CCO Anchor/Micropile Drill Rig Operator (AMP) – Practice Exams

Current Status

Not Enrolled

Price

About This Program

This program prepares candidates for the written examinations of the CCO Anchor/Micropile Drill Rig Operator (AMP) certification, issued by CCO (the National Commission for the Certification of Crane Operators) and developed jointly with the International Association of Foundation Drilling (ADSC). The written examinations are a Core examination of 90 multiple-choice questions in 90 minutes plus an Anchor/Micropile Drill Rig Specialty examination of 45 questions in 45 minutes — 135 written questions across the two sittings, with a calculator permitted. CCO does not publish a percentage passing standard for these written examinations, and this program states none. Certification also requires a CCO practical examination on an anchor/micropile drill rig; this program prepares for the written examinations only and does not cover the practical examination. The AMP designation covers operators of anchor/micropile drill rigs — compact rigs drilling small-diameter holes for ground anchors, tiebacks, and micropiles used in excavation support, slope stabilization, underpinning, and foundation strengthening. It is a different designation from the CCO Foundation Drill Rig Operator (FDR) designation, which covers large-diameter drilled shafts, and from every other CCO designation. This product is examination preparation only; PassProfessor is independent and is not affiliated with CCO or ADSC.

What Is Covered

  • A. Pre-Operations & Site Conditions (342 questions): pre-work anchor layout and jobsite assessments, existing structures and foundation depths, ground conditions and compact-rig stability, utility location and safe distances, power line hazards, work platforms and limited access, and job hazard analysis for anchor and micropile work.
  • B. Operations (492 questions): loading, staging and assembly of AMP rigs, traveling the compact rig, safe setup and aligning on the anchor location, drilling anchors and micropiles, grouting and tremie placement, installing tendons, casing advancement and withdrawal, safety devices, inspections, adjusting to changing conditions, emergency procedures and stop authority, and shutdown and securing.
  • C. Technical Knowledge (456 questions): AMP rig specifications and capacity and stability charts, anchor and micropile types, hollow-bar and bond-length terminology, grout mixes and quality checks, tendons and corrosion protection, rigging principles, wire rope and line pull, inspections and basic maintenance, gauges and operational aids.
  • D. Tooling (60 questions): tool inspection, tool installation verification, and rotary tools, drifters, hollow bars and attachments for anchors and micropiles.
  • E. Communications (150 questions): industry hand signals for AMP rigs, equipment signage and pictograms, crew communication and grout plant coordination, and signaling during drilling, travel and steel handling.

How It Works

The bank contains 1,500 original practice questions written to the knowledge areas in the CCO Drill Rig Operator Candidate Handbook (DRO CH REV 01/25), each with a full explanation. Practice questions are original items; they are not CCO exam questions. A full-length simulated exam mirrors the combined written form at 135 questions in 135 minutes, drawn at the published domain weights. The practice simulation is scored against a 70% PassProfessor practice benchmark — a study target only, not a CCO passing standard, because CCO publishes no percentage passing standard for these written examinations. Eligibility note: CCO requires candidates to be at least 18, comply with the CCO Substance Abuse Policy, and agree to the CCO Code of Ethics; the written and practical elements must be passed within 12 months of each other, and certification runs five years.

Full access: $49 for 6 months. Start with the free 20-question sample.