Control carries 19% of the Green Belt exam under the current PeopleCert syllabus. It covers Lean controls (5S sustainment, Kanban, Poka-Yoke, visual management), statistical process control, and Six Sigma control plans. Our bank holds 300 Control questions; these four worked questions are drawn from that bank — including a control-chart limits calculation with the full computation shown — with the correct answer and a full explanation for each.
Worked questions
1. A filler is sampled in subgroups of five, giving an overall mean of 50.0 grams and a mean range of 4.0 grams. With A2 = 0.577, where do the trial limits for the means chart fall?
A. The trial limits put the ceiling at 54.00 grams, with the floor set at 46.00 grams.
B. Subgroup means are bounded above by 52.31 grams and below by 47.69 grams on the chart.
C. Limits of 51.73 grams (top) and 48.27 grams (bottom) govern the plotted means here.
D. Reading the chart upward, the first boundary met is 41.54 grams and the second boundary is 58.46 grams.
Correct: B. The means limits are 50.0 plus or minus 0.577 times 4.0, which is 50.0 plus or minus 2.31, giving 52.31 and 47.69 grams.
2. A characteristic is classed as critical on a medical-device control plan. How should that classification change its row compared with a minor characteristic?
A. It earns exemption from charting, because critical characteristics are assumed stable once validated once.
B. It earns a wider specification, because critical items deserve more room before anyone raises an alarm.
C. It earns monitoring only at final audit, because frequent checks on critical items disturb production.
D. It earns tighter monitoring, often larger or more frequent samples plus a stronger, pre-agreed reaction.
Correct: D. Criticality drives rigour: the more harm a characteristic can do, the more sensitive and responsive its control row must be.
3. An andon light above a sewing station turns red and a cord pull stops the line. What should happen next under a working andon system?
A. The operator waits until the scheduled break, notes the fault on a form, and hands the form to maintenance the following morning
B. The nearest team leader responds at once, helps clear the problem or escalates it, and the stop counts as useful information
C. The light is switched back to green by the operator so the shift output figures are not spoiled by a recorded stoppage
D. Production continues on neighbouring stations and the stopped unit is quietly scrapped so no defect record is created
Correct: B. Andon only works if pulling it brings fast help. A stop that is punished, hidden, or ignored teaches operators to stop signalling problems.
4. A documented control from the project says the team leader checks the torque board hourly and signs it. Signatures appear for hours when the leader was in training off site. What does this falsification destroy?
A. Nothing beyond one day's paperwork, since the torque values themselves were within limits on those days
B. The credibility of the whole control record, because signed-but-unperformed checks mean no record can be trusted
C. Only the leader's appraisal rating, because control records are a personal performance matter rather than a system matter
D. The board's usefulness as a display, though the underlying process control remains completely unaffected
Correct: B. Control records are evidence the system ran. Falsified evidence poisons trust in every other record and hides whether the control operated at all.
A note on format. The real IASSC exam mixes multiple-choice with true/false questions, while PassProfessor’s bank trains you with four-option multiple-choice questions throughout — the same knowledge, in a format that forces you to discriminate between close alternatives. No worked set on this page reproduces the real exam’s item-type mix.
These questions are drawn from the same bank as the full program. Start with the 20 free sample questions (also presented readably on the free sample questions page), read the IASSC Green Belt exam guide, then see the full IASSC Lean Six Sigma Green Belt Exam Prep program — 1,500 original questions covering all five DMAIC phases of IASSC’s Body of Knowledge, with an explanation for every answer, for $59 with 6 months of access.
Disclaimer
PassProfessor is an independent exam-preparation provider. This program is exam preparation only: it is not the real exam, it provides no education credit, and completing it does not by itself qualify you for any license or certification. The real exam is run by its own exam body — you register for it, pay its fees, and sit it through that body, not through PassProfessor. All practice questions in this program are original; they are not actual exam questions.
