The JR journeyman refrigeration certificate is New Mexico’s individual refrigeration credential: issued by the Construction Industries Division under 14.6.6.11D NMAC, held by a journeyman who works under an MM-3, MM-4 or MM-98 license or a JSM-licensed entity, and gated by two years of experience inside ten years, an express EPA recovery prerequisite, and an examination whose passing score the rule states as 75% or higher. This guide follows the ladder from apprentice supervision to renewal, and states the JR examination’s published rules — and its unpublished ones — exactly as the sources leave them.
This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.
The credential at a glance
| Item | Verified position |
|---|---|
| Program | New Mexico JR Journeyman Refrigeration — the JR journeyman certificate examination layer |
| Regulator | Construction Industries Division (CID), Regulation and Licensing Department, under the CILA and NMAC Title 14, Chapter 6 |
| Certificate | JR — journeyman refrigeration, an individual journeyman certificate under 14.6.6.11D NMAC |
| Passing standard | “75% or higher” — 14.6.4.8C(2) NMAC |
| Experience gate | Two years (4,000 hours) of experience, all within the last 10 years; approved training credited at half rate, capped at half the requirement |
| Prerequisite | Compliance with EPA recovery requirements must be demonstrated before the certificate is issued — 14.6.6.11D NMAC |
| Supervision | Works under an MM-3, MM-4 or MM-98 license, or under a JSM-licensed entity — 14.6.4.8F(5) NMAC |
| Examination fee | $25 — the CID rule fee for a mechanical journeyman examination, 14.5.5.9B NMAC |
| Term and renewal | Three-year term; renewal $25 per year per classification held; 16 hours of continuing education, at least 8 on the current CID code |
| Retakes | The same examination not more than twice within a 30-day period |
| Administrator note | PassProfessor is independent and is not affiliated with the Construction Industries Division |
How to read this guide: the certificate tier and the contractor tier
Almost every error available in New Mexico mechanical licensing is a tier error — a contractor fact wearing a journeyman certificate’s clothes, or the reverse. The two tiers are built differently at every point. The contractor tier is held by a business through a qualifying party: the license carries the classification, the qualifying party passes the contractor examinations, and the business contracts with the public. The certificate tier — where the JR sits — certifies individuals: the journeyman’s own experience, examination and prerequisites, and a defined place under the contractor tier’s licenses. Fees, continuing education and examination mechanics all differ between the tiers, and the rules state them in different provisions — contractor material principally at 14.6.3 NMAC, journeyman certification at 14.6.4.8. This guide keys every figure to the journeyman layer and names the contractor layer only where the ladder itself requires it. The companion New Mexico JR Journeyman Refrigeration program page summarises the certificate; this guide is the deep version.
The ladder in full
The apprentice rung. An apprentice may perform mechanical and plumbing work only under the direct supervision of a validly certified journeyman, employed by a validly licensed person or the holder of a valid annual permit — 14.6.4.8A(1) NMAC. Note what the current rules do and do not say here: no apprentice registration scheme and no numeric supervision ratio appears in the journeyman or classification rules as currently compiled, and this guide states none. The supervision is defined by its quality — direct, by a certified journeyman, inside a licensed employment frame — not by a headcount.
The journeyman rung. The JR holder is the certified journeyman for refrigeration work, and the ladder turns on this rung in both directions: apprentices work under the journeyman’s direct supervision, and the journeyman works under a contractor license. The JR’s own supervision line is stated at 14.6.4.8F(5): a JR works under an MM-3, MM-4 or MM-98 license, or under a JSM-licensed entity. The certificate authorises the person to do the work inside that frame; it does not authorise the holder to contract with the public, because contracting is the contractor tier’s act, performed through the license and its qualifying party.
The contractor rung, as boundary only. The MM classifications — MM-3 covering heating, ventilation and air conditioning work among them — are contractor licenses with their own gates, examinations and fees, held through qualifying parties. This program’s contractor sibling, the MM-3 preparation, treats that tier on its own terms. Here the contractor rung matters only as the JR’s ceiling: the licenses under which JR work is performed, and the reason a JR holder’s next step is a different credential kind, not a bigger certificate.
The neighbouring certificates, by name only. The journeyman certificate family at 14.6.6.11D includes the JG journeyman natural gas fitter, who works under an MM-2 or MM-98 license, and the JSM journeyman sheet metal, who works under an MM-3 or MM-98 license — and under whose licensed entity a JR may also work, as the supervision rule above records. Both are separate certificates with their own preparation programs; nothing about their gates or examinations is stated in this guide, and none of the JR’s program-specific propositions — above all its EPA recovery prerequisite, which the rule states for the JR — is transferred to them.
Classification discipline. Licenses and certificates are issued in classifications carrying letter-number symbols; the field letter M covers the mechanical and plumbing classifications. Work outside the scope of one’s classification violates the Construction Industries Licensing Act — 14.6.6.8A NMAC. For the JR, scope discipline and supervision discipline are the same habit viewed from two sides: the certificate names the trade, the rule names the licenses above it, and lawful work stays inside both.
The route, step by step
Step one — build the experience record inside the window. Two years, 4,000 hours, all within the last 10 years, with any training credit documented under the half-rate rule below. Step two — satisfy the EPA recovery prerequisite so compliance can be demonstrated before the certificate issues. Step three — apply, through CID or its designee, knowing the six-month clock starts on receipt: all certification requirements must be met within six months or the application expires and all fees paid are forfeited. Step four — sit the examination administered by CID or its designee and reach the rule’s standard: 75% or higher. Step five — receive the certificate once every requirement, including the recovery prerequisite, is demonstrated. Step six — work and renew on the ladder: under the specified licenses, on a three-year term, with the code-weighted continuing education completed before renewal. Two relief provisions sit at the edges of the route: military members and veterans follow an expedited path under the rule layer, with the certificate issued as soon as practicable and no later than 30 days after a completed application, and no license or certificate fee charged for their first three years.
The gate in depth: two years, a ten-year window, and the half-credit rule
The experience requirement reads simply — two years (4,000 hours) — and repays exact reading, because two separate limits are folded into it. The first is the recency limit: all experience must fall within the last 10 years. A refrigeration mechanic returning after a long absence may hold deep experience and still hold little countable experience; the window, not the career, is measured. The second is the training-credit limit. Journeyman applicants may use credited training toward the experience requirement where approved, under the rule at 14.6.4.8C(1): accredited technical training counts in lieu of work experience at one-half year of experience per year of training, and credited training may never exceed one-half of the total experience requirement.
Work the arithmetic once, slowly, because candidates misjudge it in both directions. One full year of accredited training earns one-half year of experience credit. Two years of training would nominally earn a full year of credit — and that is exactly the cap, one-half of the two-year requirement, so no amount of additional schooling adds more. The remaining half of the gate — at least one full year, 2,000 hours, of worked experience inside the window — is always worked. Training shortens the road by at most half; it never paves it. Candidates planning around a program of study should also keep the layers separate in their records: the training provider’s accreditation and CID’s approval of the credit are what make the hours countable, and the six-month application clock at step three is the wrong moment to discover a documentation gap.
The EPA recovery prerequisite, at its sourced level
New Mexico writes into the JR certificate provision what federal law otherwise imposes on the work itself: the JR applicant must demonstrate compliance with EPA recovery requirements prior to a certificate being issued — 14.6.6.11D NMAC. The fact base behind this guide is explicit that this is an express certificate prerequisite in the rule, and equally explicit about its level: the sources name EPA recovery requirements; they do not specify a particular federal certification type or card for the JR in the text pulled, and this guide accordingly claims none. Candidates should not import a named card type from another state’s program, from a contractor-tier summary, or from a vendor page, and should instead be ready to demonstrate recovery compliance as the rule phrases it. The practical substance is not in doubt either way: refrigerant recovery performed to the federal requirements is part of the refrigeration craft this certificate certifies, and the program treats recovery technique — when recovery is required, how systems are evacuated and how refrigerant is handled and documented — as core preparation content, because the prerequisite and the trade point at the same skills.
The examination: the published rules
Examinations for journeyman certification are administered by CID or its designee, under 14.6.4.8C(2) NMAC — the provision that carries this tier’s examination law, and a short provision with dense content. It states the pass standard verbatim: “a passing score is 75% or higher.” It states the retake cap in the same breath: an applicant who fails may retake, but not more than twice in any 30-day period. And the cheating rule, at 14.6.4.8C(2)(e), states the consequences of a CID determination of cheating in full: the examination is voided, all fees are forfeited, any license or certificate issued on that examination is automatically voided, and the applicant is barred from any CID examination for one year. The bar runs to every CID examination, not merely to a retake of this one — a breadth candidates should register before, not after, a sitting.
Two disciplines govern how this guide presents those rules. First, the 75% figure is New Mexico’s own: the lane’s standing instruction is that New Mexico’s standard is 75%, not the 70% figure common elsewhere, and no other state’s pass form is used in this package. Second, the contractor tier’s examination-administration detail — the cancellation, arrival and score-reporting mechanics printed in the contractor examination bulletin — is recorded in the sources as contractor-layer material. It is not restated here as JR administration law, because the sources do not state it for the JR examination; candidates follow the instructions issued with their own examination scheduling.
The examination: the fenced core, stated plainly
Against those published rules stands a set of mechanics that no primary source in the lane publishes for the JR examination: question count, duration in minutes, reference list, book policy, content outline and pretest count are unverified for the JR examination and are stated nowhere in this guide. This is a deliberate fence, maintained in the fact base itself after its most recent verification pass, and the honest presentation is to name it rather than paper over it. Three consequences follow for candidates. Do not pace preparation by a borrowed count: the contractor examinations above this tier publish their own counts and durations, and those figures describe different examinations for a different credential — a qualifying party’s trade paper is not the journeyman’s sitting, and no figure from it appears in this package. Do not buy a JR reference list: none is published in the sources, so any list presented as the JR’s official list is invented. Prepare by depth instead of by outline: with no published content weights, preparation is organised around the refrigeration craft itself and the New Mexico rule layer — which is how the study plan below is built. When CID or its designee issues the candidate’s own examination instructions, those instructions govern the sitting; this guide’s silence is about what may be claimed in advance, and it is maintained precisely so that nothing here contradicts them.
Fees in full: the rule layer and nothing else
The journeyman fee schedule sits at 14.5.5.9B NMAC, and it is brief. The mechanical journeyman examination fee is $25. The journeyman renewal fee is $25 per year per classification held. Both figures are stated here exactly as the rule states them, and two common corruptions are avoided on purpose. The renewal fee is not multiplied into a lump sum for the three-year term: the rule prices renewal per year per classification, the sources publish no single term figure, and an invented total would misstate the instrument. And no contractor-tier figure is admitted into this schedule: the contractor examinations carry their own vendor-charged fees, contractor licenses carry their own application and per-classification fees, and a contractor surety bond exists at that tier — none of those instruments is a JR fee or a JR obligation in the sources, and none is printed in this guide as one. One authority is recorded for completeness: CID may raise examination fees by a commission-approved multiplier of up to three under 14.5.5.9D, so the $25 examination figure is the rule amount as published, subject to that standing authority. A secondary composite figure sometimes circulated for contractor applications is likewise not a rule fee and has no JR application in any case.
The field code, and why the tested layer stays unstated
New Mexico’s mechanical field code is a Uniform Mechanical Code adoption: the current 14.9.2 NMAC is the 2021 New Mexico Mechanical Code, adopting the 2021 UMC as amended by CID, effective March 10, 2022, and the earlier either-code transition window closed in September 2022. So the field position is settled: the JR holder works under the 2021 UMC as New Mexico amends and enforces it. Candidates should also know the two traps at this layer. A citation of the field rule to an earlier edition still circulates in contractor-tier material and is stale — the current rule is the 2021 code. And a draft rule proposing a 2024 New Mexico Mechanical Code exists at the Department but has not been adopted; it is neither field code nor examination code, and this guide keys nothing to it.
The tested layer for the JR is then stated with the same precision: because the JR reference list is unpublished in the sources, no tested edition is claimed for the JR examination itself. The field code’s 2021 UMC is the code the work is performed under, and preparation is grounded in it as field law; what this guide will not do is silently transfer the contractor examinations’ keying — where field code and examination key are recorded as agreeing — down to the JR sitting. International Mechanical Code material, finally, is not New Mexico material at either layer of this program: New Mexico is a Uniform Mechanical Code state for the mechanical examinations in its sourced record, and IMC-keyed content does not transfer.
Holding the certificate: term, continuing education, renewal
The certificate term is three years, expiring the last day of the issue month, under CID’s journeyman renewal instructions administered by its designee. Renewal then turns on education in a way the contractor tier’s does not. The rule at 14.6.4.8G(2) is categorical: no journeyman certificate may be renewed without proof of continuing-education compliance. The requirement itself, at 14.6.4.8H(1): before renewal or reinstatement, the holder must complete a minimum of 16 hours of approved coursework, of which a minimum of 8 hours must cover the current CID code enforced for the classification being renewed. Read the split as design, not decoration: at least half of every renewal cycle’s education is code education, keyed to the code currently enforced for the JR’s own classification — which, at the field layer, is the 2021 New Mexico Mechanical Code. The other half is approved coursework at the holder’s direction within the approval rules. The boundary against the contractor tier is verified in the sources and worth stating once: contractor licenses and qualifying-party certificates carry no continuing-education requirement in their current rule text. The 16 hours are a journeyman-certificate duty; they do not float upward, and the contractor tier’s exemption does not float down.
A study plan built for a fenced outline
With no published content outline, the plan is built from the credential’s structure instead. First, the craft core: the refrigeration cycle until it can be traced through any described system without notes; components and their failure modes; piping, charging, evacuation and — at the level the certificate’s prerequisite demands — recovery practice performed to the federal requirements. Second, the field code as working law: the 2021 Uniform Mechanical Code in its New Mexico form, navigated by structure, with the code’s mechanical provisions read as the rules of the jobs the JR holder actually performs under the MM licenses. Third, the New Mexico rule layer as its own subject: the classification and supervision provisions, the two-year gate and half-credit arithmetic, the six-month application clock, the 75% standard, the twice-in-30-days retake cap, the cheating consequences, the $25 rule fees, and the 16-hour code-weighted renewal requirement — the facts most likely to be misstated by generic material are concentrated here. Fourth, mixed timed practice across craft and rule layer together, paced by the candidate’s own timing discipline rather than by any borrowed sitting length. Fifth, the ladder review: before the sitting, re-read the supervision structure whole — apprentice under journeyman, JR under its named licenses, contracting through the qualifying party — because situational items in this trade habitually test who may lawfully do, direct and contract for the work described.
The errors this certificate is built to catch
Importing the contractor tier. Borrowed counts, durations, fees or a borrowed absence of continuing education all fail the same way: they describe a different credential. Softening the standard. Seventy-five percent or higher is the rule’s sentence; a 70% habit carried from another state misjudges the sitting. Misreading the training credit — counting training hour-for-hour, or past the half cap — overstates eligibility and can strand an application inside its six-month clock. Letting the window close: experience outside the last 10 years does not count, however senior the mechanic. Naming the prerequisite the sources do not name: the rule requires demonstrated compliance with EPA recovery requirements, and inventing a specific card type adds a requirement the rule text pulled does not state. Assuming a ratio: the apprentice rule is direct supervision by a certified journeyman inside a licensed frame, and any numeric ratio quoted for New Mexico mechanical work is unverified in the current rules. Each error is a layer or ladder error, and the certificate’s whole design — individual, supervised, classification-bound — exists to catch them.
After the sitting: the certificate and its clock
A pass completes the examination step; the certificate issues when every requirement — experience inside the window, the examination at 75% or higher, and demonstrated EPA recovery compliance — stands met inside the application’s six-month life. The certificate then runs its three years to the last day of its issue month, and the working duties run beneath the cycle: work inside the refrigeration classification, under the named licenses, supervising apprentices directly when they are placed under the holder, and accumulating the 16 code-weighted hours that renewal will audit. The JR rewards the mechanic who treats the ladder as the job description it is: certified personally, supervised structurally, and current by rule.
Frequently asked questions
Where is the JR’s passing score stated?
In the journeyman certification rule itself: 14.6.4.8C(2) NMAC provides that a passing score is 75% or higher. It is a rule-stated standard, and it is New Mexico’s own — not the 70% figure used for many other states’ journeyman examinations.
How does the training credit actually work?
Accredited technical training, where approved, counts in lieu of work experience at one-half year of experience per year of training, and the credit can never exceed one-half of the two-year requirement. Two years of training therefore earns the maximum credit — one year — and at least one year (2,000 hours) of worked experience inside the ten-year window is always required.
Why does this guide not state the JR examination’s question count or time limit?
Because no primary source publishes them for the JR examination. The fact base records the count, duration, reference list, book policy, content outline and pretest count as unverified and fenced for this examination specifically. Figures published for the contractor examinations describe that tier’s different examinations and are not used here.
Is there a NASCLA route around the JR examination?
No source states one for the journeyman examination. A waiver connected to the NASCLA accredited examination exists at the contractor qualifying-party layer, for that tier’s trade examination only; nothing transfers it to the JR.
What does cheating cost under the JR rules?
Everything attached to the sitting: the examination is voided, all fees are forfeited, any certificate issued on the examination is automatically voided, and the applicant is barred from any CID examination for one year — 14.6.4.8C(2)(e) NMAC.
Must a JR holder complete continuing education if the contractor above them need not?
Yes. The 16-hour requirement — at least 8 hours on the current CID code enforced for the classification — binds journeyman certificates, and no certificate may be renewed without proof of compliance. The contractor tier’s lack of a continuing-education requirement in its rules does not extend to this tier.
How is the renewal fee structured?
$25 per year per classification held, as the rule at 14.5.5.9B NMAC states it. The sources publish no single lump-sum figure for the three-year term, and this guide does not manufacture one by multiplication.
Which code should field preparation be grounded in?
The 2021 Uniform Mechanical Code as adopted and amended by the 2021 New Mexico Mechanical Code at 14.9.2 NMAC — New Mexico’s field mechanical code. No tested edition is claimed for the JR examination itself, because its reference list is unpublished in the sources.
Can a JR holder take a refrigeration contract directly from a customer?
No. The JR is an individual journeyman certificate; contracting runs through the MM contractor licenses, held by businesses through qualifying parties. The JR holder works under an MM-3, MM-4 or MM-98 license, or under a JSM-licensed entity.
Is PassProfessor affiliated with CID?
No. PassProfessor is an independent preparation provider, not affiliated with the Construction Industries Division or the Regulation and Licensing Department. CID alone certifies journeymen.
When does enrollment open for the PassProfessor program?
The program is in the works and enrollment is not yet open. Leave an email address on this page and PassProfessor will write to you when the program is ready — and only about this program.
