ATP Stall Prevention Practice Questions

Stall Prevention is one of the seven content areas in PassProfessor’s FAA Airline Transport Pilot (ATM) practice bank, with 105 questions covering stall recognition, prevention and recovery, including high-altitude buffet and icing-related stalls. The FAA publishes no per-area question weights for the ATM knowledge test, so the bank’s area sizes are PassProfessor’s own. Below are four worked practice questions from this area — read every option, commit to an answer, then read the explanation whether you were right or wrong.

THE PROGRAM IN NUMBERS
Fresh
FULL-LENGTH PRACTICE EXAMS
Drawn new for every attempt from the full question bank
Quick
QUICK PRACTICE
Short mini-quiz drills inside the course
20
FREE SAMPLE QUESTIONS
Try the program before you buy
6 months
OF ACCESS
Full access from the day you enroll
Key terms
VOCABULARY MASTERY FLASHCARDS
Mark each term mastered as you learn it

A note on format: the real ATM knowledge test gives you three answer options per question. The questions in this PassProfessor bank give you three options too — the same three-option format as the real test. The facts, calculations, and judgment being tested are the same.

1. Why is the pitch-up tendency of a swept wing at the stall especially dangerous for a transport crew?

A. Pitch-up always stalls the horizontal tail first and guarantees an instant spin

B. Rising nose attitude increases angle of attack still further, which can carry the jet into a deep, fully developed stall if the first warning is not acted on

C. Pitch-up only matters on the ground during rotation for takeoff

Correct: B. The pitch-up is self-reinforcing: nose rises, angle grows, separation spreads, and the nose rises again, so early unloading matters enormously. It does not guarantee a spin or act through the tail first, and the hazard is an in-flight aerodynamic one, not a rotation curiosity.

2. After a stall recovery, when is it appropriate to re-engage the autopilot and resume normal automation?

A. Only once the jet is stabilized at a safe speed and flight path with a healthy stall margin rebuilt

B. Before rolling wings level, so automation can set the bank angle

C. Immediately, at the same moment the nose is lowered, to reduce workload

Correct: A. Automation is a tool for a stable airplane; handing it a jet still inside the recovery invites it to chase pitch and altitude targets that conflict with unloading. Re-engaging before wings level or at the first nose-down input gives the automation a problem it is not designed to solve.

3. What low-speed protection do autothrottle systems typically offer a jet approaching a stall?

A. Autothrottles lock the thrust at idle near a stall to protect the engines

B. Many designs automatically advance thrust or hold a minimum speed target when speed decays toward a protected threshold, backing up the crew energy management

C. Autothrottles are disconnected permanently by the first speed decay

Correct: B. Low-speed protection logic treats decaying speed as a call for energy, waking or driving the autothrottle to defend a minimum speed. Locking at idle would deepen the decay, and a momentary decay does not permanently remove the system.

4. What is the instructional purpose of practicing stall recognition with the autopilot and autothrottle engaged in the simulator?

A. To show crews how automation can mask a developing energy problem behind a stable-looking flight path, and to rehearse recognizing the decay and intervening before protection limits are reached

B. To prove automation always prevents stalls when left alone long enough

C. To teach crews to keep automation engaged through the entire recovery

Correct: A. Automation can hide a slow decay behind smooth control, and the simulator is where crews learn to watch energy trend rather than surface smoothness, then take over early and decisively. Left alone, the automation may fly the jet into the warning, and keeping it engaged through recovery contradicts the template.

These questions are drawn from the full 1,500-question PassProfessor ATP (ATM) bank. The program page explains what is included, the ATP exam guide covers the test itself, and you can take the 20 free sample questions or enroll in the full program.

Disclaimer

PassProfessor is an independent exam-preparation provider. This program is exam preparation only: it is not the real exam, it provides no education credit, and completing it does not by itself qualify you for any license or certification. The real exam is run by its own exam body — you register for it, pay its fees, and sit it through that body, not through PassProfessor. All practice questions in this program are original; they are not actual exam questions.