Delaware licenses plumbers at a single level: the Master Plumber license, issued by examination through the Board of Plumbing, Heating, Ventilation, Air Conditioning and Refrigeration Examiners in the Division of Professional Regulation. There is no Delaware journeyman license. The PassProfessor Delaware Master Plumber program prepares candidates for the single Prov examination — 100 questions in 180 minutes, open book, 70 percent to pass — tested on the 2018 International Plumbing Code and the 2018 International Fuel Gas Code.
This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.
The credential at a glance
| Item | Verified position |
|---|---|
| Program | Delaware Master Plumber: the single examined plumbing license in Delaware |
| Regulator | Board of Plumbing, Heating, Ventilation, Air Conditioning and Refrigeration Examiners, within the Division of Professional Regulation (DPR), under 24 Del.C. ch. 18 and 24 DE Admin. Code 1800 |
| Examination vendor | Prov, Inc. (ProV), under contract with the Board; Board approval precedes Prov registration |
| Examination structure | A single examination. There is no separate Business and Law portion and no Business and Law content area |
| Format | 100 questions / 180 minutes / open book / computer-based |
| Passing standard | 70% to pass, as stated in the Prov Candidate Information Bulletin header |
| Examination fee | $100.00, paid to Prov at registration (bulletin layer) |
| Tested references | International Plumbing Code 2018 and International Fuel Gas Code 2018, both open-book references |
| Adopted code | 2021 State of Delaware Plumbing Code (2021 IPC with Delaware amendments) — one edition ahead of the tested edition |
| Administrator note | PassProfessor is independent and is not affiliated with the Board or the Division of Professional Regulation |
Delaware is the simplest licensing structure in the plumbing catalog and, for exactly that reason, one of the easiest to prepare for badly. There is one board framework, one license, one examination, and two code books on the desk. But the simplicity hides two traps that this guide returns to repeatedly: an outdated two-part examination description still circulating in secondary material, and a tested code edition that sits one edition behind the code Delaware has actually adopted. A candidate who clears both traps and studies to the Prov outline is studying the real examination. A candidate who falls into either one is studying a sitting that does not exist, in a code book the examiners are not using.
Reading the verified facts
The facts in this guide are layered, and the layer is part of the fact. The statute layer — 24 Del.C. chapter 18 — creates the Board of Plumbing, Heating, Ventilation, Air Conditioning and Refrigeration Examiners within the Division of Professional Regulation, sets the eligibility routes and standing bars, addresses reciprocity, and states a cost-based fee principle without printing dollar amounts. The regulation layer — 24 DE Admin. Code 1800 — carries the Board’s operating rules, including continuing education and the regulation statement of the retake rules. The bulletin layer — Prov’s Candidate Information Bulletin, document DE CIB 2026.10.31, Version 1.0, effective October 31, 2026 — carries the examination’s mechanics: its count, its time, its book status, its fee, its outline, and the 70 percent passing standard. Where a number lives in only one layer, this guide says which one. The 70 percent figure, for example, is a bulletin-layer standard: the Board’s regulations state no numeric passing score for plumbing, and the 70 percent figure that appears elsewhere in those regulations belongs to HVACR, not to this license. Candidates should hold the figure confidently — it is the standard Prov applies — while understanding that it is the bulletin, not the regulation, that supplies it.
The route, step by step
Step one — confirm the route. Establish which eligibility path is yours: the apprenticeship route or the long-experience route described below. Step two — assemble verified experience. Both routes run on verified experience under the supervision of a licensed plumber or master plumber; gather the verification before applying, not after. Step three — clear any prerequisite gate. Candidates on the non-certificate route whom the Board requires to take the Apprenticeship-By-pass examination must clear that gate first; it precedes the Prov examination and is not part of it. Step four — obtain Board approval and register with Prov. The Division forwards approved registrations to Prov; the candidate then registers and pays the $100.00 examination fee to Prov. Step five — sit the single examination: 100 questions, 180 minutes, open book, at a Prov centre in Dover or Wilmington or remotely through Examroom.ai proctoring. Step six — reach the standard: 70 percent, graded immediately, with results forwarded to the licensing authority. Step seven — hold and renew: a biennial license expiring October 31 of even-numbered years, renewed with five hours of continuing education. There is no second examined step after the master sitting, in either direction: no business paper follows it, and no journeyman paper precedes it.
The outline in full
The Prov content outline totals 100 questions across ten areas. Each area is stated here with its weight, because in an open-book sitting the outline’s weights decide where preparation time belongs: the examination rewards the candidate who can find and apply the right provision quickly in the areas carrying the most questions.
General Knowledge — 16 questions
The largest block in the sitting examines the trade’s shared foundation: materials, methods, terminology, and the general provisions of the plumbing code that govern work across every system. Sixteen questions is a sixth of the examination, and general knowledge items are where an open-book candidate’s indexing earns its keep — the answers are in the book, but only for the candidate who can reach the right chapter inside the time the question allows.
Drain, Waste and Vent Systems — 14 questions
Drainage and venting carry fourteen questions: sizing, slopes, venting methods, traps, and the code logic that keeps a drainage system sanitary. This is the area where the 2018 text must be the candidate’s reflex, because drainage provisions are exactly the kind of detailed, table-driven material that changes between editions.
Water Supply and Distribution — 14 questions
Water supply matches drainage at fourteen: distribution sizing, pressures, materials, protection of the potable supply, and the fixtures and demands the system serves. Together, drainage and water supply are 28 questions — more than a quarter of the sitting — and they are the two areas a candidate cannot afford to treat as familiar enough to skip.
Water Heaters — 10 questions
Ten questions on water heaters examine installation, venting, relief protection, and the safety provisions that govern appliances combining water, pressure, and a heat source. The weight is substantial — a tenth of the examination on one appliance family — and it reflects the inspection failures and hazards concentrated in this equipment.
Fuel Gas Systems — 10 questions
Fuel gas carries ten questions and brings the second code book with it. The tested fuel gas reference is the International Fuel Gas Code 2018, and gas sizing, piping materials, venting, and combustion air are examined from that text. Candidates whose daily work is wet plumbing should note the weight plainly: fuel gas is not a token area, and the candidate who studies only the plumbing code has set aside a tenth of the sitting before it begins.
Isometrics and Plan Reading — 8 questions
Eight questions test the reading of drawings: isometric layouts, plan information, and the reasoning that turns a drawing into sizes, runs, and quantities. This is a written, computer-delivered content area — there is no drawing to produce and nothing to build. The skill it examines is interpretation under time pressure, and it is trainable as such: timed reading of drawings, not drafting practice.
Plumbing Math — 8 questions
Eight questions of examined arithmetic: the calculations of sizing, offset, volume, and measurement that the trade uses daily, performed against the clock. Open book does not help a candidate who cannot set the calculation up; the book contains the tables, not the working. Timed calculation drills are the honest preparation for this block.
Fixtures and Fittings — 8 questions
Fixtures and fittings carry eight questions: fixture requirements, fitting applications, and the code provisions governing what may be installed where. The area rewards candidates who know the fixture provisions as a system rather than as a catalogue of separate rules.
Storm and Roof Drainage — 6 questions
Six questions examine storm water and roof drainage: sizing against rainfall, roof drain systems, and the separation of storm systems from sanitary drainage. A smaller block, but a self-contained one, and a candidate who has not studied it cannot borrow the marks from general knowledge.
Safety — 6 questions
Safety closes the outline at six questions: the safe conduct of plumbing and fuel gas work, examined as applied judgement in described situations. The block is short and its content is the kind experienced candidates most often assume they know; the sitting tests the provisions, not the assumption.
The two editions, held apart
No section of this guide matters more than this one. Delaware adopted the 2021 State of Delaware Plumbing Code — the 2021 International Plumbing Code with Delaware amendments, codified at 16 DE Admin. Code 4455 and effective August 11, 2022. That is the code governing plumbing work performed in Delaware. The Prov examination, however, lists as its open-book references the International Plumbing Code 2018 and the International Fuel Gas Code 2018. The tested edition is one edition behind the adopted edition. No Delaware amendment document is an examination reference, and Plumbing Basics for Contractors, 3rd Edition, 2014, is study material only — it may be studied before the sitting but it is not one of the references open during it.
The discipline this imposes is twofold. In preparation, every provision must be learned from the 2018 texts, and every place where the candidate’s working knowledge comes from the 2021 code must be checked against the older book. In practice after licensure, the discipline reverses: the licensee works to the adopted 2021 Delaware code, and the 2018 examination answers that differ must be left in the examination room. Confusing the two directions is the Delaware error — the examination is built in a way that detects it, because a candidate answering from the newer code will be confidently, currently, and incorrectly right.
Eligibility in depth
The statute’s first route is the apprenticeship route: a Journeyman’s Certificate from an apprenticeship program meeting or exceeding the Federal Bureau of Apprenticeship and Training Standards, followed by two years of verified experience under the supervision of a licensed plumber or master plumber. The certificate’s role must be understood exactly. Delaware does not license journeymen; the certificate evidences completed apprenticeship training and, paired with the two supervised years, qualifies its holder to seek the one license Delaware issues. Treating the certificate as a license — working independently on its strength, or describing oneself as a licensed Delaware journeyman — misstates the credential in a state that has deliberately chosen a single-license structure.
The second route serves the experienced worker without a certificate program behind them: seven years of verified experience under the supervision of a licensed plumber or master plumber, together with the apprenticeship-equivalency testing the Board requires of that route. Here the sources themselves require care. The statute speaks of an apprenticeship equivalency test approved by the Board and administered by a Delaware vocational-technical school; the regulations speak of a series of state-approved tests offered in the Delaware technical high schools or other apprenticeship school; the Division’s examinations page speaks of a single Apprenticeship-By-pass examination administered by Associated Builders and Contractors Delaware. This guide does not blend those three descriptions into one requirement, because they are not one description. The candidate on this route should confirm with the Board which instrument, and which administrator, currently applies to their case. What is consistent across the layers is the structure: long verified experience plus a Board-recognised demonstration of apprenticeship-equivalent knowledge, with the by-pass examination standing as a prerequisite gate before the Prov sitting for the candidates the Board directs to it — and with none of that gate’s mechanics (pass mark, format, fee, count, time, references) published on the Division’s examinations page, where this guide accordingly states none of them.
The statute adds standing requirements that apply across routes: the applicant must achieve a passing examination score and must be clear of the listed disqualifications — disqualifying administrative penalties, impairment, pending discipline or complaints, convictions substantially related to the trade, and felony sexual-offence convictions — subject to the Board’s waiver provisions. Reciprocity under section 1810 is a determination, not an entitlement: it turns on the Board’s assessment of whether the other jurisdiction’s standards are substantially similar to Delaware’s, with a statutory seven-years-after-licensure fallback where they are not. Out-of-state licensees should present their credentials to the Board for that determination rather than plan around an assumed outcome.
The sitting itself
The examination is computer-based, delivered at two Prov testing centres in Delaware — Dover and Wilmington, per the bulletin — or remotely via Examroom.ai proctoring, and offered in English. One hundred questions in 180 minutes is a pace of a little under two minutes per question, in an open-book format where the real skill is retrieval: the candidate who has tabbed, indexed, and rehearsed the two 2018 code books spends those minutes answering, while the candidate meeting the books for the first time spends them searching. Results are graded immediately and forwarded to the licensing authority. The bulletin states no experimental or pretest item count, and this guide prints none; candidates should distrust any secondary source that supplies one, as they should distrust the stale two-part description — with its separate Business and Law portion, its longer sitting, and its different vendor — wherever it still circulates. That examination is not the examination Delaware gives.
After a failure: the retake layers
A failed candidate faces three statements of the retake rules, one in each layer, and should plan on the strictest reading until the Division confirms otherwise. The bulletin permits up to three attempts on a single approval, requires a minimum seven-day wait before retesting, and then requires reapplication to the licensing authority; a passed examination may not be retaken unless the authority requires it. The regulations permit two additional retakes without further Board approval, and provide that after three failed attempts the applicant must reapply and may not reapply until one year has passed from the last attempt. The statute requires the examination to be offered at least quarterly and permits a failing applicant to apply to retake on the next available date. The layers are recorded here as written, not harmonised: the one-year regulation bar after a third failure is the constraint that should govern a candidate’s planning, and any candidate approaching a third attempt should treat that attempt with the seriousness its consequences carry.
After the sitting: the license and its cycle
The license is biennial and expires October 31 of even-numbered years. Renewal carries a continuing education requirement that is recent enough for stale sources to deny it exists: five hours of approved continuing education in each renewal period for plumbing licensees, composed of three hours on code changes, one hour on safety, and one hour on cross connections and back flow — a composition that mirrors the examination’s own emphases, code currency and safety and the protection of the water supply. Dual plumbing and HVACR licensees complete six total hours. Hours are due by October 31 of even-numbered years beginning in 2026, there is no carryover of excess hours, completion is attested at renewal, and the audit net is a random five percent of renewals plus every late renewal. New licensees are phased in: no hours at a first renewal if licensed less than one year, three hours if licensed between one and two years. Late renewal is available for up to one year after expiration, and inactive status may be held for up to five years. Current Division fee amounts for application and renewal are taken from the Division directly; they are not printed in this guide.
A study plan built on how this examination is actually put together
First, rebuild the code books. Obtain the 2018 IPC and the 2018 IFGC — the tested editions, not the adopted one — and make them working books: tabs placed, indexes learned, the candidate’s own retrieval routes rehearsed. An open-book examination is an examination of the candidate’s relationship with the book. Second, study by outline weight. The 44 questions of general knowledge, drainage and venting, and water supply come first and deepest; fuel gas and water heaters follow at their full weight; the smaller areas are then studied as the self-contained blocks they are. Third, quarantine the 2021 knowledge. Experienced Delaware plumbers work under the 2021 code daily; every study session should include a deliberate check of provisions known to have changed, learned in their 2018 form for the sitting. Fourth, drill the examined skills as skills: timed plumbing math, timed isometric and plan reading, timed lookups against the clock the sitting imposes. Fifth, close with the Delaware framework — the single-license structure, the two eligibility routes, the by-pass gate, the layered retakes, the renewal cycle — because a state whose whole system fits in one chapter still examines whether the candidate understands the system they are joining.
The errors this examination is built to catch
Studying for two examinations. The stale two-part description sends candidates to business and law material for a portion that does not exist, at the direct expense of the trade outline that does. Answering from the adopted code. The 2021 answer is the working answer and, where the editions differ, the wrong examination answer; the sitting credits 2018. Treating fuel gas as an annex. Ten questions and a separate code book say otherwise. Mistaking the Journeyman’s Certificate for a license. Delaware has one license; the certificate is apprenticeship completion plus a route to eligibility, and candidates who misread their own standing misread the system the examination assumes. Assuming the by-pass gate’s rules from secondary sources. Its mechanics are unpublished on the Division’s page; the Board is the source. Planning retakes from one layer only. The bulletin, the regulation, and the statute each speak; the one-year bar after three failures is the sentence that matters most and the one a single-layer reading can miss.
Delaware in one view
Delaware in one view is a state that chose simplicity and then demanded depth inside it. One license instead of a ladder. One sitting instead of a trade paper and a business paper. Two code books on the desk — but last edition’s books, while the work outside is inspected under the newer code the state has adopted. The Board’s framework fits in a single chapter of the Delaware Code and a single part of its administrative code, and the examination’s hundred questions range across the whole of the trade because there is no earlier sitting to have carried half of it. The candidate Delaware licenses has shown verified years under supervision, cleared whatever gate their route required, and answered for drainage and water and gas and safety in one three-hour sitting, in the 2018 texts. Preparation equal to that design is what the PassProfessor Delaware Master Plumber program — described on the companion Delaware Master Plumber Exam Preparation page — is built to provide, and the program is in the works as our catalog continues to expand into the plumbing trades: enrollment is not yet open, and the notify form on this page is the way to hear when it is.
Frequently asked questions
Is there a Delaware journeyman plumber examination?
No. Delaware issues no journeyman license and Prov examines no Delaware journeyman paper. The Journeyman’s Certificate is an apprenticeship-completion credential. The only examined Delaware plumbing license is the Master Plumber license.
Why do some websites describe a two-part Delaware examination with a Business and Law portion?
That description is stale. The bulletin of record — Prov document DE CIB 2026.10.31, effective October 31, 2026 — describes a single 100-question examination with no Business and Law portion or content area.
What is the passing score, and where is it set?
70% to pass, stated in the Prov Candidate Information Bulletin. The Board’s regulations state no numeric passing score for plumbing; the bulletin layer supplies the figure Prov applies.
How much time is allowed, and is the examination open book?
180 minutes for 100 questions, open book. The open-book references are the International Plumbing Code 2018 and the International Fuel Gas Code 2018.
Delaware adopted the 2021 code. Why study 2018?
Because the examination tests the 2018 editions. The adopted code — the 2021 State of Delaware Plumbing Code — governs work in the field; the tested references govern the sitting. Where the editions differ, the sitting credits the 2018 answer.
Can study materials be taken into the examination?
No. Plumbing Basics for Contractors, 3rd Edition, 2014 is listed as study material only. Only the listed code references are open-book references in the sitting.
What is the Apprenticeship-By-pass examination?
A prerequisite gate the Board requires of some applicants on the non-certificate route, administered by Associated Builders and Contractors Delaware, taken before the Prov examination. It is not part of the Prov examination, and its pass mark, format, fee, question count, time limit, and references are not stated on the Division’s examinations page.
How many times may a candidate retake the examination?
The bulletin permits up to three attempts on a single approval with a minimum seven-day wait before retesting. The regulations add that after three failed attempts the applicant must reapply and may not reapply until one year has passed from the last attempt.
Does Delaware recognise a master plumber license from another state?
Conditionally. Section 1810 turns on whether the other jurisdiction’s standards are substantially similar to Delaware’s, with a statutory fallback for applicants licensed seven years where they are not. The Board makes the determination.
What continuing education does a Delaware Master Plumber complete?
Five hours per renewal period — three hours of code changes, one hour of safety, and one hour on cross connections and back flow — by October 31 of even-numbered years, on a biennial license.
What fees should a candidate expect?
The Prov bulletin states a $100.00 examination fee, paid to Prov at registration. Division of Professional Regulation application and renewal fee amounts are not printed in this guide; take current amounts from the Division.
Is PassProfessor affiliated with the Board or Prov?
No. PassProfessor is an independent preparation provider, not affiliated with the Board, the Division of Professional Regulation, or Prov. The Board alone approves candidates and issues licenses.
When does enrollment open for the PassProfessor program?
The program is in the works and enrollment is not yet open. Leave an email address on this page and PassProfessor will write to you when the program is ready — and only about this program.
