South Carolina licenses its Residential Specialty Contractor — HVAC under Title 40, Chapter 59 through the Residential Builders Commission. The licensee is an individual, licensed by examination after applying to the state first: an 80-question technical examination in 240 minutes passing at 52 correct, and a Residential Business and Law examination passing at 34 correct, each figure carrying the bulletin’s own caveat that the passing score may change. The scope is capped at five tons cooling and 175,000 BTU/HR heating per unit, for undertakings exceeding $500. This guide works through the credential, the route, and the examinations in full. Its companion program page is the South Carolina Residential Specialty Contractor — HVAC program page at /south-carolina-residential-specialty-contractor-hvac-exam-prep/.
This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.
The credential at a glance
| Item | Verified position |
|---|---|
| Program | South Carolina Residential Specialty Contractor — HVAC: the Residential HVAC technical examination, with the Residential Business and Law examination stated as structure |
| Regulator | Residential Builders Commission (RBC), within the Department of Labor, Licensing and Regulation (LLR) |
| Governing law | S.C. Code Title 40, Chapter 59, Article 1; regulations at S.C. Code Regs. Chapter 106, scope at 106-1(c) |
| Licensee | An individual; fee-table line: Residential Specialty Heating and Air License (RBH) |
| Specialty threshold | Undertakings exceeding $500 |
| Equipment cap | Five tons cooling and 175,000 BTU/HR heating per unit |
| Technical examination | 80 questions, 240 minutes, open book; 52 correct to pass (65 percent), with the bulletin’s “may change” caveat |
| Business and Law examination | 50 questions, 120 minutes; 34 correct to pass (68 percent), with the same caveat; stated as structure in this guide |
| Administrator note | PassProfessor is independent and is not affiliated with the South Carolina Residential Builders Commission |
The Chapter 59 frame: specialty licensure for individuals
The Residential Builders Commission is the exclusive licensing and registration entity for persons engaged solely in residential building or residential specialty contracting. That word “solely” does real work: Chapter 59 is the regime for the residential-only practitioner, and a contractor whose work runs under Chapter 11 stands outside it, as the closing section of this guide states.
A “residential specialty contractor” is an independent contractor not regulated by Chapter 11 who contracts with a licensed residential builder, a general contractor, or an individual property owner for work requiring special skills in the specialized trades, for undertakings exceeding $500. The definitional sections sit at section 40-59-20(6) and (7), licensure and bond at section 40-59-220, renewal at section 40-59-230, specialty limits at section 40-59-240, and credit and judgments at section 40-59-250. Within the specialty areas the statute lists, three trades are licensed by examination — plumbers, electricians, and heating and air conditioning installers and repairers — and the remaining listed trades receive registrations. Heating and air conditioning has been one of the examined three since July 1, 2004. A specialty contractor is not authorized to construct additions without supervision by a residential builder or other appropriately licensed person or entity, may not perform work outside its scope including by hiring or subcontracting others to do it, and may hold no more than three classifications on a registration or specialty certificate; a person wanting more than three must be examined and licensed as a residential builder. Specialty contractors remain subject to county and municipal business license ordinances, and a locality may require its own examination — but if the specialty contractor has passed a Commission-approved examination in their area, no additional local examination may be required.
The scope, in its regulatory words
The Commission’s regulatory scope for heating and air conditioning installers and repairers, at Reg. 106-1(c), covers installation, replacement, alteration, or repair of air conditioning equipment and systems limited to five tons cooling and 175,000 BTU/HR heating per unit, including package equipment and heating and cooling systems, and the installation, alteration, and repair of ventilation systems including duct work, air filtering devices, water treatment devices, pneumatic or electrical controls or control piping, thermal and acoustical insulation, vibration isolation materials and devices, liquid fuel piping and tanks — except those used for liquid propane gas — water and gas piping, and air handling systems, including gas-fired furnaces and space heaters and factory-assembled single-package units and split-type direct-expansion equipment including heat pumps.
Two features of that text decide real cases. The cap is per unit: five tons and 175,000 BTU/HR attach to each unit, and a system built of compliant units is a different question from a single unit above the cap. And the liquid fuel line carries its own exception — tanks used for liquid propane gas are outside it — which is why the examination’s fuel topics separate LP gas, natural gas, and fuel oil as distinct subjects rather than treating fuel as one topic. Candidates should read the scope the way an inspector reads it: as a grant with edges.
The route, step by step
Step one — build the packet. All applicants for residential licensure must submit to a credit report. Builder and specialty applicants must list outstanding judgments — their own and associated entities’, for the past 5 years — on the application and at renewal. The licensure packet includes a notarized application, a copy of photo identification and a Social Security card, a notarized Verification of Lawful Presence, W-2 or 1099 copies from the affidavit employer, experience documentation, and verification of licensure from other states.
Step two — prove one year of supervised experience. Licensure by examination requires passing the PSI examination and 1 year of verifiable experience under the supervision of a licensed individual in the trade applied for, on the Commission’s licensure page. The Commission’s HVAC Contractor Instructions specify that the experience must be shown under the builder, electrician, or general contractor who signs the experience affidavit, and an Affidavit of Experience form is mailed to the listed employer or supervisor — the Commission verifies with the supervisor directly.
Step three — apply to the state and receive the eligibility letter. Unlike the commercial examinations, a residential candidate must apply to the state first. The Commission’s eligibility letter is valid for 1 year and allows 3 examination attempts in 12 months.
Step four — sit both examinations. The technical examination and the Business Management and Law examination for Residential Builders, each at its published standard below, through PSI under the Candidate Information Bulletin for South Carolina Residential Builders Commission — Residential Builders and Residential Specialty Examinations, updated November 1, 2026.
Step five — complete licensure. After passing, the applicant submits test results, the license fee, and the surety bond — original copy, signed, with power of attorney — if work will exceed $5,000, on the mechanics stated in the bond section below. A residential applicant who fails the examination 3 times must wait 12 months from the last attempt before re-examination, under section 40-59-220(E), with re-examination on payment of an additional examination fee.
The technical examination in detail
The Residential HVAC technical examination is 80 questions in 240 minutes, expressly open book. Its published scope is residential HVAC work including A/C and heat pump equipment, LP and natural gas including piping, fuel oil appliances and piping, ductwork, and other associated trades. The bulletin likewise provides 1 to 10 unscored pretest items, approximately 10 percent, that count against time; cancellation or rescheduling 2 days before the appointment avoids forfeiting the fee; arrival is 30 minutes early with one form of signature-bearing photo identification; and a silent non-printing non-programmable calculator is expressly permitted. Scored and pretest counts are never merged into one fixed presented total in this guide.
The passing standard is published as 52 correct to pass, 65 percent, of 80. The bulletin appends a caveat to its passing-score lines — the HVAC, Business and Law, Builder, Plumbing, and Electrical lines alike — in these terms: this passing score may change as examination performance is evaluated. The figure in this guide is therefore a dated figure: the value in the bulletin updated November 1, 2026, printed with its caveat, and candidates preparing against a later bulletin should confirm the line in that bulletin rather than assume this figure travels forward unchanged.
The outline sums to 80 and has a unmistakable residential shape. Ducts carries 14 — nearly a fifth of the sitting, and the single largest topic in either South Carolina HVAC examination this catalog covers. Heating and Cooling Principles carries 6; Load Calculations 6; A/C and Heat Pump Equipment 6. Furnaces and Heaters, Fuel Gas, and Piping carry 5 each. Refrigerants, Controls, and LP Gas carry 4 each. Insulation, Hangers and Supports, Chimneys, Flues and Vents, Combustion Air, and Ventilation and Exhausts carry 3 each. Safety carries 2 and Fuel Oil carries 2. Testing, Adjusting and Balancing and Sound, Vibration and Seismic Control carry 1 each. A preparation plan for this sitting is therefore a duct plan first, a principles-and-load plan second, and a three-fuel plan throughout — natural gas inside Fuel Gas, LP gas as its own topic, and fuel oil with its own appliances, piping, and reference text.
The Residential Business and Law examination, as structure only
The second required examination is Business Management and Law for Residential Builders: 50 questions in 120 minutes, expressly open book. Its passing standard is published as 34 correct to pass, 68 percent, of 50, carrying the same bulletin caveat — this passing score may change as examination performance is evaluated — and printed in this guide with that caveat and its November 1, 2026 bulletin layer attached. Its reference is the NASCLA Contractors Guide to Business, Law and Project Management — South Carolina Residential Builders, 8th Edition or 9th Edition, with the bulletin note stated in substance: effective October 9, 2026 the exam is based on the 8th or 9th edition, and effective April 9, 2027 the exam will only be based on the 9th edition. An undated statement that the examination rests on the 8th or 9th edition becomes stale on April 9, 2027, and candidates sitting after that date carry the 9th Edition only. This guide states the Business and Law examination as structure — its place in the route, its mechanics, its standard, and its reference — and builds no content for it. No fee for this examination for this candidate is stated in the sources behind this guide, and no fee for it is printed here, in either file of this package.
References and the edition window
The tested references for the Residential HVAC examination are: Manual J (ACCA), cited by ISBN 1892765012 as printed in the bulletin, with no edition statement — the bulletin supplies no edition, and this guide supplies none; material that assigns this examination a Manual J edition borrowed from another South Carolina list has imported it, and candidates should not follow it there. The International Mechanical Code, the International Residential Code, and the International Fuel Gas Code, on the window below. The ACCA Ductulator. 29 CFR 1926 OSHA, latest edition or PSI Selections. Modern Refrigeration and Air Conditioning, 19th or 20th edition — this examination’s own editions, verified against the commercial lists’ different editions and not an error to be harmonized in either direction. HVAC Duct Construction Standards, Metal and Flexible, 3rd Edition, 2005 (SMACNA) — a fitting reference for a sitting whose largest topic is ducts. And Residential Oil Burners, 3rd Edition, 2007, standing behind the fuel oil topic. No National Electrical Code title appears on this list, and no Manual D, Manual N, or Manual S appears on it; the absence of the load and duct design manuals that anchor other states’ lists is itself a fact about how this sitting is built — Manual J is present by ISBN, and the design-manual family otherwise is not.
The edition window is printed for every code reference on the residential list in the same form as the commercial bulletin: beginning November 1, 2026, either the 2024 code with South Carolina modifications (or the 2024 South Carolina code) or the 2021 equivalent may be used; after July 1, 2027, only the 2024 editions may be used. The flip is therefore not a residential-only phasing; the same window and the same July 1, 2027 hard flip appear in both South Carolina bulletins. A provision that differs between the 2021 and 2024 editions is edition-dependent throughout the window, and sound preparation pins the edition before arguing the answer.
The adopted layer, including its residential detail
The enforcement layer is identical in structure to the commercial side and is kept separate here as its own layer. The 2021 South Carolina codes — the 2021 I-codes with South Carolina modifications, with the 2020 NEC — are in force through December 31, 2026, adopted October 6, 2021 and implemented January 1, 2023. The 2024 South Carolina codes — the 2024 IBC, IRC, IFC, IPC, IMC, and IFGC with modifications, plus the 2023 NEC with modifications — were adopted August 26, 2025 with a local-jurisdiction implementation date of January 1, 2027. The 2009 IECC remains the mandatory energy standard by statute. The enforcement flip, January 1, 2027, and the examination-reference window, November 1, 2026 through July 1, 2027, are different instruments and must never be conflated.
Two residential-specific adopted-layer modifications are recorded in the sources and belong in this guide as adopted-layer facts, not as tested-edition claims. In the 2024 South Carolina Residential Code, section M1411.15 on locking access port caps is deleted without substitution, so access ports are not required to have locking tamper-resistant caps in the South Carolina Residential Code. And section G2415.17.1 imports plastic-piping limits from the fuel-gas chapter: outdoors underground only, with caps of 100 psig for natural gas and 30 psig for LP-gas. Both are stated here as field-layer facts about the adopted 2024 residential code; what the examination keys inside its window is governed by the window section above.
Fees, the bond, and the firm certificate, in their layers
The vendor layer is one line: the Residential HVAC examination fee is $78. It is a single fee line in the bulletin fee schedule; the HVAC examination has no “both portions” price there, unlike sibling residential examinations that print one-portion and both-portion figures, and this guide constructs no combined price. No separate Residential Business and Law fee line for this candidate is stated in the sources — that fee is not in sources, and it appears nowhere in this package.
The board layer is the Commission’s fee table for the Residential Specialty Heating and Air License (RBH): application $100; license $220; renewal $220; renewal late fee $50; reinstatement $480. Contrasts in the same table are recorded here only to keep the table whole and are not RBH costs: the builder, electrical, and plumbing lines carry a $135 application with the same $220 license and renewal figures, and the registration line carries a $100 fee and renewal, a $20 late fee, and a $290 reinstatement.
The bond layer is not a fee. A licensed residential specialty contractor must obtain an executed surety bond when the cost of an undertaking for an individual property owner exceeds $5,000, in an amount approved by the Commission, with the signed original furnished to the Commission; Reg. 106-2 fixes the amount as not less than $10,000. Four dollar figures in the residential system must never be substituted for each other: the $500 specialty threshold, the $5,000 residential builder threshold, the $5,000 specialty bond trigger, and the bond floors themselves. The residential builder bond is not less than $15,000 and belongs to a different credential; the specialty bond floor here is $10,000.
The firm layer is separate again. A firm may practice residential building or specialty contracting only through an entity holding a residential business certificate of authorization, except that no certificate is required for an individual practicing in their own name as an individually licensed person, or an individual with at least 51 percent ownership of the firm who is the firm’s sole resident licensee. Firm authorization requires a designated resident licensee in responsible charge of each principal and branch office, and an executed surety bond of $15,000 — the firm bond, distinct from the individual specialty bond above. The certificate carries a $100 fee and a $100 renewal on the Commission’s licensure page. The individual license or registration itself may not be held by the firm.
Renewal, lapse, and continuing education
Residential HVAC licenses renew June 30 every odd year — 2025, 2027, 2029, and so on — under the Commission’s HVAC Contractor Instructions. The Commission renews on a completed renewal application with proof of financial responsibility or bond and payment of fees. A license inactive for more than 3 years may not be renewed; the holder must file a fresh application and pass the examination. LLR’s reinstatement mechanics run on the same scale: a lapse of 12 months to 3 years is handled by reinstatement application, and a lapse of 3 years or more requires reapplication and passing the examination. A Chapter 59 licensee must notify the Commission in writing within 30 days of a change in required on-file information, including mailing address.
One discipline governs every cycle statement in this guide: the Commission’s renewal cycles are not uniform across its license types. The statute speaks of a Commission-established period, and the Commission’s pages run different cycles for different credentials. The June 30 odd-year cycle in this section is the Residential HVAC cycle, stated for this license only; no statement here generalizes it to the residential builder, home inspector, or certificate lines, and candidates should not import another credential’s cycle onto this license in either direction.
On continuing education, the statutory authority is permissive, not self-executing: the Commission may require continuing education as a condition of renewal, but only as imposed by regulation, at section 40-59-230(B). No continuing-education requirement for specialty licensees appears in S.C. Code Regs. Chapter 106, sections 106-1 through 106-5, as retrieved for the sources behind this guide. That is the whole verified position, and this guide states no hours figure in either direction.
Waiver routes
The Commission has residential HVAC examination-waiver agreements for the technical portion only with Alabama, North Carolina, and Mississippi; the South Carolina Business Management and Law examination is still required under them. The Residential HVAC license may also be obtained without the technical examination by an applicant who is a current South Carolina Commercial Mechanical Contractor in the HVAC field, or who holds a Masters License issued by examination from the Municipal Association of South Carolina. The business management and law examination is still required in every waiver case. The pattern is consistent: South Carolina waives evidence of technical competence it can verify from another examination, and waives its own law examination for no one on this route.
The commercial line, drawn once and kept
Chapter 59 does not apply to a Chapter 11 licensee’s construction work, and a mechanical contractor licensed under Chapter 11 is exempt from the Chapter 59 specialty provisions when contracting in the classification in which it is licensed under Chapter 11. Conversely, this specialty license is the Chapter 59 credential for persons engaged solely in residential specialty contracting. The two lines, stated once and never merged: the commercial Air Conditioning credential is an entity license, keyed to a $10,000 license threshold, with no per-unit tonnage cap in its subclassification text, and it includes Packaged Equipment and Refrigeration work. This residential specialty credential is an individual license, keyed to a $500 specialty threshold, capped at five tons cooling and 175,000 BTU/HR heating per unit. For context only, a residential builder — a different credential again — constructs or superintends residential buildings not over three floors with not more than sixteen units, where cost exceeds $5,000. A candidate who keeps those three credentials in three separate columns will not be confused by material that mixes them.
How the PassProfessor program approaches this examination
The program page for this credential is the South Carolina Residential Specialty Contractor — HVAC program page at /south-carolina-residential-specialty-contractor-hvac-exam-prep/. The program prepares the technical examination at its published outline — ducts first, at their full weight — pins code material to its edition inside the dual-edition window, and covers the capped scope, the state-first route, and the bond and firm layers as part of the credential. Material is written from scratch against the South Carolina residential sources. PassProfessor is an independent preparation provider, not affiliated with the South Carolina Residential Builders Commission, LLR, or PSI, and completing the program confers no license, no exemption, and no standing with the Commission.
Tell me when enrollment opens. The South Carolina Residential Specialty Contractor — HVAC program is in the works and enrollment is not yet open. Leave an email address and PassProfessor will write to you when the program is ready — and only about this program.
Frequently asked questions
Why must I apply to the state before scheduling?
Because the residential route is state-first. The Commission issues an eligibility letter valid for 1 year allowing 3 attempts in 12 months; PSI scheduling follows that letter.
What score passes, exactly as published?
Technical: 52 correct of 80, 65 percent. Business and Law: 34 correct of 50, 68 percent. Both are the values in the bulletin updated November 1, 2026, and the bulletin appends that the passing score may change as examination performance is evaluated.
What happens after three failed attempts?
A wait of 12 months from the last attempt before re-examination, under section 40-59-220(E), with re-examination on payment of an additional examination fee.
Which Manual J edition does the examination use?
The bulletin cites Manual J by ISBN 1892765012 with no edition statement, and this guide states no edition. Editions printed on other South Carolina lists belong to those examinations.
Why are the Modern Refrigeration editions different from the commercial list?
Because the two bulletins print them differently, and the difference is verified rather than an error: 19th or 20th edition here, against the commercial list’s editions for its own examinations. Neither list is corrected to match the other.
What experience must I show, and how is it verified?
One year of verifiable experience under the supervision of a licensed individual in the trade, shown under the builder, electrician, or general contractor who signs the experience affidavit; the affidavit form is mailed to that employer or supervisor.
What does the examination cost?
PSI charges $78 for the Residential HVAC examination, as a single fee line with no both-portions price. No Business and Law fee for this candidate is in this guide’s sources, and none is printed.
Which bond is mine — $10,000 or $15,000?
The individual specialty bond: not less than $10,000 under Reg. 106-2, required when an undertaking for an individual property owner exceeds $5,000. The $15,000 figures belong to the residential builder bond and to a firm certificate of authorization — different instruments.
When does the license renew?
June 30 every odd year, for the Residential HVAC license. The Commission’s cycles are not uniform across license types, and this guide states no other credential’s cycle as this one’s.
Can the Business and Law examination be waived?
No. Under every technical-portion waiver route in this guide — the Alabama, North Carolina, and Mississippi agreements, the current commercial mechanical contractor route, and the Municipal Association of South Carolina Masters License route — the South Carolina Business Management and Law examination is still required.
Is PassProfessor affiliated with the Residential Builders Commission?
No. PassProfessor is an independent preparation provider. The Commission alone licenses residential specialty contractors in South Carolina.
When does enrollment open?
The program is in the works and enrollment is not yet open. Leave an email address on this page and PassProfessor will write to you when the program is ready — and only about this program.
