Texas ACR Contractor — Commercial Refrigeration Class A Exam Guide: One Combined Endorsement, Read in Full

The Texas ACR Contractor — Commercial Refrigeration Class A license carries the endorsement the statute names in full — Commercial Refrigeration and Process Cooling or Heating — at the class with no size limit. Its PSI examination runs 120 scored items plus 5 non-scored items in 230 minutes plus 10 minutes, open book, referenced from September 1, 2026 to the 2024 mechanical, fuel gas, and uniform mechanical codes — and the rule states the standard in one sentence: “A passing grade is 70%.” This guide works through the combined endorsement’s two halves, its process boundaries, the eligibility gate, the sitting, and the layers a cold-side contractor must keep apart.

This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.

The credential at a glance

ItemVerified position
ProgramTexas ACR Contractor — Commercial Refrigeration Class A
Endorsement (full statutory name)Commercial Refrigeration and Process Cooling or Heating — a single combined endorsement, code R (C = Combined with environmental)
RegulatorTexas Department of Licensing and Regulation (TDLR), under Texas Occupations Code Chapter 1302 and 16 TAC Chapter 75
ScopeClass A — any size unit, no size limit (§ 1302.253(b))
VendorPSI Services LLC, scheduling only after TDLR approves eligibility; Candidate Information Bulletin © 2026, updated July 9, 2026
Examination120 scored items + 5 non-scored items / 230 minutes + 10 minutes / open book, computer-based
Passing standard“A passing grade is 70%” — 16 TAC § 75.21(b), verbatim
Tested editionsEffective September 1, 2026: 2024 International Fuel Gas Code, 2024 International Mechanical Code, 2024 Uniform Mechanical Code
Fees, by layerTDLR application $115. PSI examination $74. Renewal $65 per 1-year term, late at the published multipliers
Insurance (Class A)$300,000 per occurrence / $600,000 aggregate / $300,000 products and completed operations aggregate
Continuing education8 hours per renewal, including 1 hour of Texas law and rules
Administrator notePassProfessor is independent and is not affiliated with the Texas Department of Licensing and Regulation

The companion program page is at /texas-acr-contractor-commercial-refrigeration-class-a-exam-prep/. This guide is the deeper document: it separates what this credential most often has merged for it — the endorsement’s two halves from a fictitious pair of licenses, scored items from non-scored items, tested codes from applicable codes from municipal codes, primary loops from secondary loops, and each dollar layer from the others.

One endorsement: the naming discipline

A contractor license must be endorsed with one or both of an environmental air conditioning endorsement and a commercial refrigeration and process cooling or heating endorsement (§ 1302.254(a)). The second of those is a single endorsement with a compound name. TDLR’s application page lists “Commercial Refrigeration” and “Process Cooling or Heating” as separate descriptive items — a description of the work, not a division of the credential. The statute and rule codes combine them into the single R endorsement; a holder of both endorsements carries code C. The license number’s form — title, class, number, endorsement code — records the combination on its face.

The practical consequence runs in both directions. A candidate may not prepare for “the refrigeration half” as though a narrower R examination existed: the examination taken depends on the class and endorsements selected on the application, and the R endorsement is selected whole. Equally, no one should roster, sell, or study toward a separate Texas process-cooling contractor credential — none is created by these sources. This guide therefore treats the two defined halves as scope, and the single endorsement as the license.

Commercial refrigeration (§ 1302.002(6)): the use of mechanical or absorption equipment to control temperature or humidity to satisfy the intended use of a specific space. The definition is use-driven — the cold serves the space’s purpose: storage, display, preservation, preparation. Process cooling or heating (§ 1302.002(15)): controlling temperature, humidity, or cleanliness solely for production requirements or the proper operation of equipment. The definition is process-driven — the condition serves the making, not the occupants. Set against the environmental definition — air treated to meet human comfort requirements — the three definitions partition the Texas HVAC world by what the controlled condition is for: people, product in a space, or production itself. Nearly every scope question in this endorsement is answered by returning to that partition.

Class then fixes scale. Class A allows work on any size unit — no size limit (§ 1302.253(b)), and performing or offering work outside the license’s classification or endorsement is a violation. The license term is 1 year and licenses are not transferable; a contractor holding endorsements of different classes receives a separate license number for each endorsement with concurrent expiration dates on a single document, and may hold only one endorsement per license, both under the same business affiliation and addresses (§ 75.22(e)–(f)).

The process boundary: loops, cryogenics, and the disconnect

The rules bound process work with engineering precision (§ 75.100(d)). Process cooling or heating does not include cryogenic work. It is limited to piping and equipment in the primary closed-loop portions of processing systems containing a primary process medium. The licensing boundary then runs through the system itself: after a licensee has deactivated and rendered inert a primary closed-loop system, an unlicensed person may perform maintenance, service, and repairs on the secondary open-loop components. Read that sequence carefully — the unlicensed opening exists only after the licensee’s deactivation work, and only on the secondary side. A contractor who staffs a process job without that sequence in mind misassigns both legal responsibility and physical risk.

Wiring draws a second, endorsement-specific line. Generally, licensees may install and service control wiring of 50 volts or less; but commercial refrigeration control wiring of any voltage may be installed by a licensee holding this endorsement, if on the equipment side of the disconnect (§ 75.100(a)(3)). The permission belongs to the endorsement and to the equipment side of the disconnect — neither half of the condition may be dropped. At the scheme’s other edges: fuel-gas piping by a licensee is limited to the portion between the appliance and the existing piping system, connected at an existing shut-off valve, with existing piping, stops, and valves unaltered; system testing may be performed without a contractor license while system balancing requires one; and equipment exemptions include residential refrigerators, freezers, and ice machines (§ 1302.058; § 75.30(a)(5)) — an exemption line that removes small residential appliances from the scheme, not a grant of commercial scope.

The gate: the contractor route, whole

No endorsement-specific experience gate for the R endorsement is stated in any source retrieved; the Texas contractor gate governs this program entire. The applicant must be at least 18 years old (§ 1302.255(a)(1)) and satisfy one experience route: at least 48 months of practical ACR-related experience under the supervision of a licensed ACR contractor in the preceding 72 months (§ 1302.255(a)(2)(A)), or a technician certification held for the preceding 12 months plus at least 36 months of practical experience under a licensed contractor in the preceding 48 months (§ 1302.255(a)(2)(B)). Equivalent out-of-state experience or licensure may be credited as the executive director determines (§ 1302.255(a-1)).

Education and training convert at fixed rates (§ 1302.255(c)–(e)): a 4-year degree or diploma in air conditioning, refrigeration, or mechanical engineering or technology counts as 24 months; a 2-year associate degree, diploma, or certification program primarily focused on ACR work counts as 12 months — the institution holding a Texas Higher Education Coordinating Board certificate of authority or an approved equivalent; every 2,000 hours of apprenticeship on-the-job training counts as 12 months; and verified military ACR training and experience, and specified governmental-entity ACR experience, also qualify. Experience is documented on an Experience Verification Form completed by the supervising person(s) — never the applicant — and TDLR conducts a criminal history background check on all applicants.

Completion mechanics (§ 75.20(a)): the approved-form application; eligibility satisfied as of the filing date (§ 75.21(a)); the examination passed; required fees submitted; and proof of insurance under § 75.40 submitted after passing. All requirements, including passing the examination, must be completed within 1 year of the application filing date. Scheduling opens only after TDLR approves eligibility and PSI issues its eligibility notice. The four contractor examinations PSI offers correspond to the class-and-endorsement combinations on the application — the sitting a candidate faces is the one their application selects, which is one more reason the endorsement is chosen whole and chosen carefully.

The sitting: counts, time, books, conduct

PSI delivers the examination by computer under its Candidate Information Bulletin, © 2026, updated July 9, 2026. Structure, kept split as published: 120 scored items plus 5 non-scored items, the non-scored items unscored with extra time allotted; 230 minutes for the scored examination, plus 10 minutes for the non-scored items. No merged total is printed for either measure.

The sitting is open book under strict handling: only references on the PSI Examination Reference Material List, candidate-supplied; highlighting, underlining, and notes permitted before the session; permanent index tabs only; no writing or marking during the session; no temporary or homemade tabs; no additional loose or adhered paper. The technical references verified for this examination are Modern Refrigeration and Air Conditioning, 22nd edition, 2025, and the ADI Duct Size Calculator. Material referenced for the environmental examinations is not carried into this list: the record states those references for those examinations, and transferring them across endorsements would misdescribe the room this candidate sits in.

On the day: arrive 30 minutes early; present one valid government-issued photo identification matching the TDLR eligibility record; calculators limited to non-programmable, silent, battery-operated models without paper-tape printing or an alphabet keyboard. The score shows on screen immediately; an official score report is printed at the site; a candidate who does not pass receives a diagnostic report by subject area. All ACR examinations are available in English and Spanish at no additional cost. The sourced examination is computer-based; no hands-on or drawing component is stated in any source retrieved, and this guide claims neither its presence nor a verified absence beyond that record.

The outline this guide does not print

This guide prints no content outline for this examination — no subject weights, and no Texas Laws and Rules count. That is a deliberate accuracy position, stated plainly so no reader mistakes the silence for an oversight: no Commercial Refrigeration outline cell appears in the Texas fact record this package is built from, and whether a Texas Laws and Rules subject area sits inside the Commercial Refrigeration examinations — and if so at what count — is not verified in that record. The laws-and-rules counts verified for the environmental examinations belong to those examinations and are not transferable across endorsements, any more than their additional references are. Texas sets no separate Business and Law examination for ACR contractors as a structure; what portion of this sitting any subject occupies is a question the current PSI outline answers and this record does not, and preparation should be organised by the verified anchors instead: the endorsement’s definitions and boundaries, the reference list, the tested editions, and the licensing rules themselves. The passing standard, at least, needs no outline — the rule states it, and this guide states it only in the rule’s words: “A passing grade is 70%” (16 TAC § 75.21(b)).

Three code layers, kept apart

Tested. From the PSI bulletin banner, verbatim: “Effective September 1, 2026, the examinations will be referenced to the 2024 International Fuel Gas Code, the 2024 International Mechanical Code, and the 2024 Uniform Mechanical Code” — stated for the ACR examinations generally, including this one. Both mechanical codes stand in the tested trio alongside the fuel gas code, all in 2024 editions from that date. Preparation keys here, and only here.

Applicable. Rule § 75.110’s applicable codes were the 2021 editions — residential, mechanical, fuel gas, and uniform mechanical — for work from September 1, 2024 through August 31, 2026, and are amended to the 2024 editions effective September 1, 2026. The pre-amendment framing in which the examination’s editions ran ahead of this layer is a snapshot of that interval, not a permanent feature of the scheme.

Municipal. The practice standard in a municipality is the code that municipality adopted by ordinance; where no code has been adopted, § 75.100(e)(2) supplies defaults — residential defaults from the residential, fuel gas, and energy codes; commercial defaults from the uniform-or-international mechanical code with the fuel gas and energy codes. Cold-side work — a plant room here, a grocery retrofit there — is permitted and inspected inside this layer. Earlier edition listings in older bulletin material are superseded, are not restated in this guide, and are no basis for preparation. Federal EPA Section 608 technician certification, finally, is a separate federal credential with its own PassProfessor program; no source retrieved makes it a condition of this state license.

Dollars, insurance, renewal, retakes — each at its layer

Application layer: TDLR contractor application fee $115. Examination layer: PSI fee for this examination $74; cancellation or rescheduling without forfeiture requires notice 2 days before the scheduled date; late arrival, a missed sitting, a late cancellation, or lack of proper identification forfeits the fee. Renewal layer: on-time renewal $65 for the 1-year term; late renewal at 1.5 times the fee when expired 90 days or less, 2 times when expired more than 90 days but less than 18 months, and 2 times with executive director approval when expired at least 18 months but less than 3 years (Occupations Code § 51.401; 16 TAC § 60.83). No ACR contracting on an expired license. No combined cost figure is printed: the layers are separate payments, and merging them misstates each.

Insurance — Class A levels, in the Class A package. Commercial general liability maintained at all times during the license period: $300,000 per occurrence (combined property damage and bodily injury), $600,000 aggregate, and $300,000 aggregate for products and completed operations (16 TAC § 75.40(a)). Proof is submitted after passing the examination, per the completion sequence. A licensee who does not contract with the public may request a written insurance waiver, and then may not perform or offer ACR contracting with the general public (§ 75.40(e)–(f)).

Continuing education. Renewal requires 8 hours of department-approved continuing education, including 1 hour of Texas law and rules (§ 75.25(b)) — completed within the term of the current license for a timely renewal, or within the 1-year period immediately prior to the renewal date for a late one (§ 75.25(c)); no credit for the same course twice; the completion certificate retained 1 year. Begin renewal 30 to 60 days before expiration.

Retakes. Scheduling a retake with PSI opens within 24 to 48 hours of a failed examination; retakes are unlimited through the eligibility period — until the application expires, 1 year from submission — after which a fresh application is required.

Errors this guide exists to prevent

Splitting the endorsement. There is no separate process-cooling license, examination, or preparation track in this record; the R endorsement is one credential with a compound name. Importing the environmental outline or references. Counts and manuals verified for the environmental examinations do not describe this sitting, in either direction. Dropping half a boundary condition — process work is primary-closed-loop only and never cryogenic; the any-voltage wiring permission holds only on the equipment side of the disconnect; unlicensed secondary-loop work opens only after a licensee has rendered the primary system inert. Merging the counts or the times — 120 scored plus 5 non-scored, 230 minutes plus 10. Collapsing the three code layers, or preparing from a superseded edition listing. Completing the verification form oneself, missing the one-year completion clock, or sending insurance proof before passing. Quoting the other class’s insurance figures as this class’s. And treating the residential-appliance exemption as scope — it is an exemption line at the scheme’s small end, nothing more.

Texas Commercial Refrigeration Class A in one view

In one view, this credential is the cold side at full scale: one combined endorsement defined by product, space, and production rather than by occupant comfort; boundaries drawn through loops, disconnects, and exemptions; a full contractor gate with convertible education; a single open-book sitting whose contents this guide describes only as far as the record verifies; code editions held in three layers; and a yearly renewal against eight hours of education and Class A insurance levels. The candidate who keeps the endorsement whole, the layers apart, and the boundaries exact is studying the license Texas actually issues. The companion program page at /texas-acr-contractor-commercial-refrigeration-class-a-exam-prep/ describes the PassProfessor program built on that design.

Tell me when enrollment opens. The Texas ACR Contractor — Commercial Refrigeration Class A program is in the works and enrollment is not yet open. Leave an email address and PassProfessor will write to you when the program is ready — and only about this program.

Frequently asked questions

Why does the endorsement have two names?

Because it is one endorsement with a compound statutory name: Commercial Refrigeration and Process Cooling or Heating (§ 1302.254(a)), code R. Descriptive listings that separate the phrases do not split the credential.

What is the difference between commercial refrigeration and process cooling or heating?

Commercial refrigeration controls temperature or humidity for the intended use of a specific space (§ 1302.002(6)). Process cooling or heating controls temperature, humidity, or cleanliness solely for production requirements or the proper operation of equipment (§ 1302.002(15)). Both sit inside the single R endorsement.

How many items, and how long?

120 scored items plus 5 non-scored items; 230 minutes for the scored examination plus 10 minutes for the non-scored items — published split, stated split.

What score passes?

The rule states it verbatim: “A passing grade is 70%” (§ 75.21(b)).

Why is no outline printed for this examination?

No Commercial Refrigeration outline appears in the Texas fact record — including whether any Texas Laws and Rules area or count sits in this exam. Nothing is borrowed from the environmental examinations.

Where does process work stop?

At cryogenic work, which is excluded, and at the primary closed loop: the endorsement reaches piping and equipment in the primary closed-loop portions of processing systems. Secondary open-loop work opens to unlicensed persons only after a licensee has deactivated and rendered the primary system inert.

What does it cost, layer by layer?

TDLR application $115. PSI examination $74. Renewal $65 per 1-year term, late at 1.5 or 2 times the fee on the published schedule.

What insurance does Class A require?

$300,000 per occurrence, $600,000 aggregate, and $300,000 aggregate for products and completed operations (§ 75.40(a)), with proof submitted after passing the examination.

If I fail, how soon can I sit again?

Retake scheduling opens within 24 to 48 hours, with unlimited retakes through the eligibility period — 1 year from application submission.

Is PassProfessor affiliated with TDLR or PSI?

No. PassProfessor is an independent preparation provider. TDLR alone licenses and approves eligibility, and PSI delivers the examinations.

When does enrollment open for the PassProfessor program?

The program is in the works and enrollment is not yet open. Leave an email address on this page and PassProfessor will write to you when the program is ready — and only about this program.