Arkansas Master Plumber Exam Guide: The Credential, the Four Sections, and the Route Between Them

Arkansas licenses its Master Plumbers through the State Board of Health and the Arkansas Department of Health’s Plumbing and Natural Gas Section, under Title 17, Chapter 38 of the Arkansas Code and the licensing rules at 17 CAR Part 66. The master examination is administered by the Department itself and is built in four sections taken one at a time inside a single four-hour sitting, keyed to the 2018 Arkansas Plumbing Code, the 2018 Arkansas Fuel Gas Code, and the Arkansas State Plumbing Law. This guide explains the credential, each section in depth, and the route from journeyman to master — and it is candid about the one figure Arkansas does not publish: the Board states no passing score for this examination, and this guide prints none.

This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.

The credential at a glance

ItemVerified position
ProgramArkansas Master Plumber: the top examined plumbing tier in Arkansas
RegulatorState Board of Health / Arkansas Department of Health (ADH), Plumbing and Natural Gas Section, under Ark. Code Ann. Title 17, Chapter 38 and 17 CAR Part 66
Eligibility bodyThe Committee of Plumbing Examiners (seven voting members appointed by the State Board of Health) determines applicant eligibility and advises the Board on rulemaking
Examination administratorBoard-administered by the ADH Plumbing and Natural Gas Section / Committee framework — no third-party vendor
Examination structureFour sections, given one at a time in random order, inside a single four-hour sitting; candidates are not timed per section
Tested references2018 Arkansas Plumbing Code + 2018 Arkansas Fuel Gas Code + the Arkansas State Plumbing Law
Passing standardThe Board does not publish a passing score for the Master Plumber examination, and none is stated in this guide
Fees (Board rule)Application fee $125; annual license fee $200; license expires December 31
Continuing educationNo continuing-education requirement applies to master plumber renewal
Administrator notePassProfessor is independent and is not affiliated with the State Board of Health or the Arkansas Department of Health

Arkansas is a board-administered state in the full sense: the same Department that writes the licensing rules, reviews the applications, and issues the licenses also gives the examination — there is no national testing company in the process, and no candidate bulletin from one. The authoritative description of the sitting is the Department’s own Master Examination Information Guide, and this guide follows that document’s structure rather than the generic shape secondary sources try to impose on it. The companion program page at /arkansas-master-plumber-exam-prep/ describes the PassProfessor Arkansas Master Plumber program built on the same structure.

The ladder the examination sits on top of

The Arkansas ladder has three examined or registered rungs that matter here, and the master sitting only makes sense against all three. At the base, a registered apprentice completes a minimum of four years of apprenticeship: eight periods of 1,000 hours of practical work — 8,000 hours in total — paired with eight periods of 80 hours of related technical instruction, 640 hours in total. A completing apprentice then has one year from completion to pass the journeyman examination. The journeyman tier is the installation tier: its examination covers the same Arkansas codes, with the gas material combined into a single section, a code-illustrations section in which the candidate identifies components from diagrams, and a 45-degree offset calculation in its first section.

The master tier changes the question the state is asking. The statute defines a master plumber as a person skilled in the planning, superintending, and practical installation of plumbing, familiar with the laws and rules governing it — planning and superintending named before installation. The license carries that weight in practice: no plumbing may be installed in any Arkansas city or town, or in any sewerage or water district, association, or utility gas system, unless a licensed master plumber, or a restricted licensed plumber acting within that license’s scope, responsible for proper installation is in charge at all times. Chapter 38 states no numeric apprentice supervision ratio, and candidates should not import one from another state or from a secondary source; the Arkansas duty is framed as responsible charge, not as a headcount. Only a licensed master plumber may use or display the title itself.

Two structural facts complete the picture. First, there is no separate Arkansas plumbing contractor license under Chapter 38 and no business-and-law contractor examination at the master tier — a candidate’s route runs through this one examination, and general contractor licensing through the separate Arkansas Contractors Licensing Board is a different credential entirely. Second, Arkansas maintains a Restricted Lifetime Master Plumber license for a plumber licensed as a master for at least twelve years who is sixty-five or older: a lifetime, nontransferable license with narrower practice rights. It requires no examination and is not a route to the full master credential this guide covers.

Eligibility: five years, documented, plus the journeyman year

Eligibility for the master examination is determined by the Committee of Plumbing Examiners — two master plumbers, one journeyman plumber, one professional engineer with plumbing-design expertise, two consumers, and one Department of Health representative, appointed by the State Board of Health — which reviews applications at its regular monthly meetings. The substantive gate is experience. An applicant must show a minimum of five years of experience, and the showing is documentary: records, affidavits, or bona fide evidence from licensing agencies or qualified former employers, demonstrating experience in all phases of plumbing and natural gas work. A current Arkansas Journeyman Plumber satisfies the documentation through work history covering the length of the journeymanship, but carries one additional rule: a journeyman license holder must hold that license for one full year before becoming eligible for the master examination.

The Committee holds two safety valves. It may waive the journeyman-year requirement in whole or in part where extreme hardship is shown, and registered professional engineers with special expertise in plumbing engineering may be considered by the Committee for the master examination on their own footing. On Committee approval of eligibility, the Plumbing and Natural Gas Section can issue temporary, revocable permits — provisional licensing for ninety days, extendable up to ninety more days for hardship — and a candidate holding such a permit must attend scheduled examinations unless officially excused, or forfeit the permit. Approved applicants for the examination itself receive a Notification of Examination by mail. Fees discipline the paperwork: all fees must accompany the application, and an application submitted without the required fee is not considered and is discarded without review.

Out-of-state plumbers meet two distinct Arkansas mechanisms, kept separate here because the sources keep them separate. The statute layer contemplates an out-of-state master or journeyman licensed under similar laws and codes sitting for the Arkansas examination. The rule layer authorizes reciprocal agreements with substantially similar jurisdictions — those that have adopted a national model code and examine comprehensively through a national agency or an equivalent — under which no examination is required; no state is named in any source, and this guide names none. Automatic licensure routes also exist for uniformed service members, veterans, and spouses, and under Act 457 of 2023.

The sitting in full

The examination is given in four sections, one at a time, in random order. Each completed section is exchanged for the next, candidates are not timed per section, and four hours are allowed to complete all four. That single design decision shapes the whole sitting: there is no published per-section clock to pace against, no way to know which section arrives first, and no opportunity to return to a section once it has been exchanged. The candidate’s time allocation is a judgment exercised live, four times, in an order the candidate does not choose.

Section 1 — Drawings, water sizing, and fixture spacing

Section 1 is the section that makes the Arkansas master examination different from a written test, and it has three distinct tasks. The first is drawing production: for a provided floor plan, the candidate draws a drain, waste, and vent riser diagram on paper the Department provides, in isometric format, with vents drawn in blue and drains drawn in red, and with sizing notations wherever pipe sizes change. This is a genuine drawing-production component — the candidate produces the diagram rather than interpreting one — and it must be named plainly: a written practice program can teach the sizing methods and the reading of a floor plan, but it cannot rehearse the act of drawing the riser itself. Candidates preparing seriously will draw riser diagrams by hand, in two colors, against a clock, well before the sitting.

The second task is water-system sizing: from a written building description, the candidate sizes the water system using Appendix E of the 2018 Arkansas Plumbing Code, through a set of ten questions attached to that exercise. The third task is a calculation of fixture spacing in a given room — a layout judgment from the planning side of the master definition, where the journeyman sitting instead requires a 45-degree offset calculation in its own first section.

Section 2 — Fifty questions across three sources

Section 2 is the question section: fifty questions formed at random from the 2018 Arkansas Plumbing Code, the 2018 Arkansas Fuel Gas Code, and the Arkansas State Plumbing Law. Two disciplines follow. No split among the three sources is stated anywhere — a candidate cannot responsibly prepare the plumbing code deeply and the plumbing law lightly on a guess about proportions. And the sources are Arkansas instruments: the Arkansas Plumbing Code rather than the bare 2018 International Plumbing Code it is built on, the Arkansas Fuel Gas Code published separately from it, and the Arkansas plumbing law in its own right. Arkansas law is not a garnish on this section; it is one of three named sources, examined as one.

Section 3 — Vents and combustion and ventilation air

Section 3 separates the gas work that the journeyman sitting combines, and gives venting its own exercise. The candidate sizes flue-gas venting under Chapter 5 of the 2018 Arkansas Fuel Gas Code, and calculates combustion and ventilation air under the cited sections of that code. These are calculation tasks, not recall tasks: the candidate works from the code’s method to a sized answer, and the preparation that serves them is worked examples carried through the Arkansas Fuel Gas Code’s own procedures.

Section 4 — Gas pipe sizing by the Longest Length Method

Section 4 completes the gas sequence: the candidate sizes each segment of a natural gas piping system at various lengths and pressures, using the Longest Length Method set out in Appendix A of the 2018 Arkansas Fuel Gas Code. Segment-by-segment sizing at varying lengths and pressures is exactly the design work a master plumber performs when laying out a gas system for a building, which is the point — Sections 3 and 4 together examine whether the candidate can design the gas side of an installation, not merely connect it.

What the sources do not state — and this guide does not invent

An honest guide names its silences. The Board’s sources state no whole-exam question total: Section 2 carries fifty questions and the Section 1 water-sizing exercise carries ten, and no total beyond those stated counts is published. The sources state no book policy, no list of permitted or prohibited references, calculators, or tabs, and do not say whether candidates supply their own code books. They do not state how the performance sections are scored, or whether each section must be passed separately. And — most consequentially — they publish no passing score, a point the next section takes up directly. Any secondary source that fills these silences with confident figures is unreliable on its face.

The passing standard Arkansas does not publish

No primary document for this credential states a pass percentage or mark for the Master Plumber examination — not per section, and not for the examination as a whole. The same is true of the Journeyman Plumber examination. This guide therefore states the position exactly as the sources leave it: the Arkansas Master Plumber passing standard is unpublished, and no figure is printed here.

The warning that follows matters, because the error is easy to make. Trade directories and preparation sites circulate a tidy description of Arkansas plumbing examinations — a round question count, a round time, a book label, and a familiar percentage pass mark. That description is contradicted by the Board’s own guide on structure and time and unsupported by any primary source on the rest, and it is barred from this guide in every role. A percentage pass mark does exist elsewhere in the Arkansas plumbing rules — attached to a different credential, the plumbing and gas inspector certification examination — and it does not transfer to the master or journeyman examinations in any way. The practical consequence is simple: prepare to the full depth of all four sections, because the Board’s unpublished standard gives no partial target to aim at.

Fees, dates, and the cost of a failed portion

The fee schedule is set by Board rule at 17 CAR Part 66; the statute authorizes reasonable fees and states no amounts. For the master tier, the application fee is $125 — labeled an application fee in both the rule and the Department’s instructions, with no separate additional first-attempt examination fee stated beyond it — and the annual license fee is $200, with the license expiring December 31. An additional examination fee of $50 is charged in two situations: failure to appear without proper notification, and failure of any portion of the test. Nonscheduled or oral examinations carry an additional $50 per examination. The sources state no waiting period, no attempt limit, and no section-by-section retake procedure beyond that fee, and this guide invents none; a candidate planning a retake should confirm current procedure with the Plumbing and Natural Gas Section directly. An initial-license fee waiver exists for the applicant categories established by Act 725 of 2021, including recipients of Medicaid, SNAP, WIC, TEA, or Lifeline benefits, applicants with a recent unemployment-benefit approval, and applicants with income at or below 200 percent of the federal poverty guidelines.

The statute requires regular examinations at least two times a year; the Department’s published 2026 calendar goes well beyond that floor, listing eleven examination dates — January 30, February 27, March 27, April 24, May 29, June 26, July 31, August 28, September 25, October 30, and December 4, 2026, with November carrying no examinations — held at the Department’s auditorium and room L137. Because applications are reviewed at the Committee’s regular monthly meetings before a Notification of Examination is mailed, the calendar rewards early filing: the examination date a candidate wants is reached through the monthly review cycle, not around it.

After the sitting: the annual license and its renewal

Unless entitled to renewal, an Arkansas master license issues only after the applicant passes a satisfactory examination showing fitness — the statute’s framing, with the standard itself left to the Board’s administration. The license then runs on an annual cycle: it expires December 31, is renewable by February 1, and after that date accrues a late penalty of $5.00 per month, with all unpaid fees and penalties payable before renewal and a hardship installment plan available for back fees only.

Renewal carries one position that candidates from other states consistently misjudge: there is no continuing-education requirement for master plumber renewal in Arkansas. A full reading of the licensing statute’s renewal provisions and the licensing rules returns no continuing-education hours for master, journeyman, or apprentice renewal; renewal turns on fees and penalties only. The training obligations that do appear in Arkansas plumbing regulation attach to other credentials — inspector renewal carries refresher training, and backflow tester renewal carries an approved recertification course — and neither transfers to this license. Other rule figures a master holder may meet across a career: reinstatement of an expired master license costs $325 plus back fees and penalties; transfer of a master license to a journeyman license costs $20; license deferment costs $20 per year, free for armed-services members and spouses. A licensee delinquent for five consecutive years faces a Committee decision on whether an examination is required for reinstatement.

A study plan built on how this examination is actually put together

Sequence preparation by section, because the sitting’s demands differ by kind. First, the drawing discipline: produce isometric riser diagrams by hand from floor plans, vents in blue and drains in red, with sizing notations at every change of pipe size, under a self-imposed clock — the one component no question bank can rehearse for you. Second, the sizing methods: Appendix E water sizing, fixture-spacing calculation, flue-gas vent sizing, combustion and ventilation air calculation, and Longest Length Method gas pipe sizing, each worked until the method — not the answer — is automatic. Third, the three-source question field: the two Arkansas codes and the Arkansas State Plumbing Law read as three co-equal sources for Section 2, with the law studied as law — who may hold which license, who must be in responsible charge, what the Committee does, how renewal and penalties run. Fourth, the pacing judgment: practice the four sections in random order inside a single four-hour block, because the sitting exchanges each completed section for the next and gives no section its own clock. Fifth, the eligibility file: assemble the five-year documentation early, while the Committee’s monthly review cycle still leaves room to correct it.

The errors this examination is built to catch

The Arkansas sitting is built to catch imported assumptions. Importing a published pass mark — from a trade directory, another state, or another Arkansas credential — fails before the sitting begins, because Arkansas publishes none for this examination. Preparing the bare model code instead of the Arkansas instruments misaligns every keyed section. Neglecting the Arkansas plumbing law as a Section 2 source concedes a third of the named question field. Treating Section 1 as an interpretation exercise — expecting diagrams to read rather than diagrams to draw — leaves the sitting’s signature component unpracticed. Front-loading time on whichever section arrives first ignores the exchange structure: each section is surrendered before the next appears, and the four hours are shared. And assuming a continuing-education or supervision-ratio rule from a neighboring state misstates Arkansas law in both directions — Arkansas has neither in Chapter 38.

What the PassProfessor program will cover

The PassProfessor Arkansas Master Plumber program, described in full on the companion program page at /arkansas-master-plumber-exam-prep/, is built section by section against the Board’s own guide: sizing method for Section 1’s water exercise and fixture spacing, the three-source question field for Section 2, venting and combustion-air calculation for Section 3, and Longest Length Method gas sizing for Section 4, together with the licensing framework — Committee eligibility, fees, the annual renewal cycle, and the responsible-charge duty. Every item is written from scratch against primary sources. Two limits travel with the program wherever it is described: it cannot rehearse the hand-drawn riser diagram itself, which candidates must practice on paper, and it states no passing score for this examination, because the Board publishes none. PassProfessor is an independent preparation provider, not affiliated with the State Board of Health or the Arkansas Department of Health; the Department alone licenses, and candidates apply and sit through the Department’s channels.

Tell me when enrollment opens. The Arkansas Master Plumber program is in the works and enrollment is not yet open. Our catalog now includes preparation for the top plumbing tiers across the country, and this program joins it when it meets the standard described above. Leave an email address and PassProfessor will write to you when the program is ready — and only about this program. No date is promised.

Frequently asked questions

Who licenses Master Plumbers in Arkansas?

The State Board of Health, through the Arkansas Department of Health’s Plumbing and Natural Gas Section, under Ark. Code Ann. Title 17, Chapter 38 and 17 CAR Part 66. The Committee of Plumbing Examiners determines eligibility and advises the Board on rulemaking.

Is the Arkansas Master Plumber examination given by a testing company?

No. It is board-administered — given through the Arkansas Department of Health Plumbing and Natural Gas Section and Committee framework. No third-party vendor is named in the Board’s sources.

How is the master examination structured?

Four sections, given one at a time in random order, with each completed section exchanged for the next and four hours to complete all four. Candidates are not timed per section.

What happens in Section 1?

The candidate hand-draws an isometric drain, waste, and vent riser diagram for a provided floor plan — vents in blue, drains in red, with sizing notations — sizes a water system from a building description using Appendix E of the 2018 Arkansas Plumbing Code through ten questions, and calculates fixture spacing in a given room.

How many questions does the whole examination have?

No whole-exam total is published. The stated counts are fifty questions in Section 2 and ten questions attached to the Section 1 water-sizing exercise; this guide prints no total beyond them.

What score passes the Arkansas Master Plumber examination?

Arkansas does not publish one. No primary source states a pass percentage or mark for the master or journeyman examinations, and this guide states none. Figures circulating in secondary sources are not Board-published figures for this license.

What references is the examination keyed to?

The 2018 Arkansas Plumbing Code, the 2018 Arkansas Fuel Gas Code, and the Arkansas State Plumbing Law — the three sources named in the Board’s Master Examination Information Guide. The tested edition matches the adopted edition: Arkansas adopted the 2018 Arkansas Plumbing Code, based on the 2018 International Plumbing Code, in 2021.

How does the master sitting differ from the journeyman sitting?

The master examination separates gas work into a venting and combustion-air section and a gas pipe sizing section, and its first section requires a fixture-spacing calculation. The journeyman examination combines the gas material in one section, uses a code-illustrations section, and requires a 45-degree offset calculation in its first section.

What experience is required before sitting?

A minimum of five years of documented experience in all phases of plumbing and natural gas work, shown by records, affidavits, or bona fide evidence. A journeyman license holder must also have held the journeyman license for one full year, subject to a Committee hardship waiver.

What fees apply to the master credential?

A $125 application fee and a $200 annual license fee under the Board’s rule, plus a $50 additional examination fee after a failure to appear without proper notification or a failure of any portion of the test.

Does Arkansas require continuing education to renew a master license?

No. No continuing-education requirement applies to master, journeyman, or apprentice renewal in Arkansas; renewal turns on fees and the $5.00-per-month late penalty after February 1.

When is the examination offered?

The statute requires regular examinations at least twice a year. The Department’s 2026 calendar lists eleven dates across the year, with no examinations in November; applications are reviewed at the Committee’s monthly meetings before a Notification of Examination is mailed.

Is PassProfessor affiliated with the Arkansas Department of Health?

No. PassProfessor is an independent preparation provider. The Department alone licenses master plumbers and administers the examinations.

When does enrollment open for the PassProfessor program?

The program is in the works and enrollment is not yet open. Leave an email address on this page and PassProfessor will write to you when the program is ready — and only about this program.