Alabama Refrigeration Contractor Exam Guide: Scope First, the IMC 2021 at the Centre, and a Separate License in Full

Alabama certifies refrigeration contractors through the State Board of Heating, Air Conditioning, and Refrigeration Contractors, for work defined by controlling temperature, humidity, or both for the intended use of a specific space, other than for human comfort. The Refrigeration examination given by Prov runs 90 questions in 240 minutes, open book, at 70% to pass, and it keys code content to the International Mechanical Code 2021. This guide works outward from scope to the sitting and then to the credential’s annual life. The companion program page is at /alabama-refrigeration-contractor-exam-prep/.

This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.

The credential at a glance

ItemVerified position
ProgramAlabama Refrigeration Contractor: the certified refrigeration contractor credential
AuthorityState Board of Heating, Air Conditioning, and Refrigeration Contractors
Statute and rulesAla. Code Title 34, Chapter 31; Ala. Admin. Code Title 440-X, Chapters 1–6
Examination vendorProv, Inc., under Candidate Information Bulletin AL CIB 2026.10.31, Version 1.0, effective October 31, 2026
Examination90 questions / 240 minutes / OPEN BOOK / offered in English
Passing standard70% to pass, stated in that percentage form
Outline accounting64 trade questions + 26 embedded business and law questions = 90
Tested code keyInternational Mechanical Code 2021, with International Residential Code 2021 and NFPA 70 — National Electrical Code 2020 also listed
Examination fee layerNo fee is paid to Prov; the Board’s written examination fee is $175
BondPerformance bond of $20,000 to the Board
RenewalAnnual, by December 31; four hours of continuing education every year
Companion page/alabama-refrigeration-contractor-exam-prep/
Administrator notePassProfessor is independent and is not affiliated with the Board

Scope leads this guide because scope leads this license. The statute first defines a kind of work — temperature and humidity control for a space’s intended use, other than human comfort — then requires certification for the function performed, then examines the contractor, and only then surrounds that contractor with fees and renewal duties.

Scope in depth: the definition, the examples, and the edge

Refrigeration means the use of mechanical or absorption equipment to control temperature, humidity, or both, in order to satisfy the intended use of a specific space, other than for human comfort. A certified refrigeration contractor is any person engaged in the business of refrigeration contracting and servicing, installation, and repair, and any person or legal entity applying for a refrigeration license must satisfy all licensure requirements before issuance. Installation means setting up or installing a refrigeration system for operation and use; service and repair means maintaining for operation a system previously installed, including parts replacement within a piece of equipment. The Board’s guidance applies the definition to its trade plainly: the Refrigeration examination covers installation, service, and repair on commercial refrigeration equipment — walk-in coolers, reach-in coolers, commercial refrigerators, and refrigerated storage are the examples the Board itself gives. A grocery’s walk-in, a restaurant’s reach-in line, a warehouse’s refrigerated storage: those settings, where the cooled space serves product and process rather than the comfort of the people in it, are the centre of this credential.

The definitional contrast with the companion certification is stated at exactly the level the sources state it, and no further. The heating and air conditioning certification is defined by heating and air conditioning contracting — the human-comfort heating and cooling credential in the same chapter — while this certification is defined by refrigeration as defined above. Each certification is required for the function performed. This guide composes no freestanding prohibition sentence beyond that definitional structure, because the sources pulled state the pair at that level and preparation is safest when it reasons from the definitions themselves: describe the work, name its purpose, and the credential follows.

The exemption edge completes the scope picture, recorded as exemptions rather than as permissions. Chapter 31 does not apply to work on motor vehicles, residential refrigerators, or ice machines; to household appliances, farm equipment, or poultry operations as the statute describes them; or to authorised government employees acting within their employment. It does not apply, with the carve-back the source states, to mobile homes and manufactured structures under the Alabama Manufactured Housing Commission. Liquefied petroleum gas licensees are exempt as the statute states, including the condition that such an appliance not be connected to a refrigeration system. Rule exemptions add retail sellers, a building owner working on the owner’s own building, and a regularly employed maintenance person working incidentally on the employer’s premises. Candidates should be able to place a described worker on the correct side of each line and say why.

The framework: two licenses, a person in responsible charge, no ladder beneath

Chapter 31 creates no journeyman, technician, master, or apprentice license or registration class in current law. Its credentials are the two certified-contractor licenses — this one and heating and air conditioning — together with inactive status and the separate Duct Air Tightness Testing Contractor registration, a registration rather than a certification whose registrants are not required to become certified contractors. No person may advertise, solicit, bid, obtain permits, do business as, or perform the function of a certified contractor unless the person in responsible charge is a certified contractor, and a certified contractor may not permit the use of his or her license by any other person. Certification is additionally required by rule for at least one person in responsible charge employed by realty management companies performing covered work on property owned by a party other than themselves, and for work involving air duct cleaning, filter changing, test and balance, and the cleaning of covered equipment or systems, as the rule lists them.

Entity certification runs through the person in responsible charge, who must be regularly employed — an actual employee, not an independent contractor, paid on a W-2 and averaging thirty or more hours per week — or an owner, partner, or corporate officer, with the skill, knowledge, and experience to supervise, direct, manage, and control the entity’s work. Certification issues in that person’s name and includes the business organisation’s name. That person is responsible for electrical work and gas piping from the appliance to the means of disconnect, related to commercial refrigeration equipment within this framework. On severance, contractor and entity notify the Board within five days and the entity immediately ceases covered work until a certified contractor is approved. On death or incapacitation, written notice is due within forty-five days and an emergency certification runs no longer than ninety days.

Eligibility and application

All prospective certified contractors must stand for a written examination before the Board. Eligibility requires 3,000 hours of work experience, as defined by the Board, or graduation from an approved heating, air conditioning, or refrigeration curriculum. That is the operative formulation in current law, and this guide states it in exactly those terms. The Board examines the character, fitness, and qualifications of every applicant, on Board-prescribed forms and on payment of all prescribed fees.

Documentation requires the application plus one of: signed, notarized employer affidavit or affidavits swearing the applicant worked in the field at least two years within the past five years, with all corresponding W-2 forms; and/or certificates showing at least 3,000 hours of educational training; or proof of graduation from an approved curriculum. Candidates with a long certificate from any public Alabama two-year or community college are approved. Each employer’s affidavit is signed and notarized by the applicant’s licensed supervisor. All applicants must be United States citizens or legally present with appropriate federal documentation, and the Board may require a background check prior to applying. No minimum age requirement and no dollar job threshold appear in the sources as pulled; certification attaches to the work, never to a contract price.

Timing is exact. Examination applications must be complete and received by the Board office no later than 4:30 p.m. ten full working days before the Board’s meeting date to be assured consideration at that meeting, and applications not complete within twelve months of filing may be considered abandoned and discarded. Applicants must stand for the examination within one year from the date the Board receives the application and fees, otherwise application and fees must be resubmitted. Local entities are prohibited from requiring further local testing of certified contractors, subject to applicable local privilege, license, or business fees.

The sitting: mechanics and outline

Prov administers this examination by computer at sixteen testing locations in Alabama, at any Prov center in the United States, and remotely from home. Scheduling runs through Prov’s scheduler for the Alabama Board of HACR or by phone or text; rescheduling or cancelling is free at least three days before the examination date, otherwise the fee is forfeited. The registration name must match the government-issued photo identification exactly, on pain of dismissal and forfeiture; identification must be current, photo-bearing, and signature-bearing. Prov grades the examination immediately upon completion and forwards results to the licensing authority. There is no penalty for guessing. Disability accommodations require written documentation from a licensed physician or psychologist. This sitting is a separate examination for a separate license, under the same bulletin as its sibling — the bulletin is shared, the papers are not.

The outline accounts for every question, in this examination’s own cells. General Knowledge carries 14. Systems and Sizing carries 14. Piping carries 13. Maintenance and Troubleshooting carries 13. Electrical Applications for Refrigeration Systems carries 8. Plan Reading carries 2. That trade block totals 64. The embedded business and law block totals 26, distributed as Licensing Laws 4, Estimating 3, Payroll and Employment Taxes 3, Financial Management 3, Risk Management 2, Project Management 2, Safety and Environmental 2, Labor Laws 2, Contracts 2, Lien Laws 2, and Business Organization 1. Together they make 90. The areas sit inside this single examination; the bulletin lists no standalone business and law examination. Importing the companion block’s larger subtotal or any of its per-area cells into this program would misstate this paper, and this guide does neither.

The tested list and the IMC verdict

The tested references, complete and all marked open book, are: the Code of Federal Regulations, Title 29, Part 1926, in the edition the bulletin lists, with the OSHA Standards for the Construction Industry permitted as a substitute and candidate printed versions permitted if the examination is open book; the International Mechanical Code 2021; the International Residential Code 2021; the Board’s Laws, Rules and Regulations book as the bulletin lists it; the NASCLA Contractors Guide to Business, Law and Project Management, 14th edition; NFPA 70 — National Electrical Code 2020; and Refrigeration and Air Conditioning Technology, 9th Edition.

This examination keys the International Mechanical Code 2021 — the only mechanical code edition keyed to any Alabama examination for this Board in the current bulletin — plus the International Residential Code 2021 and the National Electrical Code 2020. The mirror discipline binds in the other direction: the companion list’s absence of a mechanical code must never be stated for this examination, and this examination’s key must never be extended to its sibling. The federal safety reference’s listed substitution rule is part of the list itself: the substitute is permitted because the bulletin permits it, in the form the bulletin states.

Field standards and construction adoption: two further layers, kept apart

Board minimum standards for commercial refrigeration require compliance with the mechanical code including appendices, the electrical code, ASHRAE Standard 15-2019 as the safety standard the rule names, the business guide, manufacturers’ instructions, and other applicable codes, with the most restrictive governing on a conflict. No edition is stated in that rule, so this layer is given none here, and the safety standard’s presence in the field layer does not make it a tested reference. Every certified contractor must also provide the Board, on request, copies of load calculations, plans, drawings, and related information for work performed.

Construction adoption is a third system. The State Building Code layer, built on the 2021 code family and the 2020 electrical code, binds only its listed jurisdictions — state-owned property and state funds, schools, hotels and motels, and movie theaters — and within that layer specified refrigeration provisions have already been replaced with later counterparts, a detail irrelevant to the examination list. There is no single statewide mechanical code for ordinary private commercial work in the sources pulled. Answer the sitting from the bulletin’s books; build and service under the standards governing the site.

Open-book handling

The book title must be exact, while older and newer editions are always permitted. Substitutes and photocopies are allowed only as the examination details state — the federal reference line carries its own stated permission. Permanent tabs are permitted; repositionable tabs and sticky notes are not. Highlighting and underlining may be carried in pen only, with no marking added during the examination. Handwritten formulas in pen or ink only, written before the examination, are allowed when authorised; no other handwritten notes may be added. For a mechanical-code paper, tab by system and by the outline’s order until a described installation points to its provision in seconds.

Passing, retakes, and the practical alternative: regimes kept apart

The passing standard, in the only form the sources publish it, is 70% to pass. This guide states it in that percentage form only and states no raw count of questions in place of it, for this examination as for its sibling. The target a candidate paces against is a proportion of the whole paper, trade and embedded business together.

Retake handling comes from separate sources, stated separately because no source pulled reconciles them. Under Prov’s regime, fresh Board approval is required before each attempt, a candidate who does not pass must wait thirty days before retesting, and an examination once passed cannot be retaken unless required by the licensing authority. Under the statute and rule regime, an applicant who fails the written examination may, on specific written request to the Board, take a practical examination equivalent to the written examination within six months from the date of the last unsuccessful written examination. That route is stated at exactly the level the sources state it — equivalence, written request, six-month window, and its Board fee below. No practical outline exists in the sources, so a written preparation program cannot rehearse that sitting’s unpublished content, and this program does not pretend otherwise; candidates weighing that route should take its shape from the Board directly. The one-year application window is a third discipline, governing the life of an application and its fees, and is not a retake rule.

Fees in their separate instruments, the bond, and the insurance position — stated for this license

No examination fee is paid to Prov; examination fees are handled through the licensing authority, paid to the State in the bulletin’s terms, and stated in this guide for this license in full rather than by cross-reference. The Board schedule in Rule 440-X-3-.10 is: written examination, $175; practical examination, $375; initial certification for an active refrigeration license, $220; annual renewal for an active refrigeration license, $220; initial certification for an inactive license, $110; annual renewal for an inactive license, $110; late fee for a renewal received after December 31, $250; Continuing Education Deficiency fee, $25; dishonored check fee, $30; and printed certification cards, $25. Examination fees are in addition to certification, renewal, inactive, and late fees; all fees are submitted with the application and no part is refunded; credit-card processing service fees may be passed through. The statute’s general cap on Board charges is a limit on the Board, not a candidate line item, and is not presented here as a charge.

The performance bond required of applicants for this certification is $20,000 to the Board, with proof of bond potentially required annually during renewal. On insurance, the verified position is a negative, stated for this license as plainly as for its sibling: no general liability insurance dollar minimum appears in the statute or rules as pulled, and none is stated here. Risk Management is an embedded examination area, and nothing more in the sources.

Reciprocity and military routes

The Board may enter into reciprocity agreements with other states, with all certification fees still required. By rule, an individual may qualify holding a current and valid license in a qualifying reciprocal state with no previous or pending disciplinary action. Current Board guidance requires that the applicant have passed an equivalent examination with a score of at least 70% — a reciprocity threshold, recorded in its own place — and hold a current and valid license with one of eight listed authorities in Mississippi, Tennessee, Ohio, South Carolina, Texas, West Virginia, or Louisiana, as the Board’s page names them. Reciprocal applications cannot be processed online, the processing fee is $220 and non-refundable, and a $20,000 performance bond in the business name listing the Board as obligee is required.

For military and federal personnel, the Board may accept Armed Forces, reserves, National Guard, military reserves, or naval militia education, training, or service as sufficient education or experience to sit for examination. After military orders or a federal-government transfer to Alabama, the Board may waive the examination for qualifying military or federal government personnel and military spouses holding a current and valid license or certification elsewhere as the rule describes, and will waive the licensing fee for military spouses on initial certification during an ordered transfer of station.

Holding the credential

Renewal is annual, not later than December 31. A license is current only during its calendar year, lapsing if not renewed prior to 11:59 p.m. on December 31. Continuing education requires at least four hours every year, with up to four hours carried over, proof before November 1, and no requirement in the first year. One hour is at least fifty minutes, hours are awarded in two-hour increments up to eight, and courses may not be repeated within the earning period.

Deficiency routes run through a Board-approved plan for medical hardships and emergencies submitted by January 1, and a written extension appeal after November 1 but before January 1, received prior to December 30, with late fees past December 31 and the $25 deficiency fee as charged. An inactive contractor aged sixty-five or older is exempt from continuing education from the year after turning sixty-five and must submit eight hours to return to active status after that age; the exemption never applies to active certifications. A lapsed contractor has until December 31 of the following calendar year to renew with the $250 late fee and without additional testing; at one calendar year or more unlicensed, the contractor is expired and must pass the written examination before relicensure. Inactive status is elected by written notice; an inactive contractor may not purchase local licenses, be issued permits, or solicit or bid for covered work, and reactivates by written notice, proof of bond, and payment of the fee difference. Display requires the certification number and company name on all documentation, advertising, and vehicles — on vehicles prominent and legible, at least two inches in height, on at least two sides, with AL Number, AL No., or AL# before the number.

A study plan built on scope

Study outward from the definition. First, scope sorting: drill described jobs against the definition and the exemption edge until the credential for each job is named before any code book opens. Second, the mechanical code key: work the International Mechanical Code 2021 by the outline’s order as the paper’s centre of gravity. Third, sizing and troubleshooting as methods: load reasoning for cooled spaces by intended use, and systematic fault-finding on described commercial equipment. Fourth, the supporting list in its places: the residential code where listed, the 2020 electrical code, the federal safety reference, and the technology text. Fifth, the embedded business block in this examination’s own distribution, inside timed practice. Sixth, the Alabama delta and open-book performance: eligibility, responsible charge, fees, bond, renewal, and lookup speed under time.

The errors this examination is built to catch

Scope errors come first here. Answering from comfort habit misplaces the credential entirely. Carrying the sibling’s library replaces this list’s mechanical key with a book this sitting does not list. Importing the sibling’s figures substitutes a larger count, longer time, and larger business block for this paper’s own 90, 240, and 26. Merging fee layers sends a fee to a vendor who receives none. Quoting a bond from an older form displaces the rule’s $20,000 requirement. Inventing an insurance mandate adds a requirement the sources do not contain. Reading field standards as tested references drags a field-only safety standard into the tested list. Merging the retake regimes misstates three separate disciplines as one rule. Name the layer first.

What the PassProfessor program will cover

The program page at /alabama-refrigeration-contractor-exam-prep/ describes the program in full. In brief, it follows this guide’s order: scope first, mechanical-code work at the centre, sizing and troubleshooting as methods, the embedded business block in this examination’s distribution, and the Alabama certification system as the operating frame. Every item is written from scratch against primary sources. PassProfessor is an independent preparation provider, not affiliated with the Board; completing the program confers no certification.

Tell me when enrollment opens. The Alabama Refrigeration Contractor program is in the works and enrollment is not yet open. Leave an email address and PassProfessor will write to you when the program is ready — and only about this program.

Frequently asked questions

How does Alabama define refrigeration?

As the use of mechanical or absorption equipment to control temperature, humidity, or both, to satisfy the intended use of a specific space, other than for human comfort.

What commercial work illustrates that definition?

The Board’s own examples: walk-in coolers, reach-in coolers, commercial refrigerators, and refrigerated storage, across installation, service, and repair.

How large is the Refrigeration examination, and how is it divided?

90 questions in 240 minutes: 64 trade questions — General Knowledge 14, Systems and Sizing 14, Piping 13, Maintenance and Troubleshooting 13, Electrical Applications 8, Plan Reading 2 — plus 26 embedded business and law questions.

What is the passing standard, exactly as published?

70% to pass. The bulletin states the standard in that percentage form for this examination, and this guide states no raw count in its place.

Why is the mechanical code central here but absent from the companion list?

Because the two lists are built differently, as a stated fact of the pair: this list keys the International Mechanical Code 2021, and the companion list contains no mechanical code in any edition.

What happens after a failed written attempt?

Two separate regimes are sourced: Prov requires fresh Board approval before each attempt and a thirty-day wait, and the statute and rules provide, on specific written request to the Board, a practical examination equivalent to the written examination within six months of the last unsuccessful written attempt, at the Board’s $375 practical examination fee. No practical outline is published in the sources, and no written program can rehearse that sitting’s unpublished content.

How much continuing education does renewal require?

At least four hours every year, with proof before November 1, up to four hours carried over, and no requirement in the first year of certification.

What bond and insurance does certification require?

A $20,000 performance bond to the Board. No general liability insurance dollar minimum appears in the statute or rules as pulled, and none is stated here.

When does enrollment open for the PassProfessor program?

The program is in the works and enrollment is not yet open. Leave an email address on this page and PassProfessor will write to you when the program is ready — and only about this program.