Ohio HVAC Contractor Exam Guide: The Route, the Two Examinations, and the Ohio Code Layers

Ohio licenses its Heating, Ventilating, and Air Conditioning Contractor through the Ohio Construction Industry Licensing Board under Ohio Revised Code Chapter 4740. The license is issued to an individual, covers commercial work only, and requires two examinations: a trade examination of 100 scored questions taken open book in four hours at a 70 percent standard on each part, and a separate Ohio Business & Law examination. This guide works through the credential, the route, and the examination in full. Its companion program page is the Ohio HVAC Contractor program page at /ohio-hvac-contractor-exam-prep/.

This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.

The credential at a glance

ItemVerified position
ProgramOhio HVAC Contractor (commercial): the HVAC trade examination, with the separate Ohio Business & Law examination stated as structure only
RegulatorOhio Construction Industry Licensing Board (OCILB), within the Department of Commerce
Governing lawOhio Revised Code Chapter 4740; rules at Ohio Administrative Code Chapters 4101:16-1, 4101:16-2, and 4101:16-3
Trade examination100 scored questions, 4 hours, open book, administered by PSI; 10 pretest items, not scored, in addition
Passing standard70 percent on each part
Tested referencesOhio Mechanical Code, 2024; International Fuel Gas Code, 2021; Modern Refrigeration and Air Conditioning, 22nd Edition
LicenseeAn individual, assigned to one contracting company at a time
ScopeCommercial work only
Administrator notePassProfessor is independent and is not affiliated with the Ohio Construction Industry Licensing Board

Reading the Ohio system in its layers

Ohio rewards candidates who keep four layers separate. The statute, Ohio Revised Code Chapter 4740, creates the Board, the five license types, the qualification routes, and the renewal frame. The rules at Ohio Administrative Code Chapters 4101:16-1, 4101:16-2, and 4101:16-3 carry the fee schedule, the examination detail, and the continuing education mechanics; most rules took effect May 13, 2022, and Rule 4101:16-2-01 took effect September 6, 2024. The PSI Candidate Information Bulletin for OCILB Contractor Trade Examinations, updated October 26, 2026, carries the sitting itself — counts, times, the reference lists, and the per-registration fee. The adopted code layer — the Ohio Mechanical Code as Ohio applies it in the field — is a fourth layer, related to the tested references but not identical to them. One structural fact governs the whole guide: eligibility for examination is determined by OCILB, not by PSI. PSI conducts the examination program, but the Board decides who may sit.

The credential: an individual, commercial, assigned license

The HVAC Contractor license is one of five license types defined in Chapter 4740: HVAC, refrigeration, electrical, plumbing, and hydronics. The Board’s heating, ventilating, air conditioning, and refrigeration section — five members, as sourced — has primary responsibility for the licensure of HVAC contractors and refrigeration contractors.

Chapter 4740 provides no journeyman, technician, apprentice, or master license class. “Tradesperson” is an employment status: a person employed by a contractor, without responsibility for means, method, or manner of the work. Candidates arriving from states with a journeyman-to-master ladder should set that ladder aside entirely; Ohio’s only credential in this trade is the individual contractor license, and the five-year qualifying experience is tradesperson experience, not time served under a differently named license.

The license is commercial only. A “construction project” under Chapter 4740 is a project involving a building or structure subject to Ohio Revised Code Chapter 3781 and its rules, but not an industrialized unit or a residential building as defined in section 3781.06, and the Board’s application form describes the licenses as issued to the five contractor types who perform commercial work. No person may act as or claim to be a licensed contractor type without holding, or having been assigned, that license.

Assignment is Ohio’s qualifier model. Licenses issue in the name of the individual, who must request assignment to a contracting company with whom they are employed; an unassigned license is placed in inactive status, and a license may be assigned to no more than one contracting company at a time. The assigning individual must be actively engaged in business as that contractor type and readily available for consultation. Work under an assigned license is deemed conducted under that individual’s personal supervision, and violations are deemed committed by that individual — assignment is responsibility, not paperwork. On severance for any reason, immediate notice is required, and the assignment becomes invalid 90 calendar days after the death of the assigning individual, 90 calendar days after the contractor completes a change of company form, or earlier by agreement.

The route, step by step

Step one — qualify. Meet one of the experience routes in the next section, together with the age, citizenship or legal residency, insurance, and character requirements that apply on every route.

Step two — apply. File the written application on the section’s prescribed form, notarized, with the board secretary, with the $25 application fee from the board fee schedule. On approval of qualifications, approval is pending successful criminal background checks. No applicant may be approved for licensure if convicted of a crime of moral turpitude or a disqualifying offense, and the character prerequisites also reach violations of Chapter 4740 or its rules and fraud, misrepresentation, or deception in obtaining a license or in the conduct of business.

Step three — respect the clocks. Approval to take the examination is effective for one year following receipt of a completed criminal records check; a prior check is likewise valid one year. Proof of a passing score on all parts must be submitted no later than twelve months after passing, and the statute issues a license only on a score attained within the twelve months preceding the licensure application. A candidate who passes and then waits has a deadline, not an open file.

Step four — sit both parts. The trade examination and the Ohio Business & Law examination, each at 70 percent. The sources behind this guide state no required order, same-day rule, or sequencing between the two parts, and this guide states none.

Step five — insure, assign, and hold. Maintain contractor’s liability insurance of at least $500,000, request assignment to the employing contracting company, and run the annual renewal and continuing education cycle described below.

The eligibility routes in full

The standard pathway has three elements: at least 18 years of age; United States citizenship, or legal alien status with valid documentation of legal residency produced; and service as a tradesperson in the type of licensed trade for not less than five years immediately prior to the date the application is filed. The insurance prerequisite and the character bars apply in addition.

The registered-engineer pathway sits in the same division: a currently registered engineer in Ohio with three years of business experience in the construction industry in the trade qualifies under it.

The rules catalogue further experience the specialty section may accept. Non-immediate five years qualify where three of the five were on commercial or residential projects in the trade, with education other than an Ohio-approved apprentice program counted in lieu for no more than one year. Five years as an Ohio government inspector in the trade qualify. Five years immediately prior as full-time owner, partner, or employee of a licensed commercial contracting company in the trade qualify. The catalogue also names what does not count, and candidates should read the exclusions before assembling an application: inventory worker, counter salesperson, manufacturer representative, purchasing agent, secretary, clerk, bookkeeper, and unrelated general-contractor experience do not count.

Two pathways took effect September 30, 2025, under House Bill 96. The out-of-state licensee pathway, at section 4740.06(C), covers an applicant holding a substantially similar out-of-state license, with at least five home-jurisdiction authorizations, at least one tax return from licensed services, and foreign-corporation or LLC registration with an Ohio agent, together with the standard application items on age, residency, insurance, and character. The uniformed-services pathway, at section 4740.06(D), covers an applicant actively engaged in a substantially similar capacity for at least three of the five years immediately preceding application, with the same standard items; a section may by rule waive the three-of-five requirement. The secretary must approve a complete application under either pathway within thirty days.

The trade examination in detail

The trade sitting is 100 scored questions in 4 hours, open book, delivered by computer through PSI. In addition, 10 pretest items are administered; they are not scored, and the bulletin’s general pretest section states that one to ten experimental items, generally approximately 10 percent, may be administered unscored but counting against examination time. Scored and pretest counts are never merged into one presented total on this page, and candidates should hold them separate in their own planning: the sitting presents 110 items, of which 100 count.

The passing standard is stated in the rule form: an applicant who attains seventy per cent on each part is deemed to have passed, and licenses issue to individuals who attain at least seventy per cent on both parts and meet section 4740.06. The HVAC trade table prints “70” under its “% Required to Pass” header, and the Business & Law table prints 70 percent required to pass. There is no averaging across parts: a strong trade score does not repair a short business and law score, or the reverse.

The outline, at its published weights, is the preparation map. Warm Air Heating and Air Distribution carries 25 questions. Equipment and Appliances carries 20. Ventilation and Exhaust Systems carries 15. General Knowledge and Requirements, Air Conditioning, Piping Systems, and Testing and Inspection carry 10 each. Read as a study plan, the blueprint says that warm air and equipment together are 45 percent of the sitting, and that air conditioning as a named heading is a tenth of it — candidates whose field work is mostly cooling should notice how much of the Ohio sitting is heating, distribution, and equipment breadth. The scope sentence behind the headings describes one qualified to install, maintain, repair, fabricate, alter, or extend central air conditioning, heating, and ventilating, including ductwork within a complete system and all appurtenances, apparatus, piping, vessels, ducts, and insulation used in connection with that work. A related limit: a Chapter 4740 contractor may install, service, and maintain related or interfaced control wiring for equipment and devices related to their specific license where the control wiring is less than twenty-five volts, and nothing in the license limits any Ohio fire marshal requirement.

Retakes follow a fixed pattern. A candidate who fails an examination portion must wait 60 days before retesting, and may retake the failed part only, on payment of the appropriate fee to the testing agency. PSI states a retest limit of up to 5 times in a year; that figure is PSI’s, stated in PSI’s layer, and this guide attributes it to PSI. Rescheduling without forfeiting the fee requires cancellation notice 2 days before the scheduled date, and voicemail is not acceptable; a no-show, late arrival, late cancellation, or lack of proper identification forfeits the fee.

The Business & Law examination, as structure only

Every applicant for an Ohio contractor commercial license must take the Ohio Contractor’s Business and Law examination in addition to any required trade-specific examination, and the rule frames the whole examination as two parts — one trade-specific, one business and law. This guide states that second part as structure only and builds no content for it. Its mechanics, as published: 50 scored questions in 2 hours, with 5 pretest items that are not scored, open book. Its sole reference is the Contractor’s Guide to Business, Law, and Project Management – Ohio, 4th Edition (NASCLA), and that book is provided in the testing center; no highlighting or notes of any sort may be made in the book during the exam — a condition candidates should know before they arrive expecting to mark a copy of their own.

One structural rule reaches beyond the first license. A person who later seeks licensure in another trade only has to pass the Business and Law examination once every three years: once both parts are passed, the business and law part is deemed a passing score for three years from the date the license is issued for a later Chapter 4740 examination. A contractor adding refrigeration or plumbing inside that window sits the trade part for that license, not both parts again.

The tested references and the code layers

The HVAC reference list contains exactly three items: the Ohio Mechanical Code, 2024 (ICC); the International Fuel Gas Code, 2021 (ICC); and Modern Refrigeration and Air Conditioning, 22nd Edition. It contains no National Electrical Code title, no ACCA manual — no Manual J, D, N, or S — and no NASCLA or other business book. The reference-list rule matters for study method: for code questions, examinations are based only on the edition of the code book listed; except for code books, answers may be based on later editions. A candidate’s code study is therefore edition-locked in a way textbook study is not.

The adopted layer underneath the first reference needs care, because the book title conceals its own history. The 2024 Ohio Mechanical Code is the 2021 International Mechanical Code with Ohio amendments, effective March 1, 2024, under Ohio Administrative Code 4101:2-1-01 to 4101:2-15-01 — except Chapter 11, Refrigeration, which Amendments Group 105 replaced with the 2024 International Mechanical Code Chapter 11, effective October 15, 2025. As amended, the code is the 2021 chapters 2 through 10 and 12 through 15, plus the 2024 Chapter 11. The PSI reference list names only the title “Ohio Mechanical Code, 2024,” so the Chapter 11 replacement is invisible in the exam reference list. Refrigeration material nonetheless keys to the Ohio Mechanical Code as currently amended, not to a 2024 printing alone, and any source from before October 2025 that describes Ohio Mechanical Code Chapter 11 as the 2021 chapter is stale. Candidates should never describe the Ohio Mechanical Code as a 2024 International Mechanical Code book.

The fuel gas layer carries the second distinction. The HVAC list keys the International Fuel Gas Code, 2021, while the Ohio Plumbing Contractor list in the same PSI bulletin keys the International Fuel Gas Code, 2024. Both are current bulletin text, and the split is a distinction to state, never a discrepancy to smooth over: there is no bulletin-wide fuel gas edition. In the field, fuel gas in Ohio commercial work is applied through Ohio Building Code section 101.4.1 — the fuel gas code applies from the point of delivery. There is no Ohio-amended fuel gas code book, and there is no fuel-gas chapter in the Ohio Mechanical Code.

Fees, in their separate layers

The vendor layer is PSI’s. Registration is $69 per registration, whether first attempt or repeat, nonrefundable and nontransferable. The bulletin states no combined price for the two examinations; none is printed in this guide.

The board layer is the schedule at Ohio Administrative Code 4101:16-2-09(A), effective May 13, 2022. Application for examination: $25. Issuance of any license: $25. Annual renewal: $60 per license. Triennial renewal: $180 per license. Late fee: not more than $120 per license not timely renewed. Penalty fee: $30 per license for a check or other draft returned unpaid. All fees under that rule are nonrefundable. The same rule carries provider-layer charges for continuing education course applications and training-agency applications; those are charges on course providers and agencies, not candidate costs, and they appear in this guide only to be identified as such.

Insurance and the bond position

The applicant and licensee shall maintain contractor’s liability insurance of at least $500,000. The statute frames the amount as determined by the specialty section, in only one contracting company name; the rule places the coverage in the individual’s name including completed-operations coverage, or in the business entity’s name if the license is assigned to it, the entity being registered with the Ohio secretary of state. Failure to maintain insurance throughout the license year, unless properly inactive, is a disciplinary offense. On bonds, the verified position is a negative: no surety bond for the contractor license appears in Ohio Revised Code Chapter 4740 or Ohio Administrative Code Chapter 4101:16 as retrieved. The only bond in the chapter is the board secretary’s $5,000 bond, an instrument of the Board’s own administration, not a candidate cost.

Renewal, continuing education, inactive status, and the compliant program

All licenses a contractor holds expire annually on the same date — the original license’s expiration date. Renewal without reexamination requires an application filed not more than 90 days before expiration, payment of the renewal fee, proof of continuing education compliance, and showings on citizenship or residency, insurance, and character; the rule adds certification of at least $500,000 insurance and compliance with the continuing education requirement. Failure to meet the renewal requirements produces automatic suspension without board action. A suspended license may be reactivated on application within one calendar year from expiration, with the renewal fee plus the late fee, insurance certification, and continuing education completed in the section’s time frame; the statute’s late-renewal provision may waive requirements on substantial compliance or excusable neglect, with a late filing fee of not more than double the usual renewal fee.

Continuing education is 10 hours per year. The statute requires board rules to set a total of ten hours per year for any number of valid licenses held — an aggregate figure, so a contractor holding two Ohio trades still owes ten hours in total, not ten per license — with no section curriculum over five hours per year in specific requirements and no contractor over ten in total. The rule requires ten classroom hours each year to be eligible to renew, a classroom hour being at least 50 minutes of instruction. An HVAC holder takes the ten hours in any course approved by any specialty section; there is no trade-specific hour split. There is no carryover of excess hours, and no more than ten classroom hours may be credited in one calendar day.

The compliant contractor program modifies that picture for its members only. Membership requires one year of demonstrated compliance and is open to existing licensees only. Members receive a two-hour continuing education reduction and may renew triennially: 8 hours at annual renewal, 24 hours at triennial renewal. The 8-hour figure applies only inside that program — the standard figure is 10 hours per year.

Inactive status is requested in writing on the section’s form. An inactive license may remain inactive indefinitely, but it must be renewed each year. Inactive licensees do not engage in specialty contracting, are exempt from continuing education, and need not maintain liability insurance. Reactivation requires cumulative continuing education for the inactive period, capped at 10 hours per inactive year and 30 hours in total, a $60 reactivation fee, and certification of $500,000 insurance.

Reciprocity, stated as a mechanism only

Where a written reciprocity agreement exists, an individual licensed in another state who applies, submits a copy of the agreement, and pays the statutory fee shall be authorized a license without examination if the section determines the other state’s requirements are substantially equal and that state extends similar reciprocity to Ohio licensees; the rule adds a completed criminal records check contingency. No HVAC reciprocity state list is verified in the sources behind this guide, and none is printed here; a candidate who needs a specific answer should put the specific state to OCILB.

This guide covers the Ohio state trade examination. Federal technician certification for refrigerant handling is a separate credential and a separate PassProfessor program; no provision of Chapter 4740, the cited rules, the PSI bulletin, or the OCILB application form as retrieved conditions this license on it, and candidates should not let any source tell them otherwise as an Ohio licensure claim.

How the PassProfessor program approaches this examination

The program page for this credential is the Ohio HVAC Contractor program page at /ohio-hvac-contractor-exam-prep/. The program itself is built on the blueprint at its published weights, on the three-book reference list as its boundary, and on the Ohio layers kept separate. Material is written from scratch against the Ohio sources. PassProfessor is an independent preparation provider, not affiliated with the Ohio Construction Industry Licensing Board or PSI, and completing the program confers no license, no exemption, and no standing with the Board.

Tell me when enrollment opens. The Ohio HVAC Contractor program is in the works and enrollment is not yet open. Leave an email address and PassProfessor will write to you when the program is ready — and only about this program.

Frequently asked questions

Who determines eligibility for the Ohio HVAC Contractor examination?

OCILB. PSI conducts the examination program, but only the Board determines eligibility.

What score passes?

Seventy percent on each part. The rule form is that an applicant who attains seventy per cent on each part is deemed to have passed; there is no averaging between parts.

How are the 100 trade questions weighted?

Warm Air Heating and Air Distribution 25; Equipment and Appliances 20; Ventilation and Exhaust Systems 15; General Knowledge and Requirements, Air Conditioning, Piping Systems, and Testing and Inspection 10 each. Ten further pretest items are administered unscored.

Why does the HVAC list key the 2021 fuel gas code when plumbing keys 2024?

Because the PSI bulletin prints the two lists that way, and both are current. The HVAC examination keys the International Fuel Gas Code, 2021. There is no single bulletin-wide fuel gas edition.

What changed in the Ohio Mechanical Code on October 15, 2025?

Chapter 11, Refrigeration, was replaced with the 2024 International Mechanical Code Chapter 11 under Amendments Group 105. The rest of the 2024 Ohio Mechanical Code remains the 2021 International Mechanical Code with Ohio amendments, effective March 1, 2024. The PSI reference list shows none of this; it names only the book title.

What experience routes exist besides the five-year tradesperson route?

A registered-engineer route, specialty-section-accepted experience including inspector and licensed-company routes, and — effective September 30, 2025 — out-of-state licensee and uniformed-services pathways under section 4740.06(C) and (D).

How long is a passing score good for?

Proof of a passing score on all parts must be submitted no later than twelve months after passing, and a license issues only on a score attained within the twelve months preceding the licensure application.

What does it cost to sit?

PSI charges $69 per registration. Board fees are separate: $25 application for examination and $25 issuance of a license under the schedule effective May 13, 2022, with annual renewal at $60 per license.

Is a surety bond required for the Ohio HVAC Contractor license?

No contractor surety bond appears in the statute or rules as retrieved. The license’s financial prerequisite is contractor’s liability insurance of at least $500,000.

How much continuing education does an Ohio HVAC Contractor owe?

10 hours per year in total, across all licenses held, taken in any course approved by any specialty section. The 8-hour figure belongs only to compliant-contractor-program members.

Can an Ohio HVAC Contractor license sit inactive?

Yes, on written request, renewed each year, with no specialty contracting, no continuing education, and no insurance duty while inactive. Reactivation requires cumulative continuing education capped at 30 hours, a $60 reactivation fee, and insurance certification.

Is PassProfessor affiliated with OCILB or PSI?

No. PassProfessor is an independent preparation provider. OCILB alone licenses HVAC contractors in Ohio, and PSI administers the examinations under contract.

When does enrollment open?

The program is in the works and enrollment is not yet open. Leave an email address on this page and PassProfessor will write to you when the program is ready — and only about this program.