Georgia HVAC Exam Guide: Class I and Class II Licensing, the PSI Exam, and What to Study

Georgia HVAC Exam Guide: Class I and Class II Licensing, the PSI Exam, and What to Study

PassProfessor’s Georgia HVAC Exam Prep is built for candidates for Georgia’s Conditioned Air Contractor license — Class I and Class II — tested under the Georgia Construction Industry Licensing Board’s Division of Conditioned Air Contractors. The bank holds 1,550 original practice questions: a 1,250-question HVAC core covering the trade itself, plus 300 Georgia questions built on the exam’s own published content outline.

Georgia’s conditioned air licenses

Georgia licenses conditioned air contractors through the Division of Conditioned Air Contractors of the Construction Industry Licensing Board, under Title 43, Chapter 14 of the Georgia Code. Class I licenses are restricted — systems up to 60,000 Btu/h of cooling capacity and 175,000 Btu/h of gas heating input. Class II licenses are unrestricted. Licensees hold either a restricted (Class I) or non-restricted (Class II) card.

The PSI exam

PSI administers the exam in two parts of 3.5 hours each. You will answer 120 questions in all: 100 scored questions plus 20 pretest questions that do not count. Passing is a minimum final scaled score of 70. The published outline weights System Design at 55%, Installation at 25%, Maintain and Repair at 12%, and Regulations and Administration at 8%.

The 2024 code transition

Georgia adopts the International Codes with state amendments. Exams earlier in the 2026 cycle allowed either the 2018 or the 2024 Georgia code books; exams from May 1, 2026 are keyed to the 2024 codes only. Study the 2024 International Mechanical Code, the 2024 International Fuel Gas Code, and the 2024 International Residential Code, each with Georgia amendments.

SB 553 and Chapter 14

Effective July 1, 2026, SB 553 repealed and reenacted Title 43, Chapter 14. The conditioned-air license requirement now sits at § 43-14-14, and the definitions — including the Class I size limits — sit at § 43-14-2. Board forms and older study materials that cite the former § 43-14-8 are citing a repealed section; the license requirement itself did not change.

Experience and endorsement

Board rules call for four years of experience, including at least two years of secondary experience and at least one year of primary experience, with your application endorsed by a licensed conditioned air contractor, a Georgia-licensed professional engineer, or an authorized municipal or county inspector. After licensure, 4 hours of continuing education are due each year.

How this program is organized

The bank is 1,550 questions: a 1,250-question trade core plus a 300-question Georgia delta built to the exam outline’s own weights — system design 55%, installation 25%, maintain and repair 12%, and Georgia law and administration 8% (including the 2024 Georgia mechanical and fuel gas codes). The course runs a free sample, a full timed practice exam, and a drill for each of the 21 topics.

Study strategy

Start with the free sample. Weight your drilling the way the exam weights its outline — system design first — and read every explanation as you go. Finish with full timed practice exams until the 70% benchmark feels routine.

How the practice score works

Our practice exam is scored against a 70% practice benchmark, set to mirror PSI’s published minimum final scaled score of 70 for the Georgia exams. PRACTICE BENCHMARK ONLY — your score here is a study signal, not a result on the real exam.

The program: Product: /product/georgia-hvac-exam-prep/ — $79.

Enroll now — $79 for the full program