Oklahoma licenses its Mechanical Contractor — HVAC/R through the Oklahoma Construction Industries Board under the Mechanical Licensing Act. The contractor examination is one examination in two parts — trade and Mechanical Business and Law — and the trade part is served in two forms: Unlimited, 90 questions in 240 minutes, and Limited, 80 questions in 210 minutes for work limited to 25 tons cooling and 500,000 Btu/h heating, each passing at 70 percent. This guide works through the credential, the route, and both sittings in full. Its companion program page is the Oklahoma Mechanical Contractor — HVAC/R program page at /oklahoma-mechanical-contractor-hvacr-exam-prep/.
This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.
The credential at a glance
| Item | Verified position |
|---|---|
| Program | Oklahoma Mechanical Contractor — HVAC/R: both trade forms (Unlimited and Limited), plus the Mechanical Business and Law part |
| Regulator | Oklahoma Construction Industries Board (CIB), 2401 NW 23rd St Suite 2F, Oklahoma City, under the Mechanical Licensing Act, 59 O.S. Chapter 43A, and OAC Title 158, Chapter 50 |
| Examination vendor | PSI, under the Candidate Information Bulletin effective September 11, 2026; the CIB determines eligibility |
| Unlimited trade form | 90 questions, 240 minutes, open book; 70 percent = 63 of 90 |
| Limited trade form | 80 questions, 210 minutes, open book; 70 percent = 56 of 80; scope at or below 25 tons cooling and 500,000 Btu/h heating |
| Business and Law part | 50 questions, 120 minutes, open book; 70 percent = 35 of 50 |
| Tested codes | International Mechanical Code and International Fuel Gas Code, 2018 or 2024 with Oklahoma Revisions, on the transition dates stated in this guide |
| Adopted codes | International Mechanical Code and International Fuel Gas Code 2024 editions with Oklahoma amendments, effective September 14, 2026 |
| Administrator note | PassProfessor is independent and is not affiliated with the Oklahoma Construction Industries Board |
The Oklahoma system in its layers
Oklahoma’s mechanical licensing runs on four documents, and a candidate who keeps them in their places will not be tripped by the places where they differ. The Mechanical Licensing Act, 59 O.S. Chapter 43A, creates the licensing regime. The Board’s rules at OAC Title 158, Chapter 50 carry the categories and duties (158:50-5-2), examinations and experience (158:50-9-1), fees (158:50-9-2), duration and renewal (158:50-9-3), apprentices (158:50-9-5), reciprocity (158:50-9-6), and continuing education (158:50-9-7). The PSI Candidate Information Bulletin for the State of Oklahoma — Electrical, Mechanical, Roofing, and Plumbing Examinations, effective September 11, 2026, carries the sittings themselves. The adopted-code layer — what Oklahoma law applies in the field — is set by the state’s building code adoption process and is stated in this guide as its own layer, never merged with the tested layer even where the editions now coincide.
One caution belongs at the front of any Oklahoma study plan. That bulletin serves four trades, and figures move between trades in careless secondary material. The standard that matters for mechanical work is the mechanical standard stated in this guide. A passing figure remembered from the plumbing pages of the same bulletin does not apply to a mechanical sitting, in either direction.
The credential: contractor, journeyman, and the category system
A contractor plans, contracts, supervises, or furnishes labor or materials, beyond performing the work itself, and shall only be associated with and responsible for one mechanical firm, branch offices permitted. A journeyman performs mechanical work within a licensed category without direct supervision, but contracts work only through a contractor. Journeymen are examined on the trade only; the Business and Law portion belongs to the contractor examination, and journeyman examinations are separate programs outside this guide’s scope.
The HVAC/R category is served in two forms. Unlimited covers installing, maintaining, repairing, servicing, and altering complete heating, ventilating, air conditioning, or refrigeration systems unlimited in horsepower or tons; in rule terms the category reaches any cooling or heating including process piping, natural gas piping, refrigeration, and sheet metal, and the Board’s application requires Unlimited experience to be certified above 25 tons and 500,000 Btu/h. Limited covers the same systems limited to 25 tons cooling and 500,000 Btu/h heating; in rule terms, ventilation (duct) systems and cooling including process piping at or below 25 tons, heating including process piping at or below 500,000 Btu per hour per appliance, natural gas piping, refrigeration, and sheet metal. The per-appliance wording of the heating cap is part of the rule category, and candidates should hold it exactly.
Stand-alone categories — Refrigeration, Sheet Metal, Natural Gas, and Process Piping — are each taken by a separate examination and are separate programs. Nothing in this guide builds their content; they are named here only so a candidate holding or seeking one of them does not mistake this program for theirs.
An active contractor has met the bond and insurance requirements. An inactive contractor has met all licensing requirements but is not performing mechanical work — no bond or insurance is required while inactive — and is regulated as a journeyman. That active/inactive distinction returns at the end of the examination route, because the license that issues on passing both parts is inactive until the proofs arrive.
The route, step by step
Step one — qualify. Be 18 or older and assemble verifiable experience under the framework in the next section, on the contractor standard: the journeyman requirements plus one additional year.
Step two — apply to the Board. The Construction Industries Board determines eligibility and approves the applicant, who then schedules with PSI. Application, application fee, examination fee (unless paid directly to the provider), and initial license fee must be received no less than three working days before the examination date. The application fee is forfeited if the applicant fails to meet minimum qualifications. Eligibility approval has no expiration date in the PSI layer — distinct from the three-year window in step three.
Step three — pass both parts within three years. A contractor applicant who passes only one portion need retake only the failed portion if done within three years of approval or eligibility; otherwise both portions must be retaken. A passing trade portion may instead be applied to a journeyman license in the same category if the journeyman application and fees are received no more than one year after passing. A current contractor pursuing additional categories need not retake Business and Law if previously passed.
Step four — activate. On passing both parts, an inactive license issues. It becomes active when the Board receives the $5,000 corporate surety bond and the certificate of insurance evidencing at least $50,000 of commercial general liability coverage, each as specified in the fees and activation section below.
Step five — hold. Renew annually by the birth-month deadline, complete six hours of continuing education every three years, and observe the retake and reinstatement rules stated below.
Experience: the framework and the substitution ladder
Verifiable experience means mechanical experience employed by a licensed mechanical contractor, or a Committee-approved means, including United States military service. One year equals 2,000 hours. Experience gained in Oklahoma requires the apprentice to hold a Board apprentice registration for that period; experience obtained while unregistered does not count, except experience lawfully obtained under applicable federal or state law. The experience affidavit must be signed and notarized by a certifier with personal knowledge — experience is proved by a person who knows it, not asserted by the applicant alone.
The journeyman routes at OAC 158:50-9-1(b)(1) set the ladder. Route (A) is three years of verifiable experience in the category. The Committee-approved education substitutions trade program hours against experience at fixed steps: route (B), a 1,000-hour-or-more approved program plus one year of experience; route (C), 500 or more hours plus two years; route (D), 375 or more hours plus two and a quarter years; route (E), 334 or more hours plus two and a third years; route (F), 250 or more hours plus two and a half years. Route (G) is equivalent verifiable United States military experience. Route (H) is the special certification required for the category. Route (I) allows a current good-standing out-of-state license meeting routes (A) through (F) to expedite processing or support reciprocity. The contractor delta is then a single sentence: a contractor applicant must meet the journeyman requirements plus one additional year — four years in total on route (A), and the same additional year on each substituted route. Candidates should read the ladder as hours-plus-experience pairs, never as hours alone: no route on the list is education without experience.
The trade sittings in detail
Both trade forms are open book, as are all mechanical examinations in the bulletin. Candidates bring their own references; highlighting, underlining, and indexing beforehand is permitted, writing in references before or during the exam is not, and tabs must be permanent.
The Unlimited form is 90 questions in 240 minutes. The Limited form is 80 questions in 210 minutes. The passing standard for each is published in the same dual form: 70 percent, with the raw count printed beside it — 63 of 90 for Unlimited, 56 of 80 for Limited. Percentages are the published form in Oklahoma, and the raw counts are printed with them; this guide states the standard in exactly that published form and no other. No scored-versus-pretest split and no numeric pretest count is published for either form; the bulletin’s general section states only that experimental, unscored items may be embedded, and no pretest number may be stated for these sittings.
The outlines share six domains. Unlimited, as read: Natural Gas 12; Air Distribution Systems 25; Refrigeration and Air Conditioning Systems 20; and Electrical Knowledge and Controls, Heating Systems, and Safety together as a combined residual of 33. Limited, as read: Natural Gas 12; Air Distribution Systems 15; Refrigeration and Air Conditioning Systems 20; and Electrical, Heating, and Safety together as a combined residual of 33. The individual split of either residual is a derived figure in the research record, not a read figure, and it is fenced: no part of this guide or the companion program depends on it, and candidates should plan against the combined figure. What the read figures do establish is the shape of each sitting — air distribution dominates the Unlimited form and recedes on the Limited form, while natural gas and refrigeration and air conditioning systems hold constant across both.
Both served portions are written, multiple-choice examinations with no practical or drawing component, as the Oklahoma specification for these examinations states expressly. Exam-day mechanics from the bulletin: arrive 30 minutes early; present one valid signature-bearing photo identification; a silent, non-printing, non-programmable calculator is permitted. Retake waits are 30 days after a first failure and 90 days after every failure from the second onward. Examination misconduct — cheating, impersonation, improper conduct — brings expulsion, an invalid exam, and disqualification from retaking for not less than 30 and not more than 365 days, as determined by the Board’s Administrator.
The Business and Law part, at its sourced depth
The Mechanical Business and Law part is 50 questions in 120 minutes, open book, passing at 70 percent — 35 of 50. Its references are the Board’s Unofficial Administrative Rules and Courtesy Exam Study Aids Book (current edition), the Mechanical Licensing Act, OAC Title 158 Chapter 50, the Board’s Fine Schedule at OAC Title 158 Chapter 10, the Oklahoma Lien Law at 42 O.S. Chapter 3, the NASCLA Contractors Guide to Business, Law and Project Management, Basic 14th Edition, and the Oklahoma Workers’ Compensation Act or its statutory excerpts. The Fine Schedule’s role as a reference and examination subject is established; no specific fine dollar amount is stated in this guide, because the schedule itself was not read first-hand in the sources behind it.
Its outline has eight topics. Five counts are read and may be stated individually: Project Management and Supervision 7; Contracts 5; Financial 8; Risk Management 4; Licensing Requirements 6. The individual counts for Bidding and Estimating, Labor and Personnel, and Payroll and Payroll Taxes could not be read individually; their combined residual is 20, and this guide states them only as that combined figure. One boundary bears repeating at guide depth: the plumbing Business and Law examination in the same bulletin is a different examination for a different trade, with a different passing standard. Nothing from that examination’s standard is imported into this guide, and candidates comparing notes across trades should expect the figures to differ.
References and the transition, layer by layer
For all HVAC/R examinations the tested references are: the ACCA Ductulator; the International Mechanical Code, 2018 or 2024, with Oklahoma Revisions; the International Fuel Gas Code, 2018 or 2024, with Oklahoma Revisions; Modern Refrigeration and Air Conditioning, 20th, 21st, or 22nd editions, or Refrigeration and Air Conditioning Technology, 5th edition (2005); Manual N, 5th edition (2008), on the contractor lists; Mathematics for Plumbers and Pipefitters, 8th edition; and OSHA 29 CFR Part 1926. NCCER HVAC Books 1–4 are additionally allowed but were not used in examination development. The reference list carries its own sunsets, and each carries its date: the 22nd edition of Modern Refrigeration became usable August 13, 2026; the 20th edition of Modern Refrigeration and the 5th edition (2005) of Refrigeration and Air Conditioning Technology are no longer allowed starting November 1, 2026. A candidate carrying the 20th edition into a sitting after that date is carrying a barred book.
The code transition note is printed in the bulletin for each code-alternating list, in the same words: starting September 14, 2026 the 2024 code can be used; as of December 14, 2026 the 2018 code will no longer be used or allowed. The tested layer therefore has three phases. Before September 14, 2026, the examination keyed to the 2018 editions with Oklahoma Revisions. From September 14, 2026, the 2024 editions may be used alongside the 2018 editions. After December 14, 2026, the 2018 editions are no longer used or allowed, and the durable tested key is the International Mechanical Code and International Fuel Gas Code 2024 editions with Oklahoma Revisions only. Material in the PassProfessor program keys to the 2024 editions, and no item depends on a provision that exists only in the 2018 editions or that differs between 2018 and 2024.
The adopted layer is separate. Oklahoma’s adopted field codes are the International Mechanical Code and International Fuel Gas Code 2024 editions with Oklahoma amendments, effective September 14, 2026 — an adoption that moves from the 2018 editions directly to 2024, skipping the 2021 editions. From September 14, 2026 the tested and adopted editions coincide; before that date, and in principle at any future change, they are different instruments answering different questions — what the sitting keys, and what the field enforces.
Fees and activation, in their separate layers
The vendor layer is PSI’s: $92 per examination portion, nonrefundable and nontransferable. The rule layer states the mechanism: the Board or its designated representative may collect the actual cost of the examination, posted at the testing site, the unit testing fee being the negotiated amount within the statutory cap. The PSI-charged amount — $92 — is the operative candidate figure, and it is a separate instrument from every Board fee below; the two layers are never merged on this page.
The Board layer is the current schedule at OAC 158:50-9-2, as charged on Board application forms today. For contractors: application $30; initial license $300; the two together are a contractor total at application of $330; renewal $200; renewal late fee $100. The same schedule carries other tiers, recorded here only to keep the schedule whole and expressly not as contractor costs: journeyman application $25, initial journeyman license $50 (a total of $75), journeyman renewal $75, journeyman late fee $25; apprentice application $5, apprentice registration $20 (a total of $25). Board fees are payable to the Board. A one-time low-income fee waiver exists at OAC 158:1-3-13(c). Candidates will encounter older and future fee figures for Oklahoma in other material; the schedule above is the current one as charged, and it is the only schedule this guide prints as current.
Activation stands apart from fees. After passing both parts, the contractor holds an inactive license until the Board receives two instruments: a $5,000 corporate surety bond payable to the Board, in the individual license holder’s name, continuous, with 30-day cancellation notice to the Board; and a certificate of insurance evidencing at least $50,000 of commercial general liability coverage naming the license holder, with the Board as certificate holder. The bond is not a fee, and the insurance certificate is not a fee; both are conditions of active status.
Renewal, reinstatement, and continuing education
A license’s duration is not more than one year, and it expires the last day of the licensee’s birth month each year. The renewal application and fee must be delivered or mailed on or before the birth-month expiration date. An expired license may be reinstated with the renewal fee, the late fee, and proof of all renewal requirements. A license cannot be issued or renewed until all outstanding fines owed to any Board division are paid. Surrendering a license during a Board investigation is treated as revocation for one year. An inactive contractor may become active at any time by proving bond and insurance compliance. And the election trap stated on the program page bears guide-level emphasis: a contractor who elects to renew as a journeyman makes a permanent category change — returning to contractor requires retaking and passing the contractor examination and meeting all contractor requirements again. It is the one renewal checkbox in Oklahoma mechanical licensing that cannot be undone by a fee.
Continuing education is six hours every three years, within the 36 months preceding license expiration, required for renewal of any mechanical contractor or journeyman license. Both the course and the instructor must be approved in advance by the Mechanical License Committee. Licensees are exempt for three years from the date they passed their current licensing examination. Credit mechanics: one credit hour is at least 50 minutes of instruction plus a 10-minute break; continuing education completed while a license is expired applies to the period preceding expiration, and a further six hours is still owed for the subsequent period.
Reciprocity, stated as a mechanism only
Reciprocity requires a written reciprocity agreement between the applicant’s state and Oklahoma, and a substantial-equivalence showing across category regulation and licensure, experience required to sit, continuing education, adopted codes, and the examination itself, including pass score, category-specific examinations, and written form; the other state must recognize Oklahoma licenses. The applicant must be currently licensed, have lawfully practiced one year immediately prior in that state, have no pending disciplinary matters (shown by certified statement), and have obtained the license by examination. Fees are the standard application and initial license fees, nonrefundable. Contractor reciprocity has its own two-step shape: even a qualified contractor applicant is first granted a journeyman license by reciprocity, and the contractor license issues only after passing the Oklahoma Mechanical Business and Law portion and satisfying OAC 158:50-5-3. Partner-state names are not in the rule and are fenced in the sources behind this guide; none are printed here, and a candidate who needs a specific answer should put the specific state to the Board.
How the PassProfessor program approaches these examinations
The program page for this credential is the Oklahoma Mechanical Contractor — HVAC/R program page at /oklahoma-mechanical-contractor-hvacr-exam-prep/. The program prepares both trade forms as distinct sittings across their shared domains at each form’s published weights, keys its code material to the 2024 editions with Oklahoma Revisions on the transition dates stated in this guide, and treats the Business and Law part at its sourced depth, combined residuals included. Material is written from scratch against the Oklahoma sources. PassProfessor is an independent preparation provider, not affiliated with the Oklahoma Construction Industries Board or PSI, and completing the program confers no license, no exemption, and no standing with the Board.
Tell me when enrollment opens. The Oklahoma Mechanical Contractor — HVAC/R program is in the works and enrollment is not yet open. Leave an email address and PassProfessor will write to you when the program is ready — and only about this program.
Frequently asked questions
Which trade form should I sit?
The form that matches the license scope sought. Limited authorizes systems at or below 25 tons cooling and 500,000 Btu/h heating; Unlimited authorizes systems unlimited in horsepower or tons. The sittings differ — 80 questions in 210 minutes against 90 in 240 — and the forms are never blended.
What score passes?
70 percent on each part, printed with its raw count: Unlimited trade 63 of 90, Limited trade 56 of 80, Business and Law 35 of 50.
How many pretest questions are there?
No numeric pretest count is published for these portions. The bulletin states only that experimental, unscored items may be embedded, and this guide states no number.
What are the education substitution steps?
Against the three-year journeyman standard: 1,000 or more program hours plus one year of experience; 500 or more hours plus two years; 375 or more hours plus two and a quarter years; 334 or more hours plus two and a third years; 250 or more hours plus two and a half years. A contractor applicant adds one further year to the journeyman requirement on any route.
When do the 2018 code editions stop working for the examination?
December 14, 2026. From September 14, 2026 the 2024 editions may be used alongside the 2018 editions; after December 14, 2026 the 2018 editions are no longer used or allowed, and the 2024 editions with Oklahoma Revisions are the tested key.
Which Modern Refrigeration editions may I bring?
The 20th, 21st, or 22nd editions — with the 22nd usable as of August 13, 2026 and the 20th no longer allowed starting November 1, 2026. Refrigeration and Air Conditioning Technology, 5th edition (2005), is likewise no longer allowed starting November 1, 2026.
What does it cost, layer by layer?
PSI charges $92 per examination portion. Board fees for contractors are $30 application and $300 initial license — $330 at application — with renewal at $200 and a $100 renewal late fee, under the current OAC 158:50-9-2 schedule.
What happens between passing and practicing?
An inactive license issues. Active status requires the $5,000 corporate surety bond payable to the Board and a certificate of insurance evidencing at least $50,000 of commercial general liability coverage, with the Board as certificate holder.
How long do I have to pass both parts?
Three years from approval. Passing one portion and retaking only the failed portion is available inside that window; outside it, both portions must be retaken.
When does the license expire?
The last day of the licensee’s birth month each year, with renewal delivered or mailed on or before that date. A contractor who renews as a journeyman makes a permanent category change.
Can an out-of-state contractor license transfer in?
Only through the reciprocity mechanism: a written agreement, substantial equivalence, one year of lawful practice immediately prior, licensure by examination — and, for contractors, a journeyman license first, with the contractor license issuing only after the Oklahoma Mechanical Business and Law portion is passed.
Is PassProfessor affiliated with the Construction Industries Board?
No. PassProfessor is an independent preparation provider. The Board alone licenses mechanical contractors in Oklahoma.
When does enrollment open?
The program is in the works and enrollment is not yet open. Leave an email address on this page and PassProfessor will write to you when the program is ready — and only about this program.
