CSSGB Sample Questions — The Free 20, With Answers Explained

CSSGB Sample Questions — The Free 20, With Answers Explained

This page reproduces, in readable form, the 20 questions served in the PassProfessor CSSGB free sample, exactly as served: 20 content questions spanning all six sections of ASQ’s 2022 Body of Knowledge (Overview: Six Sigma and the Organization ×2 · Define Phase ×4 · Measure Phase ×4 · Analyze Phase ×4 · Improve Phase ×3 · Control Phase ×3), at the served difficulty mix of 5 easy, 7 medium, 5 hard and 3 stretch, every answer explained, and none of them about the exam itself. You can also take the sample as a quiz. The full program is CSSGB — Certified Six Sigma Green Belt Exam Prep; the exam record is explained in the CSSGB exam guide.

Overview: Six Sigma and the Organization · easy

1. Regarding failure mode and effects analysis purpose at overview level, which statement is correct?

  1. At overview level, failure mode and effects analysis helps a team anticipate how a process or design could fail, consider the effects of those failures, and prioritize prevention.
  2. At overview level, failure mode and effects analysis is used to assign blame after a failure has harmed a customer.
  3. At overview level, failure mode and effects analysis lists failures in the order they happened last year without considering their effects.
  4. At overview level, failure mode and effects analysis guarantees that every possible failure will be eliminated.

Correct: A. At overview level, failure mode and effects analysis helps a team anticipate how a process or design could fail, consider the effects of those failures, and prioritize prevention.

The method is prospective, looking ahead at possible failures and their consequences. Prioritizing the most important risks helps a Green Belt focus prevention where it matters most.

Control Phase · easy

2. Regarding green belt chart selection for subgroup averages and standard deviations, which statement is correct?

  1. For larger subgroups, or when subgroup size varies, the green belt pairs a chart of subgroup averages with a chart of subgroup standard deviations, which uses all the values in each subgroup.
  2. For larger subgroups, the green belt avoids charting spread at all, because the average becomes sufficient on its own.
  3. For larger subgroups, the green belt switches to a proportion defective chart even though the data are measurements.
  4. For larger subgroups, the green belt uses the range of the smallest subgroup as the spread for every subgroup regardless of size.

Correct: A. For larger subgroups, or when subgroup size varies, the green belt pairs a chart of subgroup averages with a chart of subgroup standard deviations, which uses all the values in each subgroup.

The standard deviation uses every value in the subgroup, so it estimates spread better for larger groups. It complements the averages chart in the same paired way.

Analyze Phase · easy

3. Regarding severity thinking when a green belt team rates a failure mode, which statement is correct?

  1. Severity thinking asks how serious the effect would be for the customer or the process if a failure mode occurred, judged by the harm of the effect rather than by how often it happens.
  2. Severity rises automatically whenever the team improves its ability to catch the failure.
  3. Severity is a rating of how likely the failure is to occur during a normal shift.
  4. Severity is decided by how easy the failure would be to fix after it occurs.

Correct: A. Severity thinking asks how serious the effect would be for the customer or the process if a failure mode occurred, judged by the harm of the effect rather than by how often it happens.

Keeping seriousness separate from likelihood and catchability stops a rare but harmful failure from being waved aside.

Measure Phase · easy

4. Regarding measurement stability checked against a reference over time, which statement is correct?

  1. Stability is the difference between two appraisers on the same day.
  2. Stability is whether a measurement system keeps the same behaviour over time when it measures the same reference or standard repeatedly.
  3. Stability means the process itself never changes.
  4. A measurement system proven stable once needs no further monitoring.

Correct: B. Stability is whether a measurement system keeps the same behaviour over time when it measures the same reference or standard repeatedly.

Periodic checks on a known reference catch drift before it contaminates project data.

Define Phase · easy

5. A study review turns to SIPOC as a high level process summary. Which statement should a candidate select?

  1. A SIPOC is a detailed work instruction that tells each operator exactly how to perform every task.
  2. A SIPOC replaces customer contact because the customers column can be filled from imagination.
  3. A SIPOC summarizes a process at a high level by naming its suppliers, inputs, process steps, outputs, and customers, giving the Define team a shared one page view of the work.
  4. A SIPOC lists only financial transactions and excludes the actual steps of the process.

Correct: C. A SIPOC summarizes a process at a high level by naming its suppliers, inputs, process steps, outputs, and customers, giving the Define team a shared one page view of the work.

The summary aligns the team on boundaries and key relationships before detail is added. It is a scoping tool, not a substitute for a detailed process map.

Define Phase · medium

6. A problem surfaces at a hospital system that involves matching a collection method to the question being asked. Which statement reflects the correct understanding?

  1. A Green Belt matches the collection method to the question, using broad methods for how widespread a view is and conversational methods for why customers hold that view.
  2. A Green Belt chooses a collection method by whichever tool is already open on the computer.
  3. A Green Belt uses a focus group to prove exactly what share of all customers holds a particular view.
  4. A Green Belt uses the same collection method for every question because consistency matters more than fit.

Correct: A. A Green Belt matches the collection method to the question, using broad methods for how widespread a view is and conversational methods for why customers hold that view.

Different questions need different kinds of evidence. Matching method to question prevents broad claims built on narrow conversations, and vice versa.

Improve Phase · medium

7. When a situation involving unnecessary transport as waste targeted in improvement needs resolving at a food-processing operation, which statement is correct?

  1. Transport waste is the needless movement of material or work between locations, adding handling and delay without changing the product for the better.
  2. Transport waste refers to employees commuting from home to the workplace.
  3. Transport waste means any delivery a customer has actually requested.
  4. Transport waste is eliminated by moving work between departments more often.

Correct: A. Transport waste is the needless movement of material or work between locations, adding handling and delay without changing the product for the better.

Every extra move is a chance for damage, loss, and delay. Layout and sequencing improvements often remove transport that nobody would choose on purpose.

Define Phase · medium

8. Examined closely, translating vague customer language into observable needs comes down to one correct statement. Which is it?

  1. Turning voice data into requirements means quoting customer slogans word for word as the final requirements.
  2. Turning voice data into requirements starts by translating vague customer words into observable needs, so a wish for fast service becomes a need the team can check in the process.
  3. Turning voice data into requirements means keeping needs deliberately vague so any result can claim to meet them.
  4. Turning voice data into requirements means replacing customer words with technical jargon customers would not recognize.

Correct: B. Turning voice data into requirements starts by translating vague customer words into observable needs, so a wish for fast service becomes a need the team can check in the process.

Observable needs can be verified in the delivered output. Translation preserves the customer intent while making it usable for project work.

Control Phase · medium

9. A champion at a food-processing operation asks why a step involving sharing lessons learned beyond the green belt project team matters. Which explanation is correct?

  1. Closure includes communicating the lessons and the proven countermeasures to teams running similar processes, so they can adopt what worked without repeating the same investigation.
  2. Lessons are shared as a warning that other processes are assumed to be failing in the same way as the project process.
  3. Lessons are shared only with teams that ask in writing, because unsolicited sharing is discouraged in improvement work.
  4. Lessons stay inside the department by rule, even when sister processes have the identical problem the project just solved.

Correct: A. Closure includes communicating the lessons and the proven countermeasures to teams running similar processes, so they can adopt what worked without repeating the same investigation.

Similar processes often share the same root causes. Passing on a proven fix spreads the benefit at almost no extra cost.

Define Phase · medium

10. A fellow Green Belt double-checking Lena’s work at an electronics assembly plant raises project selection using agreed criteria. Which statement settles it?

  1. Project selection improves when criteria are invented after a favorite project has already been chosen.
  2. Project selection improves when the loudest voice in the meeting chooses the project without comparing alternatives.
  3. Project selection improves when each reviewer uses private criteria that are never shared with the rest of the group.
  4. Project selection improves when the Green Belt and sponsor apply the same agreed criteria, such as customer impact, feasibility, and expected benefit, to every candidate being compared.

Correct: D. Project selection improves when the Green Belt and sponsor apply the same agreed criteria, such as customer impact, feasibility, and expected benefit, to every candidate being compared.

Shared criteria make comparisons fair and visible. They also let a smaller Green Belt project be judged on the same basis as larger proposals.

Control Phase · medium

11. A study review turns to elements of documented standard work for green belt control. Which statement should a candidate select?

  1. Documented standard work lists only the final output target, leaving steps, pace, and checks to individual preference.
  2. Documented standard work describes the task in general encouragement, with no sequence or checks that could be observed.
  3. Documented standard work states the steps in order, the time or pace expected, the standard work in process allowed, and the quality checks built into the task.
  4. Documented standard work records the fastest time ever achieved once, and requires every operator to match it every cycle.

Correct: C. Documented standard work states the steps in order, the time or pace expected, the standard work in process allowed, and the quality checks built into the task.

Those elements make the standard observable and coachable. A leader can verify the work as performed against the work as documented.

Analyze Phase · medium

12. Examined closely, how a green belt test decision follows from strength of evidence comes down to one correct statement. Which is it?

  1. A green belt test decision proves the no-difference claim true whenever the data are compatible with it.
  2. A green belt test decision follows from how incompatible the observed data are with the no-difference claim: strongly incompatible data justify moving away from that claim, while compatible data do not.
  3. A green belt test decision declares a difference whenever two sample averages are not exactly identical.
  4. A green belt test decision follows from which result the project sponsor would prefer to announce.

Correct: B. A green belt test decision follows from how incompatible the observed data are with the no-difference claim: strongly incompatible data justify moving away from that claim, while compatible data do not.

The decision weighs evidence against a stated claim; it never amounts to absolute proof in either direction.

Measure Phase · hard

13. While preparing for a management review at an electronics assembly plant, Ingrid reviews repeatability as same appraiser same item measurement variation. Which statement applies?

  1. Repeatability is the difference between the averages of two different appraisers.
  2. Repeatability is the variation seen when the same appraiser measures the same item repeatedly with the same device under the same conditions.
  3. Repeatability describes how a device reading drifts over many months.
  4. Repeatability is the gap between a reading and the true reference value.

Correct: B. Repeatability is the variation seen when the same appraiser measures the same item repeatedly with the same device under the same conditions.

Short-term, same-everything repetition isolates the basic consistency of the device and method.

Overview: Six Sigma and the Organization · hard

14. During a management review at a manufacturing plant, a decision turns on how lean speed and six sigma quality complement each other at overview level. Which statement is correct?

  1. Lean speed and Six Sigma quality complement each other only when defects are passed downstream more quickly.
  2. Lean speed and Six Sigma quality complement each other because removing waste shortens a process while reducing variation makes the shortened process dependable.
  3. Lean speed and Six Sigma quality complement each other because faster work removes the need to check requirements.
  4. Lean speed and Six Sigma quality complement each other because variation increases when waste is removed.

Correct: B. Lean speed and Six Sigma quality complement each other because removing waste shortens a process while reducing variation makes the shortened process dependable.

A process can be quick but unreliable, or reliable but slow and wasteful. Combining the two emphases aims for a process that flows well and produces good results consistently.

Improve Phase · hard

15. Paul, a Green Belt at a manufacturing plant, is handling a problem involving failure mode thinking on the future process at Improve. Which statement should guide the work?

  1. Failure mode thinking on the future process means listing failures of competing products in the marketplace.
  2. Failure mode thinking on the future process is postponed until after customers report problems with the new design.
  3. At the Improve stage, failure mode thinking examines the proposed new process, asking how each step of the future design could fail and what the effect would be, so safeguards can be built in before rollout.
  4. At the Improve stage, failure mode thinking re-scores the old process exactly as it was analyzed before, with no reference to the new design.

Correct: C. At the Improve stage, failure mode thinking examines the proposed new process, asking how each step of the future design could fail and what the effect would be, so safeguards can be built in before rollout.

Applying failure mode thinking to the design, rather than only to the old process, catches weaknesses while they are still cheap to fix. Safeguards become part of the solution instead of repairs added later.

Analyze Phase · hard

16. A fellow Green Belt double-checking Grace’s work at an automotive supplier raises residuals as leftover gaps after fitting a project line. Which statement settles it?

  1. Residuals measure how satisfied customers are with the process output.
  2. Residuals are errors the team should rewrite so the line fits perfectly.
  3. Residuals are the leftover gaps between each observed outcome and the value the fitted line predicts for that input, and they show what the line has failed to explain.
  4. Residuals are the input values the team chose not to collect during the study.

Correct: C. Residuals are the leftover gaps between each observed outcome and the value the fitted line predicts for that input, and they show what the line has failed to explain.

What remains unexplained is diagnostic: its size and pattern reveal whether the line is an adequate summary.

Measure Phase · hard

17. During a steering committee session at a service operations centre, a decision turns on simple random sampling in green belt data collection. Which statement is correct?

  1. In simple random sampling, every item in the defined group has an equal chance of being selected, which protects the sample from collector preference.
  2. Simple random sampling means the collector picks items that look typical.
  3. Simple random sampling lets experienced staff hand-pick a balanced-looking set.
  4. Simple random sampling selects every item in the order it happens to arrive.

Correct: A. In simple random sampling, every item in the defined group has an equal chance of being selected, which protects the sample from collector preference.

Equal selection chance removes systematic favouring of convenient or attractive items.

Analyze Phase · stretch

18. Something has gone wrong during a project selection workshop at a financial services back office, and reading a steady drift in time-ordered project data is at the centre of it. Which statement points the right way?

  1. A steady drift in results plotted in time order suggests to a green belt that some condition is gradually changing, such as wear, fatigue, or a slowly shifting input.
  2. A steady drift in time-ordered data proves the process has settled and needs no attention.
  3. A steady drift in time-ordered data can only be caused by mistakes in recording the results.
  4. A steady drift in time-ordered data means every individual result is identical to the one before it.

Correct: A. A steady drift in results plotted in time order suggests to a green belt that some condition is gradually changing, such as wear, fatigue, or a slowly shifting input.

The direction and pace of a drift point the team toward gradual causes rather than sudden events.

Measure Phase · stretch

19. Something has gone wrong during a Black Belt mentoring session at a hospital system, and ratio scale meaning for green belt measurement data is at the centre of it. Which statement points the right way?

  1. On a ratio scale, zero means the value was not recorded rather than truly absent.
  2. Ratio scale data are ranked categories whose gaps are unknown.
  3. Ratio scale data have equal spacing and a true zero, so both differences and ratios between values are meaningful, as with elapsed time or weight.
  4. Ratio scale data lack a true zero, like temperature on a relative scale.

Correct: C. Ratio scale data have equal spacing and a true zero, so both differences and ratios between values are meaningful, as with elapsed time or weight.

A genuine zero point is what allows a Green Belt to say one duration is truly twice another.

Improve Phase · stretch

20. Lena works as a Six Sigma Green Belt at a manufacturing plant and must apply the principles of unnecessary motion as waste targeted in improvement. Which statement gives the correct guidance?

  1. Motion waste is movement by people that adds no value, such as reaching, searching, walking, or bending caused by a poorly arranged workplace.
  2. Motion waste refers to products traveling on a conveyor between processes.
  3. Motion waste is cured by asking people to move faster within the same layout.
  4. Motion waste means the purposeful hand movements that assemble a product.

Correct: A. Motion waste is movement by people that adds no value, such as reaching, searching, walking, or bending caused by a poorly arranged workplace.

People should not have to hunt, stretch, or wander to do their work. Arranging tools and materials close at hand removes motion that tires workers and steals time.

These 20 are the program’s free sample. The worked companion page carries 24 further worked CSSGB practice questions.