Alabama Heating & A/C Contractor Exam Guide: The IRC Pathway, the Embedded Business Block, and the Certification Around the Sitting

Alabama certifies heating and air conditioning contractors through the State Board of Heating, Air Conditioning, and Refrigeration Contractors. The Heating and Air Conditioning examination given by Prov runs 115 questions in 300 minutes, open book, at 70% to pass, and it keys its code content through the International Residential Code 2021 and the National Electrical Code 2020. This guide follows that pathway from eligibility to renewal. The companion program page is at /alabama-heating-and-ac-contractor-exam-prep/.

This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.

The credential at a glance

ItemVerified position
ProgramAlabama Heating & A/C Contractor: the certified heating and air conditioning contractor credential
AuthorityState Board of Heating, Air Conditioning, and Refrigeration Contractors
Statute and rulesAla. Code Title 34, Chapter 31; Ala. Admin. Code Title 440-X, Chapters 1–6
Examination vendorProv, Inc., under Candidate Information Bulletin AL CIB 2026.10.31, Version 1.0, effective October 31, 2026
Examination115 questions / 300 minutes / OPEN BOOK / offered in English
Passing standard70% to pass, stated in that percentage form
Outline accounting84 trade questions + 31 embedded business and law questions = 115
Tested code pathwayInternational Residential Code 2021 and NFPA 70 — National Electrical Code 2020
Examination fee layerNo fee is paid to Prov; the Board’s written examination fee is $175
BondPerformance bond of $20,000 to the Board
RenewalAnnual, by December 31; four hours of continuing education every year
Companion page/alabama-heating-and-ac-contractor-exam-prep/
Administrator notePassProfessor is independent and is not affiliated with the Board

This guide is organised the way the credential itself is organised: definition first, then the sitting through its code pathway, then the Board systems around it. Almost every costly Alabama error is a layer error: a field standard mistaken for a tested reference, or a vendor rule mistaken for a Board rule.

The work the credential covers, in the statute’s terms

A certified heating and air conditioning contractor is a person engaged in the business of heating and air conditioning contracting and installation or service and repair. The system being worked on is a heating or cooling apparatus consisting of an air heating or cooling fixture from pipes, plenums, or blowers, including any accessory and equipment installed in connection within the system. Window units and automotive or farm implement type equipment stand outside that definition. Installation is setting up or installing a system for operation and use. Service and repair is maintaining for operation a system previously installed, including parts replacement within a piece of equipment. Those definitions do real work in preparation: they tell the candidate what the examination’s scenarios are about, and they mark the boundary of the credential by the function performed rather than by a dollar value. No dollar job threshold appears in the statute or rules as pulled, and certification attaches to the work itself.

The prohibition that enforces the system is broad. No person may advertise, solicit, bid, obtain permits, do business as, or perform the function of a certified contractor unless the person in responsible charge is a certified contractor, and a certified contractor may not permit the use of his or her license by any other person. Rule additions require certification for realty management companies performing such work on property owned by others, and for air duct cleaning, filter changing, test and balance, and equipment cleaning services. A retail seller who does not provide for service, repair, or installation stands outside the definition. A certified contractor is authorised to install, service, repair, or replace natural gas appliances within this credential, including in manufactured housing set up as stationary housing, excluding the piping to such appliances, except as otherwise prohibited by law.

Two working boundaries belong in any serious preparation. A certified contractor who does not hold the appropriate gas fitter’s license, when performing work involving gas connections, works only the gas piping after the shut-off valve to the unit, ahead of all controls, conforming to all applicable codes on permits, licenses, and inspections. The person in responsible charge is responsible for electrical work, including circuit protection and wiring, from the appliance to the means of disconnect, and for gas piping from the appliance to the means of disconnect. One narrow exception exists: a certified contractor responsible for permits may subcontract installation of duct work only to an uncertified person working under that contractor’s supervision, remaining responsible for the work.

The framework around the individual: person in responsible charge

Chapter 31 creates no journeyman, technician, master, or apprentice class in current law. The credentials in the current statute and rules are the two certified-contractor licenses — this one and Refrigeration — together with inactive status and a separate Duct Air Tightness Testing Contractor registration, which is a registration rather than a certification and whose registrants are not required to become certified contractors. Preparation drawn from trades that organise around a journeyman ladder will mislead here unless it is corrected at the start: Alabama organises this trade around the certified contractor and the person in responsible charge.

Entity certification runs through that person, who must be regularly employed — an actual employee, not an independent contractor, paid on a W-2 and averaging thirty or more hours per week — or an owner, partner, or corporate officer, with the skill, knowledge, and experience to supervise, direct, manage, and control the entity’s work. Certification issues in that person’s name and includes the business organisation’s name. On severance, contractor and entity notify the Board within five days and the entity immediately ceases covered work until a certified contractor is approved. On death or incapacitation, written notice is due within forty-five days and an emergency certification runs no longer than ninety days.

Eligibility: the two routes the current statute states

All prospective certified contractors must stand for a written examination before the Board. An applicant is eligible to stand for the examination if the applicant has completed 3,000 hours of work experience, as defined by the Board, or is a graduate of an approved heating, air conditioning, or refrigeration curriculum. That is the operative formulation in current law, and this guide states eligibility in exactly those terms. The Board examines the character, fitness, and qualifications of every applicant, on Board-prescribed forms and on payment of all prescribed fees, and a person applying for this license must personally satisfy all licensure requirements before the license issues. Certifications issue only to individuals or legal entities who properly submitted the appropriate applications and took and passed the Board’s written examination or the practical examination provided by law.

Application documentation requires the application plus one of: signed, notarized employer affidavit or affidavits swearing the applicant worked in the field at least two years within the past five years, with all corresponding W-2 forms; and/or certificates showing at least 3,000 hours of educational training; or proof of graduation from an approved curriculum. Candidates with a long certificate from any public Alabama two-year or community college are approved. Each employer’s affidavit is signed and notarized by the applicant’s licensed supervisor. All applicants must be United States citizens or legally present with appropriate federal documentation, and the Board may require a background check prior to applying, after which it determines fitness to sit. No minimum age requirement appears in the sources as pulled, and none is stated.

Timing disciplines the application. Examination applications must be complete and received by the Board office no later than 4:30 p.m. ten full working days before the Board’s meeting date to be assured consideration at that meeting. Applications not complete within twelve months of filing may be considered abandoned and discarded. By statute, applicants must stand for the examination within one year from the date the Board receives the examination application and fees, otherwise the applicant must resubmit an application and appropriate fees. Counties, municipalities, and other local entities are prohibited from requiring further local testing of certified contractors, subject to payment of applicable local privilege, license, or business fees.

The sitting: mechanics, outline, and the embedded business block

Prov administers the written examination by computer at sixteen testing locations in Alabama, at any Prov center in the United States, and remotely from home. Scheduling runs online through Prov’s scheduler for the Alabama Board of HACR, or by phone or text. Rescheduling or cancelling is free at least three days before the examination date; otherwise the fee is forfeited. The registration name must match the government-issued photo identification exactly; a mismatch means dismissal and forfeiture. Identification must be current, photo-bearing, and signature-bearing. Prov grades the examination immediately upon completion and forwards results to the licensing authority. There is no penalty for guessing. Disability accommodations require written documentation from a licensed physician or psychologist.

The outline accounts for every question. Systems and Sizing carries 25. General Knowledge carries 12. Equipment carries 12. Piping carries 11. Maintenance carries 11. Electrical Applications for HAC Systems carries 10. Plan Reading carries 3. That trade block totals 84. The business and law block, embedded inside the same examination, totals 31: Business Organization 3, Risk Management 3, Project Management 2, Estimating 3, Safety and Environmental 3, Labor Laws 3, Payroll and Employment Taxes 3, Financial Management 3, Contracts 3, Lien Laws 2, and Licensing Laws 3. Together they make 115. Business content here is not a separate examination, in either a separate sitting or a separate fee, and preparation that defers it to a later sitting that does not exist leaves a quarter of this paper unprepared.

The code pathway in depth: what is tested, what is field, what is adopted

Three layers must never be merged. The tested layer is the bulletin’s reference list. For this examination it reads, in full: the NASCLA Contractors Guide to Business, Law and Project Management, 14th edition; the International Residential Code 2021; the Board’s Laws, Rules and Regulations book as the bulletin lists it, with candidate printed versions allowed at testing sites; Manual D: Residential Duct Systems, Third Edition, Version 2.5; Residential Load Calculation — Manual J-Abridged, 8th edition; Refrigeration and Air Conditioning Technology, 9th Edition; the Trane Ductulator, 2013, with an ACCA ductulator also allowed; and NFPA 70 — National Electrical Code 2020. Every item on the list is marked open book.

Inside that list, the edition verdict for this examination is exact. The only ICC code book present is the International Residential Code 2021, which carries the residential mechanical and fuel-gas chapters for the houses this credential serves. Electrical work keys to the National Electrical Code 2020. The list contains no International Mechanical Code in any edition and no International Fuel Gas Code in any edition. That absence is the Alabama fact candidates most need defended against habit, because the companion Refrigeration list is built differently and because general summaries of Alabama heating work often reach for a mechanical code. For this sitting, code questions are answered from the residential code and the listed craft references, and from no other code book.

The field layer is different by design. Board minimum standards name, without editions, a family of standards for residential and commercial work — codes, load and duct manuals, duct construction standards, the business guide, manufacturers’ instructions, and applicable codes, with the most restrictive governing on a conflict. No editions are stated in that rule, so this guide gives that layer none and never treats it as the examination list. Every certified contractor must also provide the Board, on request, copies of load calculations, duct design and gas piping plans, drawings, and related information for work performed.

The adopted, construction layer is different again, and fragmented. The State Building Code, built on the 2021 code family and the 2020 electrical code, binds only its listed jurisdictions — state-owned property and state funds, schools, hotels and motels, and movie theaters — and not ordinary residential or commercial property outside them. Separately, a statewide residential floor rests on an earlier residential code as modified by rule, effective in 2016. Neither position changes the bulletin’s list by one book.

Open-book handling as an examined skill

Prov’s rules require the exact book title, while older and newer editions are always permitted. Substitutes and photocopies are allowed only as the examination details state. Permanent tabs are permitted; repositionable tabs and sticky notes are not. Highlighting and underlining may be carried in pen only, with no marking added during the examination. Handwritten formulas in pen or ink only, written before the examination, are allowed when authorised; no other handwritten notes or formula sheets may be added. Tab the residential code by the systems the outline names, and treat every slow lookup in practice as a defect to repair before the sitting.

Passing, retakes, and the practical alternative: three regimes, kept apart

The passing standard, in the only form the sources publish it, is 70% to pass. This guide states it in that percentage form only and states no raw count in its place: the target is a proportion of the whole paper, trade and embedded business together.

Retake handling comes from separate sources, kept separate because no source reconciles them. Under Prov’s regime, fresh Board approval is required before each attempt, a candidate who does not pass must wait thirty days before retesting, and an examination once passed cannot be retaken unless required by the licensing authority. Under the statute and rule regime, a failed applicant may, on specific written request to the Board, take a practical examination equivalent to the written examination within six months of the last unsuccessful written attempt. That route is stated at exactly the level the sources state it — equivalence, written request, six-month window, and its Board fee below. No practical outline exists in the sources, and a written program cannot rehearse a sitting whose content is unpublished; candidates weighing that route should take its shape from the Board directly. The one-year application window is a third, separate discipline, not a retake rule.

Fees in their separate instruments, the bond, and the insurance position

No examination fee is paid to Prov. Examination fees are handled through the licensing authority, and the bulletin’s own language is that the examination fee is paid to the State. The Board schedule in Rule 440-X-3-.10, stated as separate instruments, is: written examination, $175; practical examination, $375; initial certification for an active license, $220; annual renewal for an active license, $220; initial certification for an inactive license, $110; annual renewal for an inactive license, $110; late fee for a renewal received after December 31, $250; Continuing Education Deficiency fee, $25; dishonored check fee, $30; and printed certification cards, $25. Examination fees are in addition to certification, renewal, inactive, and late fees. All fees are submitted with the application, and no part of any fee is refunded. The Board may pass through credit-card processing service fees. Candidates budgeting for this credential should list each instrument they will actually trigger — written examination, bond, active certification — and leave the rest as contingencies, which is how the rule presents them.

The performance bond required of applicants for this certification is $20,000, provided to the Board, with proof of bond potentially required annually during renewal. That rule figure is the requirement this guide states. On insurance, the verified position is a negative: no general liability insurance dollar minimum for this certification appears in the statute or rules as pulled. This guide states none. Risk Management appears in this credential as an embedded examination area, and nowhere in the sources as a dollar insurance mandate.

Reciprocity and military routes

The Board may enter into reciprocity agreements with other states, with all certification fees still required. By rule, an individual may qualify holding a current and valid license in a qualifying reciprocal state with no previous or pending disciplinary action. Current Board guidance requires that the applicant have passed an equivalent examination with a score of at least 70% — a reciprocity threshold, stated in its own place and not as a second statement of this examination’s standard — and hold a current and valid license with one of eight listed authorities in Mississippi, Tennessee, Ohio, South Carolina, Texas, West Virginia, or Louisiana, as the Board’s page names them. Reciprocal applications cannot be processed online; the processing fee is $220, non-refundable, and a $20,000 performance bond in the business name listing the Board as obligee is required.

For military and federal personnel, the Board may accept Armed Forces, reserves, National Guard, or naval militia education, training, or service as sufficient to sit for examination. After military orders or a federal transfer to Alabama, the Board may waive the examination for qualifying personnel and military spouses holding a current and valid license or certification elsewhere as the rule describes, and will waive the licensing fee for military spouses on initial certification during an ordered transfer.

Holding the credential: renewal, education, lapse, inactive status, display

Renewal is annual, not later than December 31. A license is current only during the calendar year in which it is issued, lapsing if not renewed prior to 11:59 p.m. on December 31. Continuing education requires at least four hours every year, with up to four hours carried over to the following year. Proof must be submitted before November 1 annually; failure prevents renewal until proof is submitted. No education is required in the first year of certification. One hour is at least fifty minutes, hours are awarded in two-hour increments up to eight, and courses may not be repeated within the earning period.

Deficiency and lapse have exact mechanics. A deficiency plan for medical hardships and emergencies is submitted for Board approval by January 1, and a contractor who cannot submit hours before November 1 must appeal in writing for an extension after November 1 but before January 1, received prior to December 30, with late fees past December 31 and the $25 deficiency fee as charged. An inactive contractor aged sixty-five or older is exempt from continuing education from the year after turning sixty-five, must submit eight hours to return to active status after that age, and the exemption never applies to active certifications. A lapsed contractor has until December 31 of the following calendar year to renew with the $250 late fee and without additional testing. At one calendar year or more unlicensed, the contractor is expired and must sit for and pass the written examination before relicensure.

Inactive status is elected by written notice. An inactive contractor may not purchase local licenses, be issued permits, or solicit or bid for covered work. Reactivation is allowed at any time by written notice, proof of the proper bond, and payment of the fee difference. Display completes the holding duties: the certification number and company name on all documentation, advertising, and vehicles — on vehicles prominent and legible, at least two inches in height, on at least two sides, with AL Number, AL No., or AL# immediately before the number in equal-sized print.

A study plan built on the pathway

Study in the order the examination is built. First, the pathway: learn the residential code’s organisation, paired from the start with the 2020 electrical code. Second, sizing as a craft: load and duct reasoning from the listed manuals, practised as worked problems, because Systems and Sizing is the largest area on the paper. Third, the remaining trade areas in outline order, each studied against the listed references. Fourth, the embedded business block, all eleven areas, inside timed practice from the first full rehearsal. Fifth, the Alabama delta: eligibility, responsible charge, fee instruments, bond, renewal, and the four-hour education rule. Sixth, open-book performance: timed, tabbed rehearsals in which lookup speed is measured and repaired.

The errors this examination is built to catch

The predictable failures are layer failures. Studying a mechanical code for this sitting leaves the residential pathway unlearned. Deferring business study treats 31 embedded questions as if they belonged to a separate examination. Merging the fee layers sends a fee, in the mind, to a vendor who receives none. Quoting a bond from an older form displaces the rule’s $20,000 requirement. Inventing an insurance mandate adds a requirement the sources do not contain. Confusing field or adopted layers with the tested list answers from the wrong layer. Merging the retake regimes misstates both the vendor’s discipline and the statute’s practical alternative. Name the layer a fact lives in before using it.

What the PassProfessor program will cover

The program page at /alabama-heating-and-ac-contractor-exam-prep/ describes the program in full. In brief, it follows this guide’s pathway: residential code work paired with the 2020 electrical code, sizing and duct reasoning, the embedded business block inside timed practice, and the Alabama certification system as the operating frame. Every item is written from scratch against primary sources. PassProfessor is an independent preparation provider, not affiliated with the Board; completing the program confers no certification.

Tell me when enrollment opens. The Alabama Heating & A/C Contractor program is in the works and enrollment is not yet open. Leave an email address and PassProfessor will write to you when the program is ready — and only about this program.

Frequently asked questions

Which bulletin governs this examination?

Prov Candidate Information Bulletin AL CIB 2026.10.31, Version 1.0, effective October 31, 2026, for the Alabama Board of HACR.

How is the 115-question outline divided?

84 trade questions — Systems and Sizing 25, General Knowledge 12, Equipment 12, Piping 11, Maintenance 11, Electrical Applications 10, Plan Reading 3 — plus 31 embedded business and law questions, totalling 115.

What is the passing standard, exactly as published?

70% to pass. The bulletin states the standard in that percentage form for this examination, and this guide states no raw count in its place.

Why does this guide keep returning to the residential code?

Because the bulletin lists the International Residential Code 2021 as this examination’s ICC code book, with electrical work keyed to the National Electrical Code 2020.

Is any mechanical or fuel gas code book on this examination’s list?

No. The Heating and Air Conditioning list contains no International Mechanical Code and no International Fuel Gas Code in any edition.

What happens after a failed written attempt?

Two separate regimes are sourced and neither is merged here: Prov requires fresh Board approval before each attempt and a thirty-day wait, and the statute and rules provide, on specific written request to the Board, a practical examination equivalent to the written examination within six months of the last unsuccessful written attempt, at the Board’s $375 practical examination fee.

Does a written program prepare a candidate for that practical route?

The sources publish no practical outline or content, so no written program can rehearse that sitting as described content. This program prepares candidates for the written examination; the practical route is stated at the level the sources state it.

How much continuing education does renewal require?

At least four hours every year, with proof submitted before November 1 annually, up to four hours carried over to the following year, and no requirement in the first year of certification.

What if a renewal is missed?

A lapsed contractor has until December 31 of the calendar year immediately following the lapse to renew with the $250 late fee and without additional testing; at one calendar year or more unlicensed, the contractor is expired and must sit for and pass the written examination before relicensure.

When does enrollment open for the PassProfessor program?

The program is in the works and enrollment is not yet open. Leave an email address on this page and PassProfessor will write to you when the program is ready — and only about this program.