Kentucky Journeyman HVAC Mechanic Exam Guide: The Credential, the Department’s Examination, and the Route Between Them

Kentucky’s journeyman heating, ventilation, and air conditioning mechanic license is issued by the Department of Housing, Buildings and Construction, through its Division of Heating, Ventilation, and Air Conditioning, under KRS 198B.650 to 198B.689. The examination is the Department’s own in-person, open-book examination, passed at at least seventy (70) percent, on two printed references only. The PassProfessor Kentucky Journeyman HVAC Mechanic program prepares candidates for that examination and the supervised practice that follows it.

This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.

The credential at a glance

ItemVerified position
ProgramKentucky Journeyman HVAC Mechanic: the journeyman examination for the journeyman heating, ventilation, and air conditioning mechanic license
RegulatorDepartment of Housing, Buildings and Construction (DHBC), Division of Heating, Ventilation, and Air Conditioning; KRS 198B.650 to 198B.689; 815 KAR 8:010
Examination administratorThe Department itself — developed, administered, and scored by the Department or its designee; no outside testing vendor
RegistrationForm HVAC-4, filed with the Department’s main office in Frankfort, with a passport-sized color photograph taken within the past six months
Passing standardAt least seventy (70) percent
Book policyOpen book
Question count, duration, and outlineNot published in any current primary source, and stated as unpublished throughout this guide
Tested referencesNational Fuel Gas Code (NFPA 54), 2009 edition; International Residential Code, 2015 edition
Examination fee$50, payable to the Kentucky State Treasurer
Score validityA passing score is valid for three years
Administrator notePassProfessor is independent and is not affiliated with the Department of Housing, Buildings and Construction

Kentucky is the examination in this catalog that refuses to behave like a vendor product, and this guide is organized around that refusal. There is no bulletin to summarize, no blueprint to reproduce, and no timed computer session to rehearse minute by minute. There is a department that writes, gives, and scores its own examination; a regulation that says exactly what the examination covers and exactly what passes it; a two-book reference list; and a licensing system of three tiers in which the journeyman’s place — on site, over apprentices, under a master — is defined with unusual precision. The candidate who learns to read that system at the level Kentucky wrote it holds most of what this sitting rewards. The program page, Kentucky Journeyman HVAC Mechanic Exam Preparation, states the credential in brief; this guide works through it in full.

Reading the verified facts

Facts in this guide sit in distinct layers. The statute, KRS 198B.650 to 198B.689, supplies the definitions, the tiers, the eligibility gates, and the reciprocity and discipline frames. The licensing regulation, 815 KAR 8:010, supplies the examination mechanics that exist — the pass standard, the registration route, the experience definition, the fees, and the renewal clocks — while continuing education lives in 815 KAR 2:010. The Department’s in-person examination sheet supplies the delivery facts: regional sittings, open book, mailed results, and the printed reference lists. Where none of those layers publishes a fact, this guide says so and moves on: no question count, no time limit, no pretest count, and no content-outline weights appear in any current primary source, and any preparation built on invented versions of them is built on air.

The three tiers, and where the journeyman stands

Kentucky licenses exactly three positions in this trade. The master heating, ventilation, and air conditioning contractor holds the contracting position: entitled to practice HVAC contracting, including obtaining any necessary permits, and primarily responsible for the HVAC work performed — supervising and primarily responsible for all work performed by the employees and subcontractors of the licensee or of the company represented. No firm may engage in HVAC contracting in any county unless the person in responsible charge is a master contractor and an employee or subcontractor of that firm.

The journeyman mechanic is licensed to perform HVAC work under the supervision, direction, and responsibility of a master contractor. The regulation states the working duties directly: the journeyman shall be physically on site; shall personally observe and be responsible for each apprentice assigned to the journeyman in carrying out the installation, alteration, and repair of HVAC systems; and shall otherwise operate under the general direction and supervision of the master contractor. The tier carries real responsibility downward — over apprentices, over the work in front of them — and no contracting authority upward: a journeyman does not hold the permit position, does not stand in responsible charge, and may not use any title likely to create the impression of being a master contractor without holding that license.

The apprentice mechanic holds a certificate, not a license, issued by registration with the Department — not by examination, and without a fee to obtain or renew it. Experience gained under a Kentucky licensed master while registered as an apprentice through the state and federal apprenticeship systems shall be accepted toward the two-year journeyman requirement. That credit does not make registration a prerequisite: the eligibility routes are written in employment terms. The work itself is defined once for all three tiers — installation, maintenance, altering, remodeling, or repair of heating systems, ventilation systems, hydronic systems, burner service, or cooling systems — with duct cleaning outside the definition except that a cut access point must be repaired and resealed before the cleaning concludes, a major repair meaning complete replacement of the named system types, and routine maintenance excluding major repairs. The practice-level insurance rule binds the contracting practice; the journeyman’s own application package lists no insurance proof, so this guide records insurance as the practice rule under which a journeyman works, not as a journeyman application requirement.

The route, step by step

Step one — establish eligibility. Confirm the age and work-authorization conditions and assemble two years of qualifying experience under one of the two routes, measured by the regulation’s definition of a year, with proof documents gathered before anything is filed. Step two — register for the examination. File Form HVAC-4 with the Department’s main office in Frankfort, with the $50 examination fee payable to the Kentucky State Treasurer and a passport-sized color photograph taken within the past six months; expect notice of the time and place at least one week before the sitting. Step three — sit the Department’s examination. Attend the regional in-person, open-book sitting, and meet the published standard of at least seventy (70) percent. Results arrive by mail. Step four — apply for the license. File Form HVAC 2 with proof of experience, proof of satisfactory completion of the examination, the photograph, and the $50 initial license fee; the application stays pending up to one year and is then voided if incomplete. Step five — hold and renew. Renew annually by the last day of your birth month, with six hours of continuing education earned in the twelve months before renewal. A failed applicant may request to retake the examination without resubmitting the registration requirements, apart from the examination fee — but an examination application left incomplete for one year from the first notice of examination is void, and a passing score holds its value for three years and no longer.

The examination in depth

The examination’s legal home is a short passage of the licensing regulation, and every verified mechanic comes from it or from the Department’s sheet. The examinations shall be developed, administered, and scored by the Department or its designee. Examinations are given at least twice during each calendar year, at times and places prescribed by the Department. An applicant shall not take an examination until the examination fee is paid. Notice of passing or failing is provided as soon as practicable — and, in the Department’s delivery practice, results are mailed through the US Postal Service.

Delivery is regional and in person, in locations set by the Department as close to the applicant as possible, scheduled based on the volume of applications received — which is why the registration form on file is what earns the candidate a notice, at least one week before the date. Reasonable accommodations are made, on request, where necessary to provide accessibility to disabled applicants. The book policy is stated in the sheet’s own question-and-answer form: there are no study guides, and both examinations are open book examinations. The preparation consequence follows: the skill examined is not recall of the two printed references but speed and accuracy in finding, reading, and applying them.

Two provisions widen the examination’s edges. The Department shall recognize another examination as equivalent if the submitter demonstrates it covers the same material and requires the same level of knowledge — the stated exception inside the pass rule, not a different pass mark. And a candidate may sit at a Department-approved testing facility, applying directly to that facility; no approved-facility list is published, and this guide invents none. What is not published deserves emphasis: no question count, time limit, unscored count, or outline percentages appear in the statute, the regulation, the registration form, or the sheet, and older or commercial material printing confident versions of them does not describe the current examination.

The pass standard, in the regulation’s words

The passing standard is a single sentence in 815 KAR 8:010: except as provided in the equivalence subsection, an applicant shall pass with a score of at least seventy (70) percent on the examination. This guide prints it in that form — at least seventy (70) percent — because that is the form Kentucky published, and the same sentence governs both HVAC examinations. It is the journeyman’s own standard, not a figure borrowed from the master program: the journeyman examination is prescribed under the content subsection the pass sentence follows, and the sentence applies to the examination the applicant actually sits.

Seventy percent on an open-book sitting carries a practical meaning: failures rarely come from never having seen the material; they come from not finding it in the room — the wrong book, the right book at the wrong edition, time spent hunting instead of answering. That is why this program treats reference fluency as the central examination skill, ahead of memorization.

Content: codes, standards, and practices — and nothing else

The journeyman content rule tests knowledge of codes, standards, and current technological and industry recommended practices with respect to the proper installation, maintenance, repair, remodeling, or alteration of all types of HVAC systems. Every word of that scope is trade content, mirroring the statutory definition of the practice itself. The contrast with the tier above is exact: the master examination’s content rule covers the same ground and then adds law and regulation relating to HVAC business. The journeyman rule adds nothing — no business component, no law component, and no separate business-and-law examination anywhere in the Kentucky HVAC system as published. A passed master examination can satisfy this requirement outright: a journeyman applicant may apply the passage of a master contractor’s examination for the journeyman examination requirement, and the same score may also satisfy the master requirement while it remains valid — the three-year validity of a passing score is what gives that cross-credit its reach.

The two books, and the asymmetry Kentucky intends

The Department’s sheet prints the journeyman requirements as a list, and the reference portion is two items long: the National Fuel Gas Code (NFPA 54), 2009 edition, and the International Residential Code, 2015 edition — alongside the completed registration form, the fee, and a two-by-two passport-style photograph. Nothing else is listed: no mechanical code, and no textbook. The master list, printed on the same sheet, is the mirror image: NFPA 54, 2009 edition, and the International Mechanical Code, 2015 edition — no residential code, and no textbook either. The asymmetry is deliberate in effect: the journeyman is examined out of the residential code, the master out of the mechanical code, and both out of the same fuel gas code in the same edition. The error this structure punishes is the merged shelf — splitting attention across a code the sitting never opens while arriving under-prepared in the code it always opens. Study should follow the work: in the residential code, the provisions governing appliance installation, combustion air, venting, duct systems, and residential fuel gas; in NFPA 54, the full arc of a gas installation — piping materials and sizing, installation, inspection and testing, and appliance connection — with navigational mastery as the goal in both volumes.

Tested editions against field editions

Field work is made in conformity with the Uniform State Building Code. The Department’s adopted-codes list prints the 2018 Kentucky Building Code (2015 International Building Code base), the 2018 Kentucky Residential Code (2015 International Residential Code base), the 2015 International Mechanical Code, the 2015 International Fire Code, the 2015 International Existing Building Code, and NFPA 54, 2012 edition, among its NFPA entries. The residential layers therefore align: the examination’s 2015 residential code is the base the 2018 Kentucky Residential Code amends, so the candidate studies the base text in the room and applies the Kentucky-amended version on the job. The fuel-gas layers do not align: the examination key is NFPA 54, 2009 edition; the field list prints the 2012 edition. Where a provision changed between those editions, the examination answer and the field answer are different answers, each wrong in the other’s setting. This program flags those divergences rather than silently choosing a layer. No source announces any coming edition change for the field codes or the examinations.

Eligibility in depth: two routes, one definition of a year

The journeyman applicant shall be at least eighteen years of age, and shall be a citizen of the United States or a resident alien authorized to do work in the United States. The applicant shall have passed the Department’s examination and paid the regulatory fee. The experience gate is disjunctive: two years under a master, or two years in the work, with the whole gate measured by a definition that rewards sustained employment over accumulated fragments. Route one is regularly and principally employed in the HVAC trades for not less than two years under the direction and supervision of a master contractor. Route two — the portability route — is regularly and principally employed in the performance of HVAC work for not less than two years in Kentucky or in another jurisdiction, as demonstrated by verifiable documentation. It is currently a two-year route; higher figures printed for it in commercial material state superseded law.

The regulation’s definition of a year governs both routes: one year of HVAC experience consists minimally of 1,500 hours of HVAC work in a continuous twelve-month period, so two qualifying years are at least 3,000 hours arranged as continuous blocks. Experience is listed on the application form, and the proof instruments are enumerated: a W-2 form; an affidavit by a master contractor who directed and supervised the applicant; a copy of a current out-of-state license or equivalent where that state requires licensure; verifiable documentation of out-of-state contracting work where it does not; or DD Form 214. The Department may request additional proof, before or after licensing, where it has reason to believe the experience shown is insufficient or nonexistent. Three credits complete the gate, each capped at one year: one academic year of a Department-approved curriculum or one year of professional training; one academic year of teaching in an approved HVAC technical education program; and Department-determined equivalent experience on statutorily exempt work. Military training and experience equivalent to the journeyman requirements, acquired in the Armed Forces, Reserves, or National Guard and actively engaged in that occupation for not less than two years as annotated on DD Form 214, shall be accepted, with the remaining requirements still to be met. Registration as an apprentice is not a gate at all: registered-apprentice experience under a licensed master shall be accepted toward the requirement — accepted, not required.

Fees, renewal, and the life of the license

The journeyman’s dollars each belong to a named instrument: examination fee $50, non-refundable, with Form HVAC-4, payable to the Kentucky State Treasurer; initial license fee $50 for a twelve-month license, on Form HVAC 2 — initial fees may be prorated for not less than seven or more than eighteen months, the initial license expires on the final day of the applicant’s birth month, and a shorter term is reduced pro rata, stated here without the master tier’s worked example, whose dollars are not the journeyman’s; renewal fee $50, on Form DHBC L-1; restoration $25; inactive status and reactivation $20 each; reinstatement $50 per twelve-month period or fraction following termination, capped at $150. No duplicate-license or change-of-information amount is published, and none is stated.

Renewal runs on the birth month: annually, on or before the last day of the licensee’s birth month, with the fee and proof of continuing education — at least six hours obtained in the twelve months before renewal, in business, job safety, codes relating to HVAC, or subject matter directly relating to the trade, with more than two hours of safety practices and procedures not accepted, one hour of class meaning fifty minutes, excess hours carried forward into the two successive educational years up to twelve hours, and a first renewal within twelve months of initial issuance exempt. A renewal, restoration, reinstatement, or reactivation application shall be denied for non-payment or education non-compliance.

A sixty-day grace period follows expiration, during which the licensee may continue to practice and restore the license for the renewal fee plus $25; after it, the license terminates. Reinstatement remains available no later than three years from termination, with no examination required inside that window; beyond it, the former licensee meets every requirement of a new applicant. Inactive status is chosen rather than fallen into: exempt from renewal and education while inactive, but the inactive licensee shall not practice, and working while inactive is grounds for revocation or suspension of every HVAC license and certification held; reactivation costs the renewal fee plus $20 with the annual hours completed in the prior twelve months. A failed applicant may request a retake without resubmitting the registration requirements beyond the examination fee; the rule states no waiting period and no attempt cap. Reciprocity is conditional on a state agreement and substantially equal or greater requirements, with the journeyman form, fee, and experience proof still required; no Kentucky source names a reciprocating state or waives the examination. Federal refrigerant-handling certification is not a Kentucky prerequisite for this license or this examination, in any source pulled.

A study plan for an open-book sitting with unpublished mechanics

An examination with no published count, duration, or outline defeats the usual pacing plan, so this plan is built on what is published. First, master the two books as instruments — answer by lookup, timed, until finding the governing section is reflex. Second, study at the examination editions, with each fuel-gas provision that changed in the 2012 field edition marked as a divergence to hold in both forms. Third, cover the whole content rule — codes, standards, and current practices across installation, maintenance, repair, remodeling, and alteration of all system types; breadth is the only defensible response to an unpublished outline. Fourth, spend nothing on business and law, which the content rule excludes for this tier. Fifth, rehearse the sitting’s actual conditions: in person, on paper, books in hand, results by mail.

The errors this examination is built to catch

Kentucky’s sitting catches layer errors and borrowed facts: studying a merged reference list; answering fuel gas at the field edition in the room where 2009 governs; preparing for a business section the journeyman content rule never contained; pacing by an invented format; claiming the contracting position in scenario judgment; and treating the experience gate as four years, or a year as a calendar label rather than 1,500 continuous hours.

Kentucky in one view

Kentucky in one view is a small system written down completely. One department examines, licenses, and registers; one regulation carries the mechanics; three tiers divide the work; two books examine the journeyman; one sentence sets the pass mark; and one definition — 1,500 hours in a continuous twelve months — measures the experience that earns the seat. Almost every error available here consists of importing something the system does not contain: a vendor, a bulletin, a count, a business section, a third book, a later fuel-gas edition. The examination tests exactly the person the license defines: fluent in the residential and fuel gas codes at the printed editions, current in the trade’s practices, and clear about where the tier’s authority begins and ends.

Frequently asked questions

Who writes and scores the Kentucky journeyman examination?

The Department of Housing, Buildings and Construction. The regulation provides that the HVAC examinations shall be developed, administered, and scored by the Department or its designee, and candidates register directly with the Department on Form HVAC-4.

What is the passing score, exactly as published?

At least seventy (70) percent. The regulation states that an applicant shall pass with a score of at least seventy (70) percent on the examination.

Does Kentucky publish the number of questions or the time allowed?

No. Neither figure — nor any pretest count or outline weighting — appears in the statute, the regulation, the registration form, or the Department’s examination sheet. This guide states none, and candidates should distrust sources that print them as current Kentucky facts.

Is there a practical or hands-on part to the journeyman examination?

No practical, hands-on, or drawing component is published for this examination in any source used for this guide; the examination as sourced is the Department’s in-person, open-book examination.

Which editions should be studied?

The National Fuel Gas Code, NFPA 54, 2009 edition, and the International Residential Code, 2015 edition — the complete journeyman list. Field work applies the 2018 Kentucky Residential Code built on that same 2015 base, but the adopted-codes list prints NFPA 54, 2012 edition, for the field, so fuel gas must be learned at the 2009 examination edition with the divergence kept in view.

Why is there no mechanical code on the journeyman list?

Because the Department’s sheet does not put one there. The International Mechanical Code, 2015 edition, appears on the master examination’s list instead. The two lists are asymmetric as printed, and this program keeps them that way.

How is a year of experience counted?

One year consists minimally of 1,500 hours of HVAC work in a continuous twelve-month period. Two qualifying years under either eligibility route are therefore at least 3,000 hours, arranged as continuous blocks.

What happens after a failed sitting?

The applicant may request to retake the examination and, except for the examination fee, need not resubmit the registration requirements. No waiting period or attempt cap is stated in the rule. Separately, an examination application left incomplete for one year from the first notice of examination is void.

What does renewal cost, and what education does it require?

The renewal fee is $50, and renewal requires at least six hours of approved continuing education obtained in the twelve months before renewal, in the named subject areas, with no more than two hours of safety practices and procedures counted.

What if the license expires?

A sixty-day grace period follows, during which the licensee may continue to practice and restore the license for the renewal fee plus a $25 restoration fee. After the grace period the license terminates; reinstatement within three years of termination requires no examination, and after three years the former licensee applies as a new applicant.

When does enrollment open for the PassProfessor program?

The program is in the works and enrollment is not yet open. Leave an email address on this page and PassProfessor will write to you when the program is ready — and only about this program.