in fill-in fashion. Keep a running list of Illinois-versus-elsewhere differences — every point where Part 890 parts company with practice or texts from model-code states — and review that list disproportionately, because it is a map of your personal trap locations.

Strand two — plans, on real paper. On a fixed weekly rhythm, work real drawings: trace systems, list code questions the plan raises, check depicted work against the code, and time the work. Increase difficulty by choosing larger and less familiar plans. Treat plans encountered in daily work as free repetitions and use them.

Strand three — hands, with feedback. Practise applied work with the tools and materials you will bring, with safety glasses worn as a matter of routine, and have finished work checked — by a sponsor, a senior plumber, or your own disciplined review against Part 890 — every time. Slow, checked repetitions build the competence this part grades; unexamined repetitions only build speed at whatever standard you already have.

Integration. In the final phase, rotate the strands inside single weeks and single days, the way the examination itself will present them together. Then, before the sitting, audit the plan against the grading rule part by part: floor first, average second. A candidate who can certify both, from scored practice, is ready in the only sense Illinois recognises.

The errors this examination is built to catch

Preparing for a ladder that does not exist. Candidates who arrive looking for journeyman and master stages have misunderstood the state before they open a book; Illinois will examine them once, at full standard.

Studying a model code. The most expensive Illinois error, because it feels like diligence. Every hour spent mastering a text Illinois does not use is an hour that can actively plant wrong answers for the Knowledge Assessment.

Recognition-only study. Fill-in items exist to find this candidate, and they find them reliably. Produce answers in study, not just selections.

Treating the drawings and hands-on parts as formalities. The per-part floor exists, in practical effect, to catch exactly this distribution of effort. Two of the examination’s three parts cannot be crammed from a book, and the rule ensures they cannot be coasted either.

Expecting a vendor. Candidates who wait for a bulletin, a portal, or a testing company’s instructions for an Illinois process that is state-run lose weeks to a document that is never coming.

After the sitting: the license, and what stands around it

Meeting the passing rule completes the examined step of Illinois licensure, and the Illinois Plumber’s License then stands as the state’s single examined individual credential — the qualification of a plumber Illinois has tested on its own code, its plans, and its work. Around it, the two neighbouring arrangements keep their distinct places: apprentices continue to enter the trade through the sponsored, unexamined apprentice license with its six-year cap, beginning the foundation this examination will one day test; and businesses continue to hold plumbing contractor status as an annual registration, a business-layer standing rather than an examined individual rank. Candidates who keep those three elements — apprentice stage, plumber’s license, contractor registration — in their separate boxes understand the Illinois system the way the state built it, and the companion program page at /illinois-plumber-exam-prep/ carries the shorter presentation of the same verified position, with enrolment notification for the PassProfessor Illinois Plumber’s License program handled there and below.

Frequently asked questions

Does Illinois have journeyman and master plumber examinations?

No. Illinois examines one individual plumbing license, the Illinois Plumber’s License. There is no journeyman class and no master class.

Who administers and who grades the Illinois examination?

The Illinois Department of Public Health is the authority, administration is state-run with no examination vendor, and the Board of Plumbing Examiners grades the tests. There is no vendor candidate bulletin for this credential.

Which code should I study for the Illinois examination?

The Illinois Plumbing Code, 77 Ill. Adm. Code Part 890 — the state-written code that is both the adopted code and the tested code. Illinois does not adopt the IPC or the UPC in any edition, and model-code material is the wrong text for this examination.

What forms of questions does the Knowledge Assessment use?

True/false, multiple-choice, and fill-in questions on the Illinois Plumbing Code. Prepare for all three forms; the fill-in form in particular requires producing terms and figures from knowledge, not recognising them.

How should I prepare for the Construction Drawings or Plans part?

With real drawings, on a regular rhythm: trace systems, connect what plans depict to what Part 890 requires, and work for fluency as well as accuracy. A written program supports this strand but cannot rehearse it.

How should I prepare for the Practical Application Assessment?

With genuine hands-on practice and feedback, using your own tools and materials and wearing safety glasses, checking finished work against Part 890. Bring the tools and materials you have practised with; the candidate supplies them, along with safety glasses.

What is the Illinois passing rule?

A candidate must score an average of 75 or above AND 61 or above on each part, with parts graded to 100 points. Both conditions bind: the average measures the whole performance, and the per-part floor stands under each part separately.

What if I fail one part badly but do well in the others?

The per-part floor is not cured by strength elsewhere. Diagnose which part fell short and which condition of the rule it failed, and rebuild that strand before sitting again.

Is there a limit on retakes?

No cap. After 3 failures the candidate attends a supervision-compliance meeting, and that meeting is not a cap — the route back to the examination remains open.

What is the Illinois apprentice stage?

An unexamined apprentice license, available from age 16 under a sponsor, with no more than two apprentices per sponsor and a six-year cap on the stage.

Is a plumbing contractor in Illinois examined?

No. Plumbing contractor status is an annual registration, not an examination and not an individual license class.

Is PassProfessor affiliated with the Illinois Department of Public Health?

No. PassProfessor is an independent preparation provider. The department alone licenses plumbers and administers the licensing process.

When does enrollment open for the PassProfessor program?

The program is in the works and enrollment is not yet open. Leave an email address on this page and PassProfessor will write to you when the program is ready — and only about this program.