Virginia Journeyman HVAC Tradesman Exam Guide: Eligibility First, Then the Shared Portion, Then the License Clock

Virginia licenses HVAC tradesmen through the Board for Contractors in DPOR. Journeyman and Master candidates sit the same 85-item, 210-minute, open-book portion through PSI, and the Journeyman passing score on that portion is 60 — a raw count of correct answers, stated in this guide in that form only. This guide works the credential end to end; the companion program page is at /virginia-journeyman-hvac-tradesman-exam-prep/.

This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.

The credential at a glance

ItemVerified position
ProgramVirginia Journeyman HVAC Tradesman: the individual journeyman tradesman license in the HVAC specialty
RegulatorBoard for Contractors, Department of Professional and Occupational Regulation (DPOR), under 18VAC50-30
Examination vendorPSI Services LLC — bulletin copyright 2026, dated July 23, 2026
PortionThe shared Journeyman/Master HVAC portion: 85 items, 210 minutes, open book
Passing score60 of 85 — a raw count of correct answers, as the bulletin publishes it
Tested codeInternational Mechanical Code, 2021 edition, in its national edition
Adopted codeUniform Statewide Building Code, 2021 edition — a separate layer from the tested code
Credential termThree years; renewal $160 with 3 hours of continuing education for the HVAC designation
Administrator notePassProfessor is independent and is not affiliated with DPOR, the Board for Contractors, or PSI

Virginia’s tradesman system rewards candidates who keep its layers separate. The statute creates the license and the prohibition on unlicensed practice. The regulation at 18VAC50-30 defines the levels, sets the eligibility tables, the fees, the term, and the conduct rules. The PSI bulletin governs the sitting itself — the portion, the book rules, the clock, and the score. The Uniform Statewide Building Code governs the work in the field. Almost every error available to a Virginia candidate consists of looking for a fact on the wrong layer. This guide follows the layers in order.

Reading the verified facts

Three disciplines run through everything that follows. First, the passing score is a raw count. The bulletin publishes a Journeyman passing score of 60 on an 85-item portion, and this guide states it in that form only; any restatement of the score in another form is not a bulletin fact and does not appear here. Second, fees are stated by instrument. What PSI charges for the examination and what the Board charges for the license are separate figures, paid to separate parties, and they are never combined into a single total in this guide. Third, tested and adopted codes are separate layers. The examination keys to the national International Mechanical Code, 2021 edition, as listed; the field is governed by the Uniform Statewide Building Code, 2021 edition. Both layers carry the 2021 mechanical code, and they are still different bodies of law.

The legal frame: Article 3 and 18VAC50-30

Tradesman licensing sits in Title 54.1, Chapter 11, Article 3 of the Code of Virginia, sections 54.1-1128 through 54.1-1135, with the detailed rules in the Individual License and Certification Regulations at 18VAC50-30. A tradesman is an individual who engages in, or offers to engage in, work for the general public for compensation in the electrical, plumbing, and HVAC trades. A journeyman, by the regulation’s definition, is a person with the ability, proficiency, and qualifications to install, repair, and maintain materials and equipment, with working knowledge sufficient to comply with the pertinent USBC provisions and to work according to plans and specifications.

The license-before-work rule dates to July 1, 1995: no individual may engage or offer to engage as a tradesman unless licensed under Article 3, and practising or attempting to practise except as provided in the article is prohibited and constitutes a Class 1 misdemeanor. The rule carries two working carve-outs. Individuals working under the supervision of a tradesman licensed in the specialty being performed are not themselves subject to licensure — no numeric supervision ratio is stated in the sources, and none should be assumed. And a licensee in one specialty need not hold another specialty’s license for work incidental to their own specialty. Article 3 also does not apply to work on floating vessels, or to a single-family residence where the value of the work is less than $250 and the individual does not hold himself out to the general public as a tradesman.

The conduct rules at 18VAC50-30-190 list nineteen prohibited acts for tradesmen, including practising in a specialty for which the tradesman is not licensed, material noncompliance, misrepresentation, aiding or abetting an unlicensed contractor or allowing one’s license to be used by an unlicensed individual, failure to comply with the USBC, and failure to obtain a building permit or an applicable inspection where required. These are not examination decoration: the portion tests the regulation directly, and the list governs the license for its whole life.

The firm side of Virginia contracting is a separate system — Article 1 and 18VAC50-22, with Class A, B, and C contractor licenses issued to business entities — and this guide treats it as a boundary only. One connection matters for orientation: the Board requires a master tradesman license as a condition of licensure for HVAC contractors, so the journeyman credential, on its own, does not qualify a firm’s HVAC classification.

Step one: qualify under the current ladder

Every tradesman applicant must be at least 18 years old, document identification, vocational training, and experience, comply with all Board examination-conduct rules, provide an address of record — a post office box only if a physical address is also provided — and disclose any felony or non-marijuana misdemeanor conviction in any jurisdiction and any action by any licensing body in any jurisdiction. Noncompliance with the conduct rules is itself grounds for denial. An incomplete application process lapses after 12 months, after which the applicant begins again.

The journeyman examination-approval table at 18VAC50-30-39 pairs formal vocational training with practical experience, and any one combination qualifies: a bachelor’s degree in a trade-related engineering curriculum plus 1 year; an associate degree or a certificate of completion from at least a two-year tradesman-related program plus 2 years; 240 hours plus 4 years; 160 hours plus 5 years; 80 hours plus 6 years; 40 hours plus 7 years; or no formal training plus 8 years. Read the table as a trade, not a menu to be averaged: a candidate short on hours cannot borrow from the experience column beyond what a row allows. Up to 40 hours of Board-approved continuing education may count toward formal vocational training, which can move a candidate up a row — worth checking before concluding that a further year in the field is required.

Verification is documentary. Experience is verified by reference letters from building officials, inspectors, employers, contractors, engineers, architects, or clients; education by a transcript or diploma copy. Assemble both before applying, because the Board’s approval — not the examination appointment — is where an incomplete file stops the route.

This table is the only journeyman ladder current copy may state. The regulation’s earlier section, repealed when the current tables took effect, paired the same numbers differently, and older application forms quoting it still circulate; the stale DPOR tradesmen webpage compounds the problem by describing a shorter license term and a shorter reinstatement window than the current regulation provides. Where an older document and 18VAC50-30-39 disagree, the -39 table governs.

Step two: the exemption and recognition routes

One exemption from the journeyman examination is live: completers of an approved apprenticeship program — approved by the Commissioner of the Department of Workforce Development and Advancement — are exempt from the journeyman examination. The same section names two further exemptions tied to dates in 1995 and 1978; both are historical provisions, closed to anyone building a career now. Recognition runs the other way for tradesmen arriving from elsewhere: substantially equivalent licensure is recognised where a substantially equivalent examination was passed, and an out-of-state journeyman or master holder may instead sit for the Virginia examination at the same level. Either way, the level is preserved, not raised.

Step three: Board approval, then PSI

Virginia requires Board approval before testing. Candidates must have satisfactorily completed all Board education and experience requirements before applying for the examination; the Board approves all applications for testing and sends the approval notification. The statute states the sequence in the same order: the satisfactory applicant takes the Board-required examination on general knowledge of the trade, unless exempt, and the license issues on passing. There is no route that begins by booking a PSI appointment and regularises eligibility afterwards, and candidates who schedule their preparation backwards — examination date first, eligibility file second — risk holding an appointment they are not yet approved to use. Examination fees, once paid, are valid for one year from the date of payment, are not refundable, and are not transferable.

The portion in full: 85 items, mapped

The Journeyman/Master HVAC portion contains 85 items to be answered in 210 minutes, open book. Its outline divides into a regulatory block and a trade block. The regulatory block totals 10 items: standards of practice 3, standards of conduct 2, renewal and reinstatement 2, definitions 1, qualification for licensure 1, and revocation of licensure 1. These items are keyed to the tradesman regulations at 18VAC50-30, which is why the regulation itself stands on the reference list for every tradesman examination.

The trade block totals 75 items: warm air heating 8, ventilation systems 8, air conditioning systems 8, duct systems 6, chimneys, flues and vents 6, boilers 5, hot water piping 4, combustion air 4, controls and low voltage 4, fuel oil piping and storage 3, insulation 3, commercial kitchen venting 5, refrigerants 3, refrigerant piping 3, chilled and condenser water piping 3, and firestopping and penetration inspection 2. Three observations organise preparation. The three eight-item systems areas — warm air heating, ventilation, and air conditioning — together carry more weight than any other cluster and reward system-level fluency rather than component trivia. The mid-weight areas cluster around the physical plant a journeyman actually touches: ducts, venting, boilers, piping, and combustion air. And the tail of the outline — refrigerants, insulation, firestopping — is small in count but entirely learnable, the kind of ground a prepared candidate banks while an unprepared one guesses.

In addition to the scored items, one to ten experimental items may be administered. They will not be scored, however they will count against examination time. That sentence, in its current-bulletin form, changes pacing arithmetic: the candidate cannot identify which items are experimental, cannot bank time against them, and must work the full sitting as if every item counts toward both the score and the clock — because every item counts toward the clock. An earlier bulletin stated a different experimental range and the opposite time rule; that form is superseded and should not be used to plan a sitting.

References: what is listed, what is not, and one open question

For the Journeyman/Master HVAC portion, the safe reading of the current bulletin is that the International Mechanical Code, 2021 edition, and Modern Refrigeration and Air Conditioning, 22nd edition, support the portion, alongside the all-tradesman regulatory reference, the tradesman regulations at 18VAC50-30. Code questions are keyed to the IMC 2021. The reference list for this portion contains no fuel gas code, no National Electrical Code — the controls and low-voltage outline area is tested without one — no Virginia mechanical code volume, and no USBC volume, and there is no separate Virginia-amendments reference. Virginia specificity enters the sitting through the regulatory block, not through amended code text.

One entry must be handled exactly as the sources leave it. The bulletin prints NFPA 31, the Standard for the Installation of Oil-Burning Equipment, 2011 edition, inside the block headed for HVAC references, while the parenthetical tags attached to entries in that block name a different trade. The block placement supports treating NFPA 31 as an HVAC reference, and the outline does contain fuel oil piping and storage items; the tags contradict the placement. The question of whether NFPA 31 is an allowed or required reference for this portion is unresolved, and this guide does not resolve it in either direction. The practical consequence is narrow and clear: do not build a study plan, a reference purchase, or a test-centre expectation on NFPA 31 until PSI or DPOR confirms its position, and do not assume its absence either.

The edition rule completes the reference picture. A candidate may use any edition of a reference as it becomes available, but for code questions the examination is based only on the edition of the code book that is listed — IMC 2021. Where references appear to conflict, a legal requirement overrides any other reference, a state-specific legal requirement overrides a national one, and listed-reference information overrides other sources.

Tested code, adopted code: the two-layer discipline

The tested layer is the national IMC 2021, stated outright in the current bulletin; the earlier transition, under which either the 2018 or the 2021 edition could be used before the 2021 edition alone governed, is complete and belongs to history. The adopted layer is the Uniform Statewide Building Code, promulgated by the Board of Housing and Community Development under section 36-98 and codified at 13VAC5-63. The 2021 edition of the USBC took effect January 18, 2024. Its first part, the Virginia Construction Code, incorporates chapters of the 2021 International Building Code, and the codes referenced in that code — including the 2021 International Plumbing Code and the 2021 International Mechanical Code — are part of the incorporation to the extent referenced; Virginia adopted the 2021 model codes as referenced and the 2020 National Electrical Code. The USBC has three parts: construction, existing buildings, and property maintenance.

The discipline is to hold the layers apart even though the mechanical code year matches: examination answers come from the listed national text; field duties — USBC compliance, permits, inspections — come from the adopted code. A state process intends, in time, to move the USBC’s referenced model codes toward the 2024 editions, on a tentative schedule; no examination change flows from that intention unless PSI and DPOR reissue the bulletin, and the examinations remain keyed to the 2021 editions. Treat any claim of a settled 2024 examination or adoption date as unverified.

The sitting: rules that decide sittings

All tradesman examinations are open book, and the book rules are enforced as conduct rules. Candidates bring their own references; none are provided at the test site, and no study guides are permitted. References may be highlighted, underlined, and indexed before the examination, but materials containing writing are not allowed, writing in references during the session is prohibited, and a candidate caught writing in references will have them confiscated and be reported to the Department. Only permanent tabs are allowed. Downloaded references must be spiral-bound, hole-punched in a binder, or stapled in the left-hand corner; loose or unbound papers are not permitted. Preparation of the physical book — tabbed, indexed, free of writing — is therefore part of examination preparation, done days before the sitting, not at the test-centre door.

Scheduling runs online around the clock or by phone, in two delivery formats: test centre or remote proctored. Cancellation or rescheduling without forfeiting the fee requires notice two days before the scheduled date, and a voicemail or email message is not an acceptable cancellation; the fee is forfeited on late cancellation, no-show, late check-in, or improper identification, and candidates must arrive at least 30 minutes before the appointment. At check-in, one valid, non-expired, signature-bearing, government-issued photo ID is required, its legal names matching the registration exactly; military IDs are not accepted for remote testing. At test centres an LCD writing tablet is provided for notes and returned at check-out. Handheld calculators are prohibited, as are all electronic devices; a word-to-word translation dictionary, without pictures or definitions, is allowed. Remote-proctored sittings allow no breaks and no scratch paper, and a candidate who does not start within 15 minutes after the booked time forfeits the fee and eligibility. A tutorial of up to 15 minutes does not count against examination time. Scores display on screen at the end and a report is emailed; a failing report includes a diagnostic report by examination type. A candidate cannot rebook the same day and may retest within two business days depending on space.

The bulletin also contains an internal tension this guide records without resolving: its text speaks of Virginia candidates testing at listed centres, while its own centre list includes centres outside Virginia. No centre count, centre list, or in-state-only claim is stated here; take the centre from your own PSI scheduling confirmation.

Fees, by instrument

The examination fee for the Journeyman HVAC examination is $100, paid to PSI. The Board’s license fees under 18VAC50-30-90 are separate: an original license by examination costs $150, a license without examination $150, a card exchange $110, and an additional designation $105. License fees are nonrefundable, not prorated, and remain active one year from receipt. The regulation also states ceilings on the Board’s examination charge for journeyman and master examinations; those ceilings are caps in the regulation, not fees PSI charges, and are not presented here as amounts a candidate will pay. A tradesman license may not be assigned or transferred, and address changes must be reported in writing within 30 days. No single total cost is published by either party, and none is constructed here.

After passing: the three-year clock

A tradesman license is valid for three years from the date of issuance, and licenses issued to HVAC tradesmen expire three years from the last day of the month in which they were issued — a longer cycle than the two-year term that applies to contractor licenses, and the term current copy must use. The renewal fee is $160, nonrefundable and not prorated. Renewal requires evidence of knowledge of code changes: holders with an HVAC designation must complete 3 hours of continuing education for that designation, relating to applicable building code changes, from a Board-approved provider, as a condition of renewal or reinstatement, covering articles of the current edition of the building code including changes — for HVAC tradesmen, the International Mechanical Code. Holding both the journeyman and master levels in the same trade does not double the hours owed. Providers keep records for a minimum of five years and transmit completions electronically within seven days, and the Board may audit any approved course. Failure to receive a mailed notice does not relieve the renewal duty, and the Board’s date of receipt, not the postmark, determines renewal against reinstatement.

If renewal requirements are not completed within 30 days of expiration, reinstatement is required, at a fee of $210, which includes the $160 renewal fee. Reinstatement is available up to 24 months after expiration. Beyond that window, the individual must apply again, meet all current entry requirements, and will be deemed eligible to sit for the examination for the same category and specialty as the expired license. A reinstated tradesman keeps the same license number, the expiration runs three years from the previous expiration, and the licensee is regarded as continuously licensed. Practising on an expired license may be treated as unlicensed activity. There is no inactive or retired tradesman status; the former inactive provisions were repealed effective October 1, 2024, and the form still linked from older web pages is a dead route.

A study plan built on the portion as published

Sequence preparation by weight and by layer. First, the three eight-item systems areas — warm air heating, ventilation, and air conditioning — studied as systems, because the items reward candidates who can follow a fault across components. Second, the mid-weight plant: ducts, chimneys and vents, boilers, hot water piping, and combustion air, where lookup speed decides outcomes. Third, commercial kitchen venting, a self-contained five-item area residential-background candidates most often neglect. Fourth, the regulatory block: ten items drawn from a short regulation the candidate can read entire, more than once — the highest-yield reading in the syllabus. Fifth, the tail: refrigerants, piping, chilled and condenser water piping, insulation, and firestopping, small counts that are fully learnable. Throughout, practise open-book retrieval under time: the skill examined is not only knowing, but finding — locating the governing provision in a tabbed, indexed, writing-free reference, reading it exactly, and moving on inside a 210-minute budget that experimental items also consume.

The errors this examination is built to catch

Layer errors dominate. Restating the raw passing score in another form, or trusting a secondary source’s rounder figure, misstates the one number the candidate most needs exact. Treating a Virginia field amendment as an examination answer crosses the tested and adopted layers in the wrong direction. Relying on a repealed eligibility table, or on the stale webpage’s shorter term and reinstatement window, builds a plan on closed rules. Assuming NFPA 31’s reference position is settled — in either direction — builds on a conflict the bulletin itself contains. Arriving with removable tabs, written-in references, loose printouts, or a handheld calculator converts a knowledge test into a conduct failure before the first item appears. And treating the regulatory block as an afterthought forfeits a tenth of the paper that a single careful reading of a short regulation would have secured.

Virginia in one view

Virginia in one view is a tradesman framework with clean joints: a statute that prohibits unlicensed practice and creates the levels, a regulation that defines and prices them, a bulletin that examines journeyman and master candidates on a single shared portion at different raw passing scores, a national mechanical code tested exactly as listed, and a statewide building code that governs the work afterwards without rewriting the examination. The journeyman who understands which layer each fact lives on — eligibility at the Board, mechanics at PSI, conduct in the regulation, compliance in the USBC — holds the map this credential is drawn on. The companion program page is at /virginia-journeyman-hvac-tradesman-exam-prep/.

Frequently asked questions

What exactly do Journeyman candidates sit?

The shared Journeyman/Master HVAC portion through PSI: 85 items, 210 minutes, open book, under the bulletin copyright 2026, dated July 23, 2026.

What is the passing score, stated exactly?

A Journeyman passing score of 60 on the 85-item portion — a raw count of correct answers, as the bulletin publishes it. This guide states it in no other form.

What are the ten regulatory items about?

Standards of practice, standards of conduct, renewal and reinstatement, definitions, qualification for licensure, and revocation of licensure — keyed to the tradesman regulations at 18VAC50-30.

Which code edition is tested, and which governs field work?

The examination keys code questions to the national International Mechanical Code, 2021 edition. Field work is governed by the Uniform Statewide Building Code, 2021 edition. The layers are separate.

Is NFPA 31 a reference for this examination?

Unresolved in the sources. The bulletin prints the entry inside the HVAC reference block while the tags attached to entries in that block name a different trade. Confirm with PSI or DPOR; this guide resolves it in neither direction.

Can I write in my code book during the examination?

No. References may be highlighted, underlined, and indexed beforehand, but materials containing writing are not allowed, writing during the session is prohibited, and only permanent tabs are permitted.

How long is the license valid, and what renews it?

Three years. Renewal costs $160 and requires 3 hours of Board-approved continuing education for the HVAC designation covering applicable code changes in the International Mechanical Code.

What if my license has already expired?

Within 30 days, complete renewal. After that, reinstatement at $210 is available up to 24 months after expiration. Beyond 24 months, apply again under current requirements and sit the examination for the same category and specialty.

Is PassProfessor affiliated with DPOR, the Board, or PSI?

No. PassProfessor is an independent preparation provider, not affiliated with DPOR, the Board for Contractors, or PSI. The Board alone licenses tradesmen.

When does enrollment open for the PassProfessor program?

The program is in the works and enrollment is not yet open. Leave an email address on this page and PassProfessor will write to you when it is ready — and only about this program.