Florida Certified Plumbing Contractor (CFC) Exam Guide: Two Sessions, 160 Points, and the Drawings That Decide the Morning

Florida’s statewide plumbing credential is the Certified Plumbing Contractor (CFC), issued under the Construction Industry Licensing Board. Its trade examination, Plumbing General Trade Knowledge, is a one-day, paper-and-pencil sitting in Orlando scored out of 160 points, and passing takes 112 of 160 points (70%). The PassProfessor Florida Certified Plumbing Contractor (CFC) program, described at /florida-master-plumber-exam-prep/, prepares candidates for the written portion of that examination.

This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.

The credential at a glance

ItemVerified position
ProgramFlorida Certified Plumbing Contractor (CFC): the Plumbing General Trade Knowledge examination, plus a separate Business and Finance examination required for certification
RegulatorConstruction Industry Licensing Board (CILB), Department of Business and Professional Regulation (DBPR)
Trade examination vendorProfessional Testing, Inc. (PTI); candidates apply through floridaexam.com
SittingOne day, Orlando only, paper-and-pencil; Wednesdays in February, April, June, August, October, and December; scheduling deadline 30 days before the date
SessionsMorning, four and a half hours, report 7:00 AM: isometric drawings. Afternoon, four and a half hours, report 1:00 PM: multiple-choice questions
Score160 points: 110 multiple-choice questions at one point each + 5 isometric drawings at up to 10 points each (50 points, 31.25%)
Passing standard112 of 160 points (70%)
Code edition2023 Florida Building Code — Plumbing (2021 International Plumbing Code base); tested edition and adopted edition are the same
Administrator notePassProfessor is independent and is not affiliated with the Construction Industry Licensing Board or DBPR

Florida’s examination rewards a candidate who reads it as two examinations sharing a day and a score. The afternoon is a conventional, if long, open-book multiple-choice paper. The morning is a drawing examination graded by working contractors against published criteria. They draw on the same body of knowledge — drainage, venting, water distribution, gas, and the rest of the published content areas — but they test it in different forms, they fail candidates in different ways, and they demand different kinds of preparation. This guide treats them separately before it treats them together.

First, the disclosure this examination requires

The isometric drawings are worth 50 of 160 points. The multiple-choice session can contribute at most 110 points. Passing takes 112 of 160 points (70%). The arithmetic is unforgiving and every candidate should do it before registering: a candidate who earns nothing in the morning cannot pass, even with a perfect afternoon. A candidate who earns half the drawing points — 25 — still needs 87 of the 110 multiple-choice points, a demanding afternoon by any measure. The drawings are where this examination is won or lost for most candidates, precisely because they are the part of the sitting that trade experience alone does not rehearse: experienced plumbers read drawings daily, but producing a graded isometric, to criteria, on paper, under a clock, is a distinct performance.

PassProfessor’s position is stated without qualification. This is a written practice program. It covers the written portion of the examination — the code knowledge, the sizing and venting reasoning, the system content the afternoon examines and the morning draws on. It does not and cannot rehearse the drawing performance itself, and it makes no promise of full-examination coverage. A complete preparation plan pairs written study with sustained, timed drawing practice conducted outside this program. Any preparation offer for this credential that stays silent about the morning session is leaving out 31.25% of the score.

The route to certification, in order

Step one — qualify. The applicant must be at least 18 years old and of good moral character, and must fit one of the statutory routes: a baccalaureate degree in engineering, architecture, or building construction plus one year of proven experience; at least four years of active experience as a skilled worker or foreman, at least one of them as a foreman; or one of the combination routes that trade college credits against worker and foreman years in the proportions the statute sets out. Florida counts 2,000 person-hours as one full-time year.

Step two — register for the trade examination through Professional Testing, Inc., observing the deadline 30 days before the chosen Wednesday, and assemble a compliant set of reference books (the rules are detailed below; they are enforced).

Step three — sit both sessions in Orlando and reach the standard: 112 of 160 points (70%) across the combined score.

Step four — pass the second examination. Certification also requires the Business and Finance examination, a separate computer-based sitting delivered through Pearson VUE: 120 questions, six and a half hours, a 70% passing standard. It is a separate registration and a separate subject family; this guide records its structure because the route is incomplete without it, and builds no content for it.

Step five — complete issuance. After the examinations, certification requires the initial steps the Board prescribes, including proof of insurance, a financial statement and credit report, and business-organization and qualifying-agent information. Financial responsibility runs deeper than a form: applicants file proof covering workers’ compensation, public liability, and property damage insurance in Board-set amounts, and under Board rule a credit score of 660 or higher establishes financial stability, while a score below that mark may be answered with a 14-hour board-approved financial responsibility course. Initial applicants also undergo a statewide criminal-history check and submit fingerprints for national processing at their own expense.

Two qualifications belong in the route itself. A graduate with a baccalaureate in building construction and a grade point average of 3.0 or higher is exempt from the trade portion only; the Business and Finance examination remains required. And a certificate of competency is not transferable: it belongs to the person who earned it. Certification by endorsement exists for out-of-state contractors, through a substantially equivalent examination, reciprocity, or ten years of out-of-state licensure.

The morning session: how the drawings are graded

Each of the five isometric drawings is graded independently by three licensed plumbing contractor subject-matter experts, against eight criteria. The criteria and their weights repay study, because they tell the candidate what a drawing is for. Orientation carries 20 of the criterion points, and Piping carries 20: the drawing must present the system in the correct spatial relationship and show the piping correctly. Vents carry 16 — the single most instructive figure in the set, since venting is where quick drawings most often go thin. Flow carries 12, and Fixtures carry 12. Legibility carries 8 and Angles carry 8: a drawing the graders cannot read, or whose angles misstate the runs, loses ground before its content is judged. Labeling carries 4. Criterion points are summed and then converted to the drawing’s score on the ten-point scale, and at least two of the three graders must agree that a criterion is met.

One drafting duty is stated in the examination material itself: P-traps must be shown where they are not integral to the fixture, and on the examination candidates add P-traps to water closets and urinals unless the drawing states the trap is integral. It is a small instruction with a clear moral — the graded drawing is a communication to an inspector-grade reader, and omissions that field habit papers over are exactly what the criteria catch. Candidates preparing for the morning should practice producing complete, legible, labeled isometrics of drainage and vent systems under time, and should grade their own practice sheets against the eight criteria rather than against a general sense of looking right.

The afternoon session: the multiple-choice paper

The afternoon carries 110 multiple-choice questions across two published session blocks — the examination’s session split places 45 questions alongside the morning and 65 in the afternoon block of the content information — each question offering four alternatives and worth one point. Basic mathematics is required. There is no penalty for guessing, so an unanswered question is a point surrendered for no reason. Unscored pilot questions may be embedded without identification, with extra time provided for them; candidates should not let an unfamiliar question consume the session, because it may not count at all.

The published content weights describe where the afternoon’s points live. Drainage systems: 20%. Water distribution systems: 20%. Natural gas piping systems: 15%. Industrial piping systems, including sewage disposal and on-site treatment content: 10%. Swimming pools, wells, and irrigation: 5%. Solar systems: 5%. Fire protection systems: 5%. Each weight carries a stated tolerance of plus or minus three percent, so the weights are a guide to emphasis rather than a promise of exact counts. One further area completes the blueprint:

Medical gas systems are within the Certified Plumbing Contractor’s scope, medical gas piping systems carry 20% of the trade examination, and a contractor performing medical gas work must, at least once while licensed, complete a board-approved course of at least six hours on the current national medical gas standard and brazing.

The content areas are entirely technical systems. The published blueprint carries no separate law domain for the trade examination, and candidates should be wary of preparation that invents one.

The reference books: an open-book sitting with closed rules

The examination is open book, and the conditions are strict enough that they deserve a section of their own. Only references on the DBPR Examination Reference List are permitted, one copy of each, and books must remain as published. Underlining and highlighting are allowed. Tabs must be permanently attached; removable tabs are rejected at the door. No handwritten or typewritten notes may appear anywhere in a book — handwriting a candidate finds in a purchased used copy must be blackened out — and marking in a reference book during the examination is treated as a felony under Florida law. Books may not be shared or exchanged. The working kit is equally specified: a scale ruler; a non-printing, silent, handheld calculator with no alpha keyboard and no memory cards; No. 2 pencils; and, where needed, one word-for-word translation dictionary.

The reference list for the current cycle is built on the 2023 Florida books: the 2023 Florida Building Code — Plumbing; the 2023 residential and mechanical volumes; the accessibility volume; the fuel gas volume as listed; the specified chapters and annexes of the national medical gas standard in its listed edition; the state on-site sewage rule chapter; a standard plumber’s mathematics text; a standard plumber’s handbook; a solar thermal manual; the federal construction safety regulations; and a listed standpipe standard. Candidates should verify their set against the live DBPR Examination Reference List before the sitting, because the list, not habit, governs what crosses the threshold of the room.

The code question: one edition, stated plainly

Some states examine on one edition and enforce another. Florida, at the cycle these sources cover, does not. The Florida Building Code is the statewide code and supersedes all other state and local building codes, and its 8th Edition (2023) — the Florida Building Code — Plumbing built on the 2021 International Plumbing Code — took effect December 31, 2023. That is the adopted edition, and it is also the tested edition. The practical consequence is a discipline rather than a complication: study the Florida book, with its Florida amendments, rather than the unamended national code. A provision remembered from the national base text may not survive in the Florida volume, and the examination keys to the Florida volume. Candidates whose field experience runs under local habits formed before the current edition should be especially careful: the sitting tests the book as published, not the practice as remembered.

Certification is not registration

Florida runs two routes into plumbing contracting, and confusing them wastes candidacies. The certified contractor — this credential — holds a state certificate of competency, earned on the state examination, and may contract in any jurisdiction in the state without meeting that jurisdiction’s own competency requirements; the scope is unlimited within the plumbing trade. The registered contractor is registered under a local government’s competency requirements, on the basis of a local competency examination, and may contract only in the jurisdictions where registered. Registration is a legitimate local route; it is not a step toward certification, it does not rest on the state sitting, and study for one examination is not study for the other. There is likewise no statewide journeyman credential in Florida — journeyman certificates are issued at county and city level — so the ladder language candidates bring from other states does not map onto Florida’s structure. The CFC stands at the top of the state’s own arrangement, and it stands alone.

After the sitting: validity, retakes, renewal

A passing grade remains valid for four years from Board approval of the successful-candidate list, and candidates have four years from the first sitting to pass all portions, with unlimited retakes available inside that window. That is a generous structure, and it changes how a near miss should be read: a failed sitting inside the window is information about where the points were lost — morning or afternoon, system by system — and the retake plan should follow the point losses rather than a general resolve to study more.

Certification renews every two years. Renewal requires at least 14 classroom hours of continuing education in each cycle, each hour at least 50 minutes, including one hour of laws and rules, the Board-required portions addressing workers’ compensation, business practices, and workplace safety, and advanced-module hours in the Florida Building Code for the contractor’s discipline. The credential, in other words, keeps its holder current with the very code the examination tested — a sensible symmetry in a state where one statewide book governs the work.

A study plan built around two sessions

Phase one — the code base. Work the 2023 Florida Building Code — Plumbing as the primary text, area by area in the published weight order: drainage and water distribution first, as the joint largest areas, then natural gas piping, then industrial piping. Read the Florida volume itself, noting where it departs from the national base text, because those departures are examinable and field habit conceals them.

Phase two — the drawing discipline, started early and kept parallel. From the first weeks, set regular timed drawing practice: complete isometrics, graded afterward against the eight published criteria — orientation, piping, vents, flow, fixtures, legibility, angles, labeling. Track criterion losses the way the graders count them. Remember the trap instruction. This phase sits outside the PassProfessor written program by design; the program states that boundary openly rather than pretend a question bank can hold a pencil.

Phase three — the remaining systems and the reference set. Cover pools, wells and irrigation, solar, and fire protection at their published weights, and prepare the physical books in parallel: correct editions, compliant tabs, handwriting blackened out, one copy of each listed reference. A candidate whose books are rejected has failed an administrative examination before the trade one begins.

Phase four — combined rehearsal. Sit full-length timed practice under the day’s real shape: a morning of drawing, an afternoon of questions, books as they will be in the room. Score practice in points, against 112 of 160, and let the points — not a percentage of questions answered in an evening — judge readiness.

The errors this examination is built to catch

Treating the morning as a warm-up. Fifty points sit in the drawings; a preparation plan that allocates time by session count rather than by points will underprepare the decisive session. Assuming the afternoon can carry the day. It cannot, arithmetically: 110 available points against a 112-point standard. Studying the national code instead of the Florida book. The examination keys to the 2023 Florida Building Code — Plumbing; base-text answers that Florida amended are wrong answers here. Arriving with non-compliant books. Removable tabs, notes in margins, a shared volume — each is a preventable failure that has nothing to do with plumbing knowledge. Leaving questions blank. With no guessing penalty, a blank is the only answer guaranteed to earn nothing. Confusing the routes. Preparing for certification with registered-contractor material, or expecting a county journeyman certificate to stand as a rung toward the CFC, misreads Florida’s structure. Reading a pass in one examination as certification. The trade sitting and the Business and Finance examination are both required; the route ends at issuance, not at the Orlando score report.

Florida in one view

Florida’s arrangement is unusually legible once its pieces are separated. One statewide credential, with unlimited plumbing scope, issued by one board under one statute. One trade examination, given on paper in one city, scored in points across two unlike sessions — drawings in the morning that no written program can rehearse and that no candidate can afford to score zero on, and an open-book multiple-choice paper in the afternoon that tests the Florida code as published, under reference rules strict enough to fail the careless before the first question. One code edition that is simultaneously the tested book and the enforced book. And a second, separate examination standing between a passing trade score and the certificate itself. The candidate who holds those separations clearly — certified against registered, morning against afternoon, points against percentages, trade against business — has already mastered the structure the examination assumes, and can spend preparation where the points actually are.

Frequently asked questions

What credential does this guide cover?

The Florida Certified Plumbing Contractor (CFC) — the statewide credential issued under the Construction Industry Licensing Board. The examination at its center is Plumbing General Trade Knowledge.

How is the examination scored, exactly?

160 points in total: 110 multiple-choice questions at one point each, plus five isometric drawings worth up to ten points each, totaling 50 points or 31.25%. Passing takes 112 of 160 points (70%).

Why do the drawings matter so much?

Because of the arithmetic. The multiple-choice session offers at most 110 points and the standard is 112 of 160 points (70%), so passing with zero isometric points is mathematically impossible. The drawings are also graded against eight published criteria by three licensed contractor graders per drawing.

What are the eight grading criteria for a drawing?

Legibility, Orientation, Flow, Angles, Piping, Labeling, Vents, and Fixtures. Orientation and Piping carry the most criterion weight; Vents are next. Criterion results are converted to the drawing’s ten-point score, and at least two of three graders must agree a criterion is met.

When and where is the examination held?

Wednesdays in February, April, June, August, October, and December, in Orlando only, on paper. The scheduling deadline is 30 days before the date. Drawings in the morning (report 7:00 AM), multiple-choice in the afternoon (report 1:00 PM); each session runs four and a half hours.

Is it open book?

Yes, under strict conditions: only DBPR-listed references, one copy each, as published; permanent tabs only; no notes in books; handwriting must be blackened out; marking in a book during the examination is treated as a felony; no sharing of books.

Which code should candidates study?

The 2023 Florida Building Code — Plumbing, built on the 2021 International Plumbing Code. It is both the tested edition and the adopted statewide edition, so the Florida volume — not the unamended national code — is the study text.

What is the Business and Finance examination?

A separate required examination for certification: computer-based, through Pearson VUE, 120 questions, six and a half hours, 70% to pass. It is distinct from the trade examination in sitting, subject, and delivery.

Who is eligible to apply for certification?

Applicants at least 18 years old and of good moral character who meet a statutory route — degree plus experience, four years of active experience with at least one as foreman, or a listed combination of credits and worker/foreman years. One partial exemption exists: a building construction graduate with a grade point average of 3.0 or higher is exempt from the trade portion only.

How long are scores valid, and how often can a candidate retake?

A passing grade is valid four years; candidates have four years from the first sitting to pass all portions, with unlimited retakes in that window.

How does renewal work?

Every two years, with at least 14 classroom hours of continuing education per cycle, including one hour of laws and rules and the Board-required subject portions.

Does the PassProfessor program cover the drawing session?

No. The program covers the written portion of the examination. The drawing session — 50 of 160 points — requires hands-on drawing practice outside the program, and this guide states that boundary rather than promise coverage a written program cannot deliver. The program page is at /florida-master-plumber-exam-prep/.

Is PassProfessor affiliated with the Board or DBPR?

No. PassProfessor is an independent preparation provider, not affiliated with the Construction Industry Licensing Board or the Department of Business and Professional Regulation. The Board alone certifies.

When does enrollment open?

The program is in the works and enrollment is not yet open. Leave an email address on this page and PassProfessor will write to you when the program is ready — and only about this program.