Connecticut’s top plumbing credential is the P-1 Unlimited Plumbing Contractor license, issued by the Connecticut Department of Consumer Protection with the Plumbing and Piping Work Examining Board under Chapter 393 of the Connecticut General Statutes. There is no license class styled “master plumber” in Connecticut — candidates searching under that name are looking for this license. It is earned through two separately scored examination portions administered by PSI Services LLC: an eighty-question trade examination and a fifty-question Business and Law examination, each passed at a minimum of 70 percent, on references that allow the International Plumbing Code in the 2015, 2018, or 2021 edition. This guide explains the credential, both portions in depth, the edition question that defines Connecticut preparation, and the route from journeyperson to contractor.
This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.
The credential at a glance
| Item | Verified position |
|---|---|
| Program | Connecticut P-1 Unlimited Plumbing Contractor: the contractor tier of Connecticut plumbing licensure (journeyman tier: P-2 Unlimited Journeyperson Plumber) |
| Regulator | Connecticut Department of Consumer Protection (DCP), with the Plumbing and Piping Work Examining Board, under CGS Chapter 393 and RCSA §§ 20-332-1 to 20-332-21a |
| Examination administrator | PSI Services LLC, under contract with the State; eligibility for examination is determined by the State, not by PSI |
| Examination structure | Two portions, each separately scored, both required: P-1 trade examination + Business and Law examination |
| Trade portion | 80 scored questions / 3 hours / open book / computer-delivered |
| Business and Law portion | 50 scored questions / 2 hours / open book; sole allowed reference is the NASCLA Contractors Guide to Business, Law and Project Management, Connecticut, 5th Edition |
| Passing standard | Minimum passing score of 70 percent on EACH portion, separately (56 of 80 on the trade portion) |
| Tested code references | International Plumbing Code or International Plumbing Code Commentary, 2015, 2018, or 2021 edition; this guide keys preparation to the 2021 IPC as the lead edition |
| Examination fees | $59 to PSI for each examination portion |
| Administrator note | PassProfessor is independent and is not affiliated with the Connecticut Department of Consumer Protection or PSI |
Connecticut’s structure differs from the single-sitting model many candidates expect in two ways that organize everything else in this guide. First, the license is split across two examinations with two separate pass marks: trade and business competence are certified independently, and strength in one cannot rescue weakness in the other. Second, the trade examination’s code references span three editions of the same code rather than one, which makes edition discipline — knowing which edition an answer belongs to — a Connecticut skill in its own right. The companion program page at /connecticut-master-plumber-exam-prep/ describes the PassProfessor program built on the same structure.
The ladder: P-2 first, then the contractor tier
Connecticut licenses plumbing work through a short, strict ladder. The journeyman tier is the P-2 Unlimited Journeyperson Plumber license, reached through completion of a registered apprenticeship program or its equivalent. A P-2 holder may perform all plumbing and piping work — but only while in the employ of a contractor licensed for such work. The journeyperson’s authority is real but dependent: it travels with employment under a licensed contractor, not with the individual alone.
The P-1 Unlimited Plumbing Contractor removes that dependence. Its holder may perform all plumbing and piping work as defined in Section 20-330 of the Connecticut General Statutes, contracting in the holder’s own right. Two structural facts frame the tier. Chapter 393 licenses individuals only — there is no company or business plumbing license in Connecticut, so the P-1 is always a named person’s license even when a whole firm works under it — and both licenses are valid statewide without further municipal examination or licensing. Secondary sources sometimes describe the P-1 as a Connecticut “master plumber” license; that label is not evidence, and no such license class exists in the Connecticut scheme. No bond or surety requirement attaches to this credential in its sources.
Eligibility: journeyman experience, shown qualitatively and in full
P-1 qualification runs through the journeyman tier. The regulation frames the requirement as service as an unlimited licensed journeyperson, or equivalent experience and training; the statute frames it as service as a journeyman in the trade — with out-of-state journeyman service shown to be comparable — or satisfactory education and experience, plus passing the examination. This guide states the requirement in those qualitative terms deliberately: a candidate must arrive at the contractor examination with journeyman-level experience behind them, in the trade, at the unlimited level, or with experience and training the Department accepts as its equivalent. The Department’s equivalent-experience-and-training path carries one hard structural rule worth planning around: its classroom hours are mandatory, and on-the-job hours cannot substitute for them. A contractor applicant must additionally evidence compliance with workers’ compensation and unemployment insurance requirements.
The general applicant requirements sit underneath: an applicant must be at least eighteen years old, hold an eighth-grade diploma or equivalent education, and present evidence of competency and requisite skill as the Board requires. Procedure is individual throughout — only individuals may apply, the Department does not pre-approve or review applications before submission, and every individual applicant must take the examinations. State approval opens an eligibility window of one year, during which examinations may be taken on an unlimited basis. That window shapes preparation strategy: it is long enough to recover from a failed portion, and short enough that a candidate who opens it before preparing spends it on tuition in the form of retake fees.
For plumbers arriving from other states, the layers must be kept separate. Connecticut’s statute and regulation authorize reciprocal arrangements in principle, but the Department states flatly that Connecticut has no reciprocal agreements with any other jurisdiction, and no state is named in any primary source. In practice, an equivalent out-of-state license goes through the Department’s equivalency path — a review of equivalence, not reciprocity — and candidates should plan on demonstrating experience and training, and on examination, rather than on a license transfer.
The trade portion in full
The P-1 trade examination is an eighty-question, three-hour, open-book examination delivered by computer at PSI examination centers. Questions are presented one at a time on screen. A tutorial of up to fifteen minutes may precede the sitting and is not counted as examination time. Between one and five unscored experimental questions may be added; they are not scored and are not counted against the candidate’s time. Candidates bring their own references, which may be highlighted, underlined, annotated, or indexed before the session — never written in during it — with permanent tabs only, and a silent, nonprinting, non-programmable calculator is permitted. There is no hands-on practical and no drawing-production component in this examination; the drawing content arrives as isometric analysis questions to be read and answered, and this guide promises no rehearsal of a practical that does not exist.
The sixteen-area outline, at its published weights, is the examination’s own map of itself:
Drain, Waste, and Vent — fourteen questions. The largest block in the sitting, and the core of the trade: drainage systems, waste systems, and the venting that protects them, at design depth rather than installation recall.
Isometric Analysis — nine questions. Reading piping isometrics and extracting what a drawing asserts about runs, fittings, and layout. Nine questions make drawing literacy the joint-second-largest skill in the examination.
Gas Systems — nine questions. Fuel gas piping and systems, drawn against the listed gas references as well as the code.
Safety and Excavation — six questions. Jobsite safety and excavation practice, keyed to the listed OSHA construction standards.
Water Supply — six questions. Supply systems, distribution, and the protection of potable water.
Fixtures and Equipment — five questions. The fixtures themselves and the equipment that serves them.
General Plumbing Regulations — four questions. The regulatory frame of the trade as the outline names it.
Cleanouts — four questions, and Traps and Interceptors — four questions. Access, trap protection, and interception, each weighted as its own area.
Piping, Valves, and Controls; Backflow; Hangers and Supports; Joints and Connections; and Water Treatment — three questions each. The component layer of the trade, five areas deep.
Water Heaters and Developed Length — two questions each. Developed length, the measurement discipline behind pipe sizing, closes the outline — small in count, and exactly the kind of area a candidate loses by assuming the tail of an outline does not matter.
The passing standard is a minimum of 70 percent, applied to this portion on its own. The bulletin works the example in the candidate’s favor: on an eighty-question examination, 70 percent is fifty-six questions correct. The regulation layer states the same standard in the same terms — a license issues to a person attaining a minimum grade of seventy percent on the examination and paying the license fee, and a grade below seventy percent is a failure. Scores arrive immediately on screen when the portion ends, with an official score report printed at the site.
The Business and Law portion in full
The Business and Law examination is required for contractor licenses, and journeypersons do not take it — it is the portion the contractor tier adds. It runs fifty scored questions in two hours, open book, with a single allowed reference: the NASCLA Contractors Guide to Business, Law and Project Management, Connecticut, 5th Edition. One book, fifty questions, one separate pass mark. Its outline, at published weights:
Estimating and Bidding — seven questions, the largest block: pricing work accurately is the first business skill the state examines. Contracts — six questions. Then five areas at five questions each: Licensing, Tax Laws, Labor Laws, Project Management, and Environmental and Safety — the compliance skeleton of a Connecticut contracting business. Financial Management and Risk Management carry four each, and Lien Law and Business Organization close the outline at two each.
Candidates consistently misjudge this portion in one direction: they treat it as an administrative errand attached to the real examination. The structure forbids that reading. The business portion is scored separately, passed separately at the same standard, and a candidate who clears the trade portion and fails this one is not licensed — though the passed portion’s score remains valid for two years, so the correction is focused rather than a full restart.
The edition question: three listed editions, one lead
No feature of Connecticut preparation causes more quiet damage than the code edition, so this guide states the layers in order and does not merge them. The examination layer: the PSI reference list for both the P-1 and the P-2 allows the International Plumbing Code, or the International Plumbing Code Commentary, in the 2015, 2018, or 2021 edition, and states that for code questions, the examinations are based only on the edition of the code book listed. There is no single tested edition to memorize against; there is a listed set of three, and the candidate’s own brought reference is part of the sitting’s mechanics. The bulletin does not list the 2024 IPC, and no Connecticut amendment or supplement document, statute or regulation volume, or Connecticut plumbing code appears on the P-1 or P-2 reference lists — Connecticut-amendment content must not be studied as if it were examination-keyed.
The adoption layer: Connecticut’s adopted plumbing code is the 2021 International Plumbing Code as amended by the Connecticut amendment document, forming part of the 2022 Connecticut State Building Code for permit applications filed from October 1, 2022. So the newest listed examination edition and the adopted edition coincide at 2021 — but the adopted amendments are not examination references, and the examination set remains wider than the adopted edition. The working resolution this guide and the PassProfessor program both use: prepare on the 2021 IPC as the lead edition, and flag every item whose correct answer differs between the 2015 or 2018 editions and the 2021 edition as edition-sensitive, so the candidate knows which answers are stable across the listed set and which depend on the book in hand.
The remaining trade references deserve the same respect as the code: NFPA 54 in its listed edition or its Handbook; NFPA 58; the OSHA construction standards at 29 CFR Part 1926, with latest amendments, or PSI’s selections volume; Water Processing, third edition; and NFPA 56 in its current edition. The Gas Systems and Safety and Excavation areas cannot be prepared from a plumbing code alone, because the bulletin does not build them from one. Two further titles — a plumber’s mathematics text and a plumbing design and installation text — appear as study material only; they are not allowed in the examination center.
Fees, retakes, and the discipline of the window
PSI charges $59 for each examination portion, first attempt or repeat, neither refundable nor transferable; a first-time P-1 candidate therefore pays $118 across the two portions. The state-side charges are distinct from the examination charges: the Department’s application fee for a contractor is $150.00, and the statute sets the initial license fee for a contractor’s license at $150, with renewal also $150. One sourcing note belongs in the open: the examination bulletin itself does not print the post-pass licensing fee — candidates receive the amount on the passing score report — and the $150 license figure stated here is the statute’s figure, not a bulletin figure. License fees are not prorated, all Connecticut plumbing and pipefitting licenses expire annually on October 31, and replacing a missing license costs $5.00 on a notarized statement.
Retake procedure is prompt but procedural. A candidate may not rebook for the same day after a sitting; an unsuccessful candidate may rebook the next day and retest as soon as space allows, at the same $59 per portion, within the one-year eligibility window, and no attempt cap is stated beyond that window. Cancellation or rescheduling without forfeiting the fee requires notice two days before the scheduled date through the PSI website or a representative; voicemail is expressly not an acceptable cancellation, and the fee is forfeited for a late cancellation, a no-show, a late arrival, or improper identification. Two post-failure resources should be used deliberately: thirty minutes at the end of a failed examination to review missed items at no charge, and a diagnostic report of strengths and weaknesses that maps onto the outline areas above. The regulation layer adds a narrower review route for a candidate who has failed at least twice with a most recent score in the high sixties — a review of the examination, though not a viewing of it — with rescoring requests due within ten days of receiving a score.
After the sitting: renewal and continuing education
A license issues on attaining the passing grade on the examinations and paying the license fee. The P-1 then renews annually — every Connecticut plumbing and pipefitting license expires October 31 — at the $150 contractor renewal fee. Continuing education applies to Connecticut plumbers under the enabling statute and the continuing-education regulation: it runs on a two-year cycle that closes on July 31 of an even-numbered year, three months ahead of the renewal it supports; courses must be approved; no continuing education is required before a licensee’s first renewal; licensees attest to completion at renewal; and certificates of completion must be retained for at least four years for audit.
This guide states that framework and stops there on one deliberate point: it prints no hour count for the unlimited contractor’s continuing-education requirement. Candidates renewing a P-1 should take the current hour requirement for their license class from the Department’s continuing-education page at renewal time. A guide that printed a confident figure it could not stand behind would be doing exactly what this guide exists to prevent — the same discipline explains other silences in these pages, from the absence of named reciprocating states to the labeling of the license fee as a statute figure.
A study plan built on how these examinations are actually put together
Sequence the work by portion and by weight. First, the trade outline at its published weights: drainage, waste, and venting until the fourteen-question block feels like home ground, then isometric analysis and gas systems, then the six-question areas, then breadth across the component tail — with developed length and water heaters deliberately included rather than assumed away. Second, edition discipline: work the 2021 IPC as the lead text, and keep a running list of edition-sensitive points where the earlier listed editions answer differently. Third, the listed references beyond the code: the gas standards behind the Gas Systems block and the OSHA selections behind Safety and Excavation, opened before the sitting rather than discovered in it. Fourth, the business portion as its own campaign: the NASCLA Connecticut guide worked area by area at outline weights, estimating and bidding first, because a separate 70 percent standard makes this portion a second examination rather than a supplement. Fifth, the open-book mechanics themselves: references tabbed and marked in advance — never written in during the sitting — and timed practice at finding answers in the books, since an open-book examination rewards retrieval speed as much as knowledge.
The errors these examinations are built to catch
Connecticut’s two portions are built to catch distinct families of error. Averaging in the head — assuming a strong trade score carries a weak business score — fails at the structure: each portion is passed at 70 percent on its own. Preparing a single code edition as if it were the tested edition ignores the listed range and leaves edition-sensitive answers to chance. Studying Connecticut’s adopted amendments as examination content misreads the reference lists, which carry no Connecticut amendment document. Neglecting the gas and safety references concedes outline blocks the plumbing code does not cover. Opening the eligibility window unprepared converts a one-year, unlimited-attempt window from a safety net into a schedule of retake fees at $59 a portion. And searching for a Connecticut master plumber license — the error this guide began with — sends candidates to secondary sources for a credential Connecticut does not issue, when the license they mean is the P-1 Unlimited Plumbing Contractor.
What the PassProfessor program will cover
The PassProfessor Connecticut P-1 Unlimited Plumbing Contractor program, described in full on the companion program page at /connecticut-master-plumber-exam-prep/, mirrors the license’s own construction: a trade half built on the sixteen-area outline at published weights and keyed to the 2021 IPC as lead edition with edition-sensitive answers flagged, and a business half built on the eleven-area Business and Law outline from the NASCLA Connecticut guide. Every item is written from scratch against primary sources. PassProfessor is an independent preparation provider, not affiliated with the Connecticut Department of Consumer Protection, the Plumbing and Piping Work Examining Board, or PSI; the Department alone licenses, and candidates register for examinations through PSI’s channels after state approval.
Tell me when enrollment opens. The Connecticut P-1 Unlimited Plumbing Contractor program is in the works and enrollment is not yet open. Our catalog now includes preparation for the top plumbing tiers across the country, and this program joins it when it meets the standard described above. Leave an email address and PassProfessor will write to you when the program is ready — and only about this program. No date is promised.
Frequently asked questions
Is there a Connecticut master plumber license?
No. Connecticut has no license class styled “master plumber.” The top plumbing credential is the P-1 Unlimited Plumbing Contractor license; the journeyman tier is the P-2 Unlimited Journeyperson Plumber license. Sources using the other label are not describing a Connecticut credential.
Who issues the P-1, and who gives its examinations?
The Connecticut Department of Consumer Protection, with the Plumbing and Piping Work Examining Board, issues the license under CGS Chapter 393. PSI Services LLC administers the examinations under contract with the State; eligibility is determined by the State, not by PSI.
How many examinations does the P-1 require, and what passes?
Two portions, each scored separately: the trade examination — eighty scored questions, three hours, open book — and the Business and Law examination — fifty scored questions, two hours, open book. The minimum passing score is 70 percent on each portion separately; on the trade examination, that is fifty-six questions correct.
How long does a passed portion stay valid?
Any portion score is valid for two years from the date it was passed. State eligibility to sit runs one year from approval, with examinations on an unlimited basis inside that year.
Which code edition should a candidate study?
The reference list allows the International Plumbing Code or its Commentary in the 2015, 2018, or 2021 edition. This guide keys preparation to the 2021 IPC as the lead edition — the newest listed, and the edition Connecticut adopted with amendments in the 2022 Connecticut State Building Code — and flags answers that differ across the listed editions as edition-sensitive. Connecticut’s amendment document is not an examination reference.
What references may a candidate bring to the trade examination?
The listed set: the IPC or IPC Commentary in a listed edition; NFPA 54 or its Handbook; NFPA 58; the OSHA construction standards at 29 CFR Part 1926 or PSI’s selections; Water Processing, third edition; and NFPA 56, current edition. References may be marked and permanently tabbed before the session, but never written in during it.
What does the Business and Law portion allow and cover?
One allowed reference — the NASCLA Contractors Guide to Business, Law and Project Management, Connecticut, 5th Edition — across fifty questions weighted toward estimating and bidding, contracts, licensing, tax laws, labor laws, project management, and environmental and safety, with financial management, risk management, lien law, and business organization completing the outline.
What experience must precede the P-1?
Experience and training as an unlimited licensed journeyperson, or equivalent experience and training, stated qualitatively in this guide. The Department’s equivalent path keeps a mandatory classroom component that on-the-job hours cannot replace, and a contractor applicant must evidence workers’ compensation and unemployment insurance compliance.
What fees should a first-time P-1 candidate expect?
PSI charges $59 per examination portion — $118 across both portions. The Department’s contractor application fee is $150.00, and the statute sets the initial contractor license fee and the renewal fee at $150 each; licenses expire annually on October 31.
What happens after a failed portion?
The candidate receives scores immediately, thirty minutes at the end of the sitting to review missed items at no charge, and a diagnostic strengths-and-weaknesses report. Retesting may be rebooked from the next day, at $59 per portion, inside the one-year eligibility window; a passed portion’s score remains valid for two years.
Does Connecticut reciprocate with other states?
The Department states that Connecticut has no reciprocal agreements with any other jurisdiction. An equivalent out-of-state license goes through an equivalency review; it is not reciprocity, and no state is named in any primary source.
Is continuing education required to hold the P-1?
Yes — continuing education applies on a two-year cycle of Department-approved courses, with attestation at renewal and certificates retained at least four years, and it is not required before a first renewal. This guide prints no hour count for the unlimited contractor tier; take the current figure for the license class from the Department’s continuing-education page at renewal time.
Is PassProfessor affiliated with the Department of Consumer Protection or PSI?
No. PassProfessor is an independent preparation provider. The Department alone licenses, and examinations are registered through PSI after state approval.
When does enrollment open for the PassProfessor program?
The program is in the works and enrollment is not yet open. Leave an email address on this page and PassProfessor will write to you when the program is ready — and only about this program.
