Hawaii Master Plumber Exam Guide: Two Licenses, No Reciprocity, and a Closed-Book Examination on the 2018 UPC

Hawaii’s Master Plumber license — type code PM — is the senior of the two individual plumber licenses the state issues under HRS chapter 448E, examined by PSI for the Board of Electricians and Plumbers. The PassProfessor Hawaii Master Plumber program prepares candidates for that examination: 80 questions in 180 minutes, closed book, minimum passing score 70 percent, tested on the Uniform Plumbing Code, 2018 edition.

This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.

The credential at a glance

ItemVerified position
ProgramHawaii Master Plumber (license type PM), the senior of Hawaii’s two individual plumber licenses under HRS ch. 448E
RegulatorBoard of Electricians and Plumbers, within the Professional and Vocational Licensing Division (PVL), Department of Commerce and Consumer Affairs (DCCA)
Examination vendorPSI Services LLC, contracted by DCCA; Board approval precedes PSI registration
Examination structureA single examination. There is no separate Business and Law portion for PM
Format80 questions / 180 minutes / CLOSED BOOK / computer-administered
Passing standardMinimum Passing Score 70%, as stated in the PSI bulletin examination table
Examination fee$90, per the PSI bulletin; the fee is valid for one year from the date of payment and is not refundable or transferable
Tested referenceUniform Plumbing Code, 2018 edition (IAPMO)
Adopted codeNo single statewide adopted UPC edition is stated: Hawaii’s rules recognise the UPC with amendments as adopted by each county as the minimum standard
Administrator notePassProfessor is independent and is not affiliated with the Board of Electricians and Plumbers or DCCA

Hawaii’s plumbing licensing is a small, exact system: two license types, one board, one examining vendor, one tested code edition, and one firm answer — no — on the question candidates from the mainland ask most often, which is whether their existing license counts for anything here. This guide is organised around the system’s defining conditions: a closed-book examination that tests carried knowledge rather than book-handling; a ladder with exactly one step in it, from PJ to PM; a county-adopted working code that no page should flatten into a statewide edition; and a neighbouring contractor credential whose figures must never be allowed to wander into PM preparation.

Reading the verified facts

Hawaii’s facts arrive in distinct layers, and confusing the layers is the source of most published error about this examination. The statute layer is HRS chapter 448E, the Electricians and Plumbers chapter, administered by the Board of Electricians and Plumbers within the Professional and Vocational Licensing Division of the Department of Commerce and Consumer Affairs. The statute creates the two license types, sets the eligibility standard, and leaves the passing score to the Board’s rules. The rules layer is HAR Title 16, Chapter 80 — cited correctly as Chapter 16-80 — which, among the provisions retrieved, defines equivalent experience and recognises the county-adopted UPC as the minimum standard for plumbing work. The bulletin layer is PSI’s Plumber Examinations — Candidate Information Bulletin, bulletin 10712, copyright 2023 and dated July 21, 2023: a different document from PSI’s Hawaii Contractor bulletin, and the source of the examination’s mechanics — its count, time, book status, outline, fee, and the 70 percent passing figure. That figure is bulletin-layer only: no numeric passing score for PM was retrieved from the statute or the rules, and this guide does not pretend otherwise.

The route, step by step

Step one — hold the PJ standing, or its equivalent. The master applicant must have been registered as a journey worker plumber for at least two years, or hold equivalent experience as the rules define it, documented on completed, notarised Experience Verification forms. Step two — apply to the Board, on the Board’s calendar. A complete application with fees must be received at least seven working days before a Board meeting; the Board usually meets in February, April, June, August, October, and December. An application left without evidence of continued efforts for two consecutive years is deemed abandoned and destroyed. Step three — receive approval and register with PSI. Board approval precedes registration; allow up to 24 hours after the approval letter issues before registering through PSI’s Hawaii trade examination channels. Eligibility runs two years from the approval letter. Step four — sit the examination: 80 questions, 180 minutes, closed book, computer-administered at a test centre or by remote proctoring, after a tutorial of up to 15 minutes that does not count against examination time. Step five — reach the standard: a minimum passing score of 70 percent. Step six — pay the license fees on passing, prorated by triennium year, and receive the PM license. Step seven — hold the cycle: triennial renewal by June 30, with the continued competency obligation described below. There is no reciprocity step anywhere in this route, for any applicant, from any jurisdiction.

The outline in full

The PM outline totals 80 questions across eleven areas. Read it as the examination’s own statement of what a Hawaii master plumber is: a practitioner whose largest single tested block is not a piping system at all, but the excavation, general knowledge, and regulatory framework within which all the systems sit.

Excavation, General Knowledge, and Regulations — 18 questions

Eighteen questions — the largest block in the sitting by a wide margin — examine the ground the trade works in and the rules it works under: excavation practice, the trade’s general knowledge base, and the regulatory framework of chapter 448E and its rules as the outline presents it. For a closed-book candidate this block is decisive. It cannot be answered from a sizing table; it tests whether the candidate has internalised how Hawaii structures the trade — its licenses, its standards, its jobsite obligations — as knowledge, not as a chapter to be located.

Drain, Waste and Vent Systems, including Pipe Sizing — 10 questions

Ten questions examine drainage, waste, and venting with the sizing inside the system rather than separated from it: the candidate must size as they reason, applying the UPC 2018’s drainage and vent provisions from memory. In a closed-book sitting, the venting rules and sizing logic of this area are pure carried knowledge — the provisions most worth over-learning, because no table will be open to rescue a half-remembered rule.

Water Supply and Distribution, including Pipe Sizing — 10 questions

Water supply matches drainage at ten questions, again with pipe sizing embedded: distribution design, supply sizing, and the UPC’s water provisions tested as working knowledge. Together the two great systems account for 20 of the 80 questions, a quarter of the sitting, and they reward the candidate who has rehearsed the sizing reasoning until it runs without the book.

Fixtures and Water Heaters — 10 questions

Ten questions cover fixtures and the water heaters that serve them: fixture requirements, installation provisions, and the safety framework for water heating equipment under the UPC 2018. The block’s weight equals each of the great systems — a reminder that the master examination tests breadth across the whole installation, not depth in two systems alone.

Isometrics — 6 questions

Six questions test isometric reading: the interpretation of isometric drawings of plumbing systems, examined as written questions within a computer-administered examination. The bulletin of record describes the PJ and PM examinations as computer-administered question examinations, and no practical or hands-on component is described in it. This guide states exactly that and no more — it does not assert, as a verified fact, anything about components beyond the bulletin’s own description.

Sewer — 6 questions

Six questions examine building sewers and the work beyond the building line: sewer sizing, installation, and the provisions governing the connection between building drainage and the public or private disposal side. A self-contained block.

Backflow Prevention — 5 questions

Five questions examine the protection of the potable supply: backflow principles, devices, and the UPC provisions governing where protection is required. The block is compact and exact, and its content — cross-connection control — is among the most rule-dense material in the code, well suited to a closed-book test of carried provisions.

Fuel Gas Systems, including Pipe Sizing — 5 questions

Five questions examine fuel gas through the Uniform Plumbing Code 2018, with pipe sizing again embedded. The discipline here is the reference list: the PM bulletin does not list the International Fuel Gas Code, and gas content keys to the UPC and this outline area. Material prepared from a fuel gas code — including material prepared for a different Hawaii credential whose examination does use such a reference — teaches the wrong book for this block.

Plumbing Math — 4 questions

Four questions of examined arithmetic stand as their own area, in addition to the sizing embedded in the systems blocks: the calculations of the trade, performed from knowledge, without references. The bulletin lists Mathematics for Plumbers and Pipefitters, 8th edition, 2013, among the PM references, but in a closed-book room the arithmetic itself must be carried in.

Storm and Roof Drainage — 3 questions

Three questions examine storm water and roof drainage under the UPC: sizing against rainfall and the separation of storm systems from sanitary drainage. The smallest system block, and a complete one — three questions that cannot be answered from the drainage block’s material alone.

Safety OSHA — 3 questions

Three questions examine occupational safety from 29 CFR Part 1926, listed in the bulletin in its latest available amendments or in PSI’s Selections version. Safety is the outline’s smallest block and its most portable: the provisions are federal, the questions are applied, and the candidate who treats three questions as negligible has misread how a 70 percent line is crossed.

The two credentials Hawaii candidates confuse

The C-37 Plumbing Contractor license is issued under HRS chapter 444 by the Contractors License Board. The Master Plumber license is issued under HRS chapter 448E by the Board of Electricians and Plumbers. They are different credentials, under different statutes, through different boards, by different examinations — and the secondary literature mixes them freely, because both can fairly be described in plain English as Hawaii plumbing licenses held by experienced plumbers. The mixing is not harmless. The contractor examination carries its own passing standard and its own reference list, and figures belonging to it — including a passing score that is not 70 percent and a fuel gas code reference the PM bulletin does not list — appear in search results and preparation material as though they described the PM sitting. This guide’s rule is absolute: no figure from the contractor examination appears anywhere in PM preparation, in either direction. A candidate preparing for the PM should treat every unsourced “Hawaii plumbing exam” figure as suspect until it is traced to the plumber bulletin, number 10712.

Eligibility in depth

HRS section 448E-5 states the master standard twice over, for the license and its renewal of standing: the applicant shall have been registered with the Board as a journey worker plumber for at least two years, or shall have equivalent experience in the trade. The application layer phrases the registration route as licensed journey worker registration in this or another state for at least two years, and HAR section 16-80-3 supplies the definition that makes the second route workable: equivalent experience means licensure as a journey worker plumber or master plumber in another county, state, or country whose licensing requirements are substantially equivalent to Hawaii’s. Three consequences follow, and candidates should hold all three. First, the two-year requirement is a registration requirement, not merely an experience claim — time in the trade that was never registered at the journey worker level must be argued through the equivalence definition, not simply counted. Second, equivalence is a route to sitting, not a route around the examination: it qualifies an applicant to be examined, and the examination follows. Third, documentation is formal — completed, notarised Experience Verification forms — and an application assembled casually will stall at the Board’s meeting calendar, where a missed seven-working-day deadline costs the applicant a full meeting cycle.

Reciprocity deserves its own paragraph because it is the point on which mainland candidates most reliably waste money and seasons. Hawaii does not reciprocate with any jurisdiction. The application material says so; the Division’s published answers say so; no reciprocal agreement exists to be found. The substantial-equivalence definition above is sometimes mistaken for reciprocity — it is not. Reciprocity would recognise the out-of-state license itself. Hawaii recognises, at most, the experience behind it, and then examines the applicant like everyone else. The only endorsement provisions in the sources concern nonresident military spouses under HRS sections 436B-14.6 and 436B-14.7 — a narrow statutory channel for a defined population, not a general door, and not one this guide expands beyond its terms.

The sitting itself

The examination is computer-administered, at a test centre or through remote proctoring, and its delivery mechanics reward a candidate who has read the bulletin as carefully as the code. The tutorial — up to 15 minutes — does not count against the 180 minutes. Questions are presented one at a time; answers may be revisited and changed while time remains. Up to ten experimental questions may be administered among the scored questions; they are unscored, and their time is not counted against examination time — a candidate who meets an unfamiliar question should consider that it may be one of these, answer it as well as the code allows, and move on. Rescheduling or cancelling without forfeiting the fee requires notice received two days before the scheduled date, and neither voicemail nor email is an acceptable cancellation; a missed appointment, a late cancellation, a late check-in, or improper identification forfeits the fee. After a failure, no new appointment may be made the same day; retesting may be possible within two business days depending on space. No attempt cap is printed — the practical boundary is the two-year eligibility window from the approval letter, within which the candidate may test without a stated limit. The examination fee of $90 is valid for one year from the date of payment and is not refundable or transferable; whether each retest requires a new payment is not stated in the bulletin, and this guide states nothing either way — a candidate planning multiple attempts should confirm the position with PSI directly.

Staying licensed: the triennial cycle and continued competency

The PM license renews triennially, by June 30, in the cycle of years running 2027, 2030, 2033. The renewal fee position at the current Board-page layer is $306 for an active license and $12 for an inactive one, with restoration within one year after expiration at $406 active and $112 inactive; a dishonoured-payment service charge of $25 appears in the application packet. Renewal’s substantive obligation is continued competency under HRS section 448E-8.5(b): before each renewal, the licensee must either furnish proof of attendance at an educational course related to current updates of the UPC, conducted or approved by the community colleges, or pass a Board-prescribed examination on current UPC updates. Two fences guard this obligation in the sources, and this guide observes both. No hour count is stated in any primary source read — published hour figures for the requirement are vendor claims, and none is printed here. And the UPC edition required for the June 30, 2027 renewal is conflicted in the sources — the Division’s continued competency material points to one edition and a community college course listing for the same deadline points to another — so this guide names no single required edition. What can be said structurally is the point that matters for study design: the licensing examination stays keyed to the UPC 2018 while the renewal obligation tracks current updates, so the Hawaii master plumber’s code knowledge has two clocks running on it permanently — the fixed book of the examination behind them, and the moving code of the work in front of them.

A study plan built for a closed-book sitting

First, accept the format as the method. Closed book means the code must be memorised as a working system, not consulted as a library. Study in retrieval mode from the first week: read a provision, close the book, state it, apply it, check it. Second, weight by the outline. The 18-question regulations and general knowledge block comes first — it is the largest and the least like daily work for many candidates. The two 10-question systems with their embedded sizing follow, then fixtures and water heaters. Third, drill sizing as arithmetic, not as tables. In the room there are no tables; the candidate must carry the sizing logic and the numbers it produces. Work sizing problems until the reasoning is automatic. Fourth, learn fuel gas from the UPC and only the UPC, resisting every fuel gas code source, however authoritative it looks — it belongs to a different examination. Fifth, rehearse the sitting itself: 80 questions, 180 minutes, no book, one question at a time, with a planned second pass for changed answers. Sixth, close with the Hawaii framework — the two license types, the two-year registration standard, the equivalence definition, the absence of reciprocity, the Board-meeting calendar, the triennial cycle — because 18 questions of the sitting examine the framework itself.

The errors this examination is built to catch

Preparing as though the book were open. The most expensive error available in Hawaii: study habits built for open-book states produce recognition, and this sitting examines recall. Importing the contractor examination. Its passing standard and its fuel gas reference belong to the C-37 under chapter 444; a PM candidate who learns either has been miseducated by the secondary literature’s habit of merging the credentials. Assuming reciprocity. There is none, from anywhere. Answering fuel gas from the wrong code. The PM list contains no fuel gas code; the UPC governs the block. Treating the small blocks as negligible. At a 70 percent line on 80 questions, the three-question blocks — storm drainage, OSHA safety — are exactly the margin between 69 and 71. Missing the Board’s calendar. The seven-working-day deadline and the two-month meeting rhythm punish late paperwork with months, not days. Trusting a fixed hour count or a single edition for continued competency. Both are unsettled in the sources; the Division, not a vendor, is the authority for the current renewal position.

Hawaii in one view

Hawaii in one view is a licensing system of unusual clarity about its own boundaries. Two licenses, PJ and PM, under one chapter. One examining vendor and one bulletin for both. One tested code edition — the UPC 2018 — held fixed while the working code moves by county adoption and amendment beneath it. One senior examination that is closed book when so many of its mainland counterparts are open, pitched at the whole scope of the trade and weighted toward the regulatory framework that holds the trade together. And one unqualified answer on recognition from elsewhere: no reciprocity, for anyone. The candidate who internalises those boundaries — who prepares for recall rather than reference, learns gas from the UPC rather than from a fuel gas code, keeps the contractor credential’s figures out of the master plumber’s preparation, and files on the Board’s calendar rather than their own — is preparing for the examination Hawaii actually gives. The PassProfessor Hawaii Master Plumber program, described on the companion Hawaii Master Plumber Exam Preparation page, is built to that design, and it is in the works as our catalog continues to expand into the plumbing trades: enrollment is not yet open, and the notify form on this page is the way to hear when it is.

Frequently asked questions

Which PSI bulletin governs the Hawaii Master Plumber examination?

PSI’s Plumber Examinations — Candidate Information Bulletin, bulletin 10712, dated July 21, 2023. It is a different document from PSI’s Hawaii Contractor bulletin. If PSI republishes the plumber bulletin, the mechanics must be re-verified.

Why do some sources give a different passing score for a Hawaii plumbing examination?

Because they are describing a different examination. The C-37 Plumbing Contractor examination, under HRS chapter 444, carries its own passing standard. The PM examination’s bulletin states a Minimum Passing Score of 70%. Figures must be traced to the credential they belong to.

Is the PM examination really closed book?

Yes. The bulletin table states CLOSED BOOK for the PM examination: 80 questions, 180 minutes, no references in the room.

Are the PJ and PM examinations based on the same code?

Yes. Both are tested on the Uniform Plumbing Code, 2018 edition, with identical reference lists. The scope wording tested is the same for both licenses; the PM is the senior credential, reached through the two-year journey worker registration standard.

Is there a hands-on practical in the PM examination?

No practical or hands-on component is described in the bulletin of record, which describes the PJ and PM examinations as computer-administered question examinations; Isometrics is a written content area of six questions. This guide states the position in those terms and asserts nothing beyond the bulletin’s description.

What are the ten experimental questions?

Up to ten unscored questions may be administered alongside the scored 80. They do not count toward the result, and their time is not counted against examination time.

How many times may a candidate attempt the PM examination?

No attempt cap is printed in the bulletin. Attempts are bounded by the two-year eligibility window from the Board’s approval letter, within which the candidate can test without a stated limit. No new appointment may be made on the same day as an examination taken, and retesting may be possible within two business days depending on space.

Does licensure in another state shorten the Hawaii route?

Only through the equivalent-experience definition: licensure as a journey worker or master plumber in another county, state, or country whose requirements are substantially equivalent to Hawaii’s may qualify an applicant to sit. It never waives the examination. Hawaii has no reciprocity with any jurisdiction.

What fees does the PM route carry?

The PSI examination fee is $90, valid for one year from payment, not refundable or transferable. The Division application fee is $40, non-refundable. License fees on passing are prorated by triennium year — $306, $204, or $102 — and triennial renewal stands at $306 active and $12 inactive at the current Board-page layer. Division amounts rest on the application form and Board pages; confirm current amounts with the Division when applying.

What continuing competency does the June 30, 2027 renewal require?

Attendance at an educational course related to current UPC updates, conducted or approved by the community colleges, or a pass on a Board-prescribed examination on current UPC updates. No hour count is stated in the primary sources, and the sources conflict on the single UPC edition required for the 2027 cycle, so neither is stated as a fixed figure here.

Can a candidate bring the UPC into the examination?

No. The examination is closed book. The UPC 2018 is the tested reference in the sense that the questions are keyed to it; it is studied before the sitting, not consulted during it.

Is PassProfessor affiliated with the Board of Electricians and Plumbers or PSI?

No. PassProfessor is an independent preparation provider, not affiliated with the Board, the Professional and Vocational Licensing Division, the Department of Commerce and Consumer Affairs, or PSI. The Board alone approves applicants and issues licenses.

When does enrollment open for the PassProfessor program?

The program is in the works and enrollment is not yet open. Leave an email address on this page and PassProfessor will write to you when the program is ready — and only about this program.