North Dakota Journeyman Plumber Exam Prep

North Dakota licenses its Journeyman Plumber through an examination the Board administers itself, in five parts over five hours, on the 2018 North Dakota Plumbing Code. The passing standard is 70 percent. The PassProfessor North Dakota Journeyman Plumber program prepares candidates for that written examination — its closed-book opening parts, its open-book sizing work, and the North Dakota code as the state actually adopted it.

This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.

What this credential certifies

The North Dakota Journeyman Plumber license certifies that the holder has demonstrated, by examination and by the state’s application process, the code knowledge and sizing judgement to install, alter and repair plumbing systems to the North Dakota Plumbing Code without working under another licensee’s direction on every task. It is the working credential of the trade in the state: the journeyman is the plumber on the tools whose sizing decisions, material choices and code calls the finished system depends on, and the license is the state’s statement that those decisions can be trusted.

North Dakota keeps the examination close to home. There is no testing vendor for this credential and no vendor bulletin to download — the Board administers the examination itself. That single fact shapes everything about preparation. Candidates deal with the Board’s own structure, the Board’s own five-part paper, and the state’s own adopted code, rather than with a national testing company’s standard format. Generic journeyman material written for vendor-delivered examinations in other states describes a different sitting, and candidates who arrive expecting one will misjudge this one from the first part onward.

The companion to this page, the North Dakota Journeyman Plumber Exam Guide, works through the route, the code and the sitting in full detail. This page gives the credential, the examination and the program in one view.

The examination at a glance

ItemVerified position
ProgramNorth Dakota Journeyman Plumber
AdministratorBoard-administered examination — no testing vendor; no vendor bulletin exists for this credential
Code tested2018 North Dakota Plumbing Code — the 2018 Uniform Plumbing Code as adopted by NDAC 62-03.1-01-01; tested edition equals adopted edition
Code exclusionsNorth Dakota does not adopt Uniform Plumbing Code chapters 5, 12–16
Examination structure5 parts in 5 hours; Part 1 is 100 multiple-choice questions, closed book; Part 2 is a drain, waste and vent sizing completion exercise, also closed book; the remaining parts are open book and include water sizing and drain, waste and vent completion items
Passing standard70 percent for the Journeyman Plumber examination; the Master examination standard is 80 percent
Hands-on practicalNone — this examination has no hands-on practical component
RetakeA waiting period of 6 months applies before a retake
Fees (state fees)Application $50; examination $50; Journeyman Plumber license $100; renewal $100
Continuing educationContinuing education is required on a two-year cycle
SupervisionA maximum of 5 apprentices per master or journeyman per project
Administrator notePassProfessor is independent and is not affiliated with the North Dakota plumbing board or regulator
NORTH DAKOTA JOURNEYMAN PLUMBER · EXAM AT A GLANCE
North Dakota Journeyman Plumber
PROGRAM
None — this examination has no hands-on practical component
HANDS-ON PRACTICAL
A waiting period of 6 months applies before a retake
RETAKE
Continuing education is required on a two-year cycle
CONTINUING EDUCATION
Administrator: Board-administered examination — no testing vendor; no vendor bulletin exists for this credential
Code tested: 2018 North Dakota Plumbing Code — the 2018 Uniform Plumbing Code as adopted by NDAC 62-03.1-01-01; tested edition equals adopted edition
Code exclusions: North Dakota does not adopt Uniform Plumbing Code chapters 5, 12–16
Examination structure: 5 parts in 5 hours; Part 1 is 100 multiple-choice questions, closed book; Part 2 is a drain, waste and vent sizing completion exercise, also closed book; the remaining parts are open book and include water sizing and drain, waste and vent completion items
Passing standard: 70 percent for the Journeyman Plumber examination; the Master examination standard is 80 percent
Fees (state fees): Application $50; examination $50; Journeyman Plumber license $100; renewal $100
Supervision: A maximum of 5 apprentices per master or journeyman per project
Administrator note: PassProfessor is independent and is not affiliated with the North Dakota plumbing board or regulator

Board-administered means what it says

Most journeyman candidates in most states schedule through a vendor, study from a vendor bulletin and sit a computer-based test assembled to a vendor blueprint. North Dakota does none of that for this credential. The Board gives the examination itself, which means the route runs through the Board’s application and the Board’s sitting, and the authoritative description of the examination is the Board’s own rule and forms rather than a candidate information bulletin.

Preparation should respect that difference. There is no published vendor blueprint with per-area question counts to reverse-engineer, and this page invents none. What is verified is the architecture — five parts, five hours, a defined split between closed-book and open-book work, and a 70 percent passing standard — and that architecture is demanding enough to organise study around. Candidates who prepare as if they were sitting a single open-book computer test will be caught by the opening parts, where the book is closed and the knowledge has to be in the candidate rather than on the desk.

The code: 2018, as North Dakota adopted it

North Dakota tests what it adopted, and it adopted the 2018 Uniform Plumbing Code as the 2018 North Dakota Plumbing Code under NDAC 62-03.1-01-01. Tested edition and adopted edition are the same edition here, which removes one whole category of error that troubles candidates in states where the examination still runs on an older book than the code in force. The code on the job and the code in the examination room are the same code in North Dakota — with one qualification that matters more than the headline.

North Dakota does not adopt Uniform Plumbing Code chapters 5, 12–16. A candidate who studies the full national text of the 2018 Uniform Plumbing Code as printed will therefore spend time on material the state has set aside, and — worse — may carry provisions from those chapters into answers where North Dakota law does not contain them. The delta is the discipline: learn the 2018 code as North Dakota adopted it, with the excluded chapters recognised as excluded, so that examination answers track state law rather than the unamended model text. Candidates arriving from Uniform Plumbing Code states should note the shape of this adoption carefully; candidates arriving from International Plumbing Code states face the larger task of learning a different model code family altogether, because North Dakota is a Uniform Plumbing Code state and the examination speaks that language throughout.

Five parts, five hours: the shape of the sitting

The Journeyman Plumber examination runs to five parts in five hours, and the parts are not five copies of the same exercise. Part 1 is 100 multiple-choice questions, taken closed book. That is a substantial body of code knowledge examined from memory: definitions, requirements, prohibitions and sizing principles held well enough to answer without turning a page. Part 2 is a drain, waste and vent sizing completion exercise, and it is also closed book — the candidate completes sizing work from knowledge rather than by looking each value up. The remaining parts are open book, and they include water sizing work and further drain, waste and vent completion items, where the skill examined shifts from recall to accurate, efficient use of the code under time.

Read the split as the Board’s theory of the journeyman. Some knowledge a working plumber must simply have — the rules that govern work done daily, in places where stopping to consult a book mid-task is not how the job runs. Other work is properly book work: extended sizing, where the code’s tables and methods are tools to be applied correctly and quickly. The examination tests both, in that order, and preparation that serves only one half serves neither. Closed-book fluency has to be built deliberately, through retrieval practice until core provisions come without prompting; open-book speed has to be built separately, through repeated sizing work against the clock until finding and applying the right table entry is a practised motion rather than a search.

There is no hands-on practical in this examination. No candidate will be asked to assemble pipe, make joints or demonstrate a bench project, and nothing in this program pretends otherwise. The sizing completion parts are the examination’s applied test — written work, done on paper, that stands in for the sizing judgement the field demands. Candidates whose strength is practical should understand that the sitting rewards that strength only as it is translated into written sizing and code answers; candidates whose strength is written should understand that the sizing parts still require the judgement of someone who knows what the numbers describe.

Passing, retaking and the cost of the second attempt

The passing standard for the Journeyman Plumber examination is 70 percent. For ladder context, the Master examination in North Dakota is set higher, at 80 percent, and runs to four parts rather than five — the journeyman sitting is the longer architecture at the lower threshold, and candidates should not carry the Master figures into their own planning.

The retake position deserves plain statement because it changes how seriously the first sitting should be taken. A candidate who does not pass waits 6 months before retaking. Six months is not a scheduling inconvenience; it is half a working year in which the license — and the work, pay and independence that follow it — stays out of reach. That single rule argues for entering the sitting prepared rather than entering it to see what it looks like. There is no cheap reconnaissance sitting in North Dakota. The program described below is built around that reality: thorough preparation first, one well-prepared attempt, and the sizing and recall fluency to make the attempt count.

The state fees are modest and verified. The application fee is $50, the examination fee is $50, the Journeyman Plumber license itself is $100, and renewal is $100. Those are state fees, stated here so candidates can plan the full cost of the route; they are separate from any preparation a candidate chooses.

Holding the license: renewal, education and supervision

Licensure does not end at the passing notice. North Dakota requires continuing education on a two-year cycle for this credential, and renewal carries the $100 renewal fee stated above. Candidates should build the habit the cycle assumes from the start: the code is a living document in the trade’s daily work, and the journeyman who treats the examination as the last time the book is opened will feel the renewal cycle as a burden rather than as the routine it is designed to be.

Supervision runs the other direction as well. North Dakota allows a maximum of 5 apprentices per master or journeyman per project. The journeyman license therefore carries a defined teaching and oversight load from the first project onward: up to five apprentices’ work can rest on one journeyman’s direction on a single project. Examination items about supervision, responsibility and the limits of what apprentices may do are not abstractions in this state — they describe the crew structure the newly licensed journeyman will step into, and the 5-to-1 ceiling is the figure to hold.

What makes this examination demanding

The demand concentrates in three places. First, the closed-book opening: 100 multiple-choice questions plus a closed-book sizing completion exercise mean the examination’s first hours test memory and internalised method, not lookup skill. Second, the sizing work itself: drain, waste and vent sizing appears in both closed-book and open-book forms, so a candidate cannot treat sizing as a single technique — the same judgement is examined with the book shut and with the book open, and weakness shows in either setting. Third, the adoption shape: the excluded Uniform Plumbing Code chapters mean that even a candidate who knows the 2018 Uniform Plumbing Code well must still learn North Dakota’s version of it. Add the 6-month retake wait standing behind any failure, and the examination rewards exactly one strategy — complete preparation, in the state’s own code, before the first sitting.

What the PassProfessor program will cover

Built on the platform architecture: a code core plus a North Dakota delta. PassProfessor plumbing programs in our catalog are composed in layers. The foundation is the model-code core — original practice material written to the Uniform Plumbing Code knowledge a journeyman needs: drainage, venting, water supply and sizing method. Layered over it is the North Dakota delta: the 2018 North Dakota Plumbing Code as adopted under NDAC 62-03.1-01-01, the exclusion of Uniform Plumbing Code chapters 5, 12–16, the Board-administered five-part structure, and the state’s passing, retake and supervision positions. Every item is written from scratch against primary sources.

Preparation matched to the two kinds of parts. The program trains the closed-book parts and the open-book parts as the different exercises they are. Recall work builds the unprompted command of core provisions that Part 1 and the closed-book sizing exercise demand; timed sizing work builds the table fluency and completion speed the open-book parts reward. A candidate who has only ever practised with the book open has not yet practised for North Dakota.

Written-portion scope, stated honestly. This examination contains no hands-on practical, so a written preparation program addresses the whole of what the sitting examines — code questions and written sizing completion work. That scope statement is specific to North Dakota’s architecture and should not be assumed for other states, several of which examine hands-on work that no written program can rehearse.

Independence, stated plainly. PassProfessor is an independent preparation provider, not affiliated with the North Dakota plumbing board or regulator, and this program is not a Board course. Completing it confers no license and no exemption; the Board alone licenses, and candidates apply and sit through the Board’s own channels. The full route is set out in the companion North Dakota Journeyman Plumber Exam Guide.

Tell me when enrollment opens. The North Dakota Journeyman Plumber program is in the works and enrollment is not yet open. Our catalog now includes preparation for journeyman plumber examinations across the country, and this program joins that catalog when it meets the standard described above. Leave an email address and PassProfessor will write to you when the program is ready — and only about this program. No date is promised.

Frequently asked questions

Who administers the North Dakota Journeyman Plumber examination?

The Board administers it directly. There is no testing vendor for this credential and no vendor bulletin; the Board’s own rule and forms are the authoritative description of the route.

What code is the examination based on?

The 2018 North Dakota Plumbing Code — the 2018 Uniform Plumbing Code as adopted by NDAC 62-03.1-01-01. The tested edition is the adopted edition. North Dakota does not adopt Uniform Plumbing Code chapters 5, 12–16.

How is the examination structured?

Five parts in five hours. Part 1 is 100 multiple-choice questions, closed book. Part 2 is a drain, waste and vent sizing completion exercise, also closed book. The remaining parts are open book and include water sizing and drain, waste and vent completion items.

What score passes?

70 percent for the Journeyman Plumber examination. The Master examination standard, for comparison, is 80 percent.

Is there a hands-on practical?

No. The North Dakota Journeyman Plumber examination has no hands-on practical component. Its applied test is written sizing completion work.

What happens if a candidate does not pass?

A waiting period of 6 months applies before a retake. Candidates should plan to sit prepared, because a failed attempt costs half a year.

What are the state fees?

Application $50, examination $50, Journeyman Plumber license $100, and renewal $100. These are state fees, separate from any preparation.

Is continuing education required?

Yes. Continuing education is required on a two-year cycle to hold this credential.

How many apprentices can one journeyman supervise on a project?

A maximum of 5 apprentices per master or journeyman per project.

Is PassProfessor affiliated with the Board?

No. PassProfessor is an independent preparation provider. The Board alone licenses plumbers and administers the examination.

When does enrollment open?

The program is in the works and enrollment is not yet open. Leave an email address on this page and PassProfessor will write to you when the program is ready — and only about this program.