Louisiana’s HVACR credential is a subclassification of Mechanical Work, licensed by the State Licensing Board for Contractors under R.S. 37:2150 et seq. The subclass examination — Heat, Air Conditioning, Ventilation, Duct Work, and Refrigeration — is administered by PSI: 50 questions in 130 minutes, open book, passed at 35 correct of 50, keyed to the 2021 mechanical and fuel gas codes, while the full Mechanical Work examination keys to the 2018 codes. This guide works through the split, the outline, and the qualifying party system in full.
This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.
The credential at a glance
| Item | Verified position |
|---|---|
| Program | Louisiana Mechanical Work — HVACR Subclass: the subclass examination officially named Heat, Air Conditioning, Ventilation, Duct Work, and Refrigeration |
| Regulator | State Licensing Board for Contractors (LSLBC), Baton Rouge, under R.S. 37:2150 et seq. |
| Classification position | Mechanical is a major classification; the HVACR subclass is Item 23 at LAC 46:XXIX.301, and the full Mechanical major is Item 38 |
| Examination vendor | PSI, following the transition of all Board trade examinations to PSI effective August 5, 2025 |
| Examination format | 50 questions; 130 minutes; open book; Board eligibility approval before scheduling |
| Passing standard | 35 correct of 50 (70%) to pass, in the outline’s published form |
| Tested references | International Mechanical Code, 2021; International Fuel Gas Code, 2021; and the trade references detailed in this guide |
| Field code | 2021 international codes with Louisiana amendments from January 1, 2023; 2024 editions adopted for January 1, 2027 |
| Credential term | Anniversary expiry; elected one-, two-, or three-year renewal; no continuing education duty for this licensee |
| Administrator note | PassProfessor is independent and is not affiliated with the State Licensing Board for Contractors or with PSI |
This guide is the companion to the Louisiana Mechanical Work — HVACR Subclass program page at /louisiana-mechanical-work-hvacr-subclass-exam-prep/. The program page states the position briefly; this guide states it in full, organised around the three things a Louisiana candidate most needs to hold apart: the subclass from its major, the subclass examination’s code generation from the full examination’s, and the present field code from the dated future one.
The classification architecture: major, subclass, and the one-way door
Louisiana licenses contractors by classification, and position inside that architecture determines both scope and examination. Mechanical is one of the eleven major classifications named in the statute. Beneath and beside the majors sit subclassifications and specialty classifications, listed in the Board’s rule at LAC 46:XXIX.301. The HVACR subclass — Item 23 in that list — is defined by a single sentence of scope: the installation, maintenance or repair of air conditioning, ventilation, refrigeration, coolers, freezers, and ice rinks, with a license required when the value exceeds $10,000, as a subclassification of Mechanical. The full Mechanical classification — Item 38 — carries the wide scope: hydraulic and pneumatic systems including heating, ventilation, air conditioning, refrigeration, hydronic and steam systems, pressure vessels, plumbing, gas piping, process piping, mechanical equipment, air and process heaters and seals, and air vacuums and filters, at the same $10,000 threshold. The statute’s own definition of mechanical contracting adds plumbing, boilers and other pressure vessels, steam and hot water systems and piping, gas piping and fuel storage, chilled water and condensing water systems and piping, and industrial process piping.
Authorisation flows downhill only. A license in a major classification authorises any subclassification scope under it, with a stated exception for Residential Construction that does not affect this family: the full Mechanical licensee needs no separate HVACR subclass license to do subclass work. The subclass licensee, holding only Item 23, holds only Item 23’s scope, and work in the wider Mechanical scope without the major license is work without the proper classification — itself a discipline ground. Two threshold mechanics govern the boundary in practice. A mechanical contractor undertakes mechanical contracting at a project value of $10,000 or more, where project value is the entire cost including labor, materials, rentals, and all direct and indirect expenditures regardless of who pays, including donated labor and materials. Dividing a contract to stay beneath a threshold is disregarded; the parts are treated as one contract. And inside the major’s scope sits a second board’s territory: plumbing work over $10,000 performed by a mechanical contractor requires a master plumber license from the State Plumbing Board of Louisiana, and plumbing also appears as its own subclassification of Mechanical. The license, once issued, belongs to the licensee and is not transferable, whoever serves as qualifying party — a rule whose qualifying party consequences the next sections develop.
The edition split, stated in full
This is the fact the whole package turns on, and it is stated here without abbreviation. The HVACR subclass examination keys to the International Mechanical Code, 2021 edition, and the International Fuel Gas Code, 2021 edition. The full Mechanical Work examination keys to the International Mechanical Code, 2018 edition, the International Fuel Gas Code, 2018 edition, and the International Plumbing Code, 2018 edition. The broader examination is keyed to the older generation on every code it shares with the subclass, and it adds a third code, the plumbing code, that the subclass does not list at all. Every preparation decision follows from holding the two lists apart. Subclass code study is 2021 study. Subclass reference shelves hold the subclass list. Material built for the full examination — its code editions, its plumbing domains, its wider reference shelf — is material for a different sitting, however similar the trade vocabulary sounds.
The field layer currently sits with the subclass. Louisiana’s enforceable codes are the 2021 international codes with Louisiana amendments — building, existing building, residential, mechanical, plumbing, fuel gas, and energy codes in their 2021 editions, with the 2020 electrical code — effective January 1, 2023. The subclass candidate therefore studies, for the room, the same code generation the licensee enforces in the field, with the standing caution that field codes carry Louisiana amendments while the examination keys to the listed editions. The full-examination candidate faces the opposite position: a sitting keyed a full generation behind the field. Candidates comparing notes across the two sittings should expect their code answers to differ, correctly, in both directions.
The future layer is dated and sourced, and its limits matter as much as its date. Effective January 1, 2027, Louisiana’s construction code adopts the 2024 editions — mechanical at its stated section, fuel gas at its stated section, and the companion codes alongside them, each with Louisiana amendments, with the 2023 electrical code. Governance of that code passed, by a 2026 act effective August 1, 2026, to a renamed commission under a renumbered statutory home; the adoption and its date stand in the adopted text. What does not stand anywhere in the sources for this guide is any vendor announcement re-keying either examination to the 2024 codes. The consequence, stated as the sources leave it, is that on and after January 1, 2027 the enforceable field code will be one edition newer than the subclass examination’s keyed editions and two editions newer than the full examination’s, unless the vendor re-keys — which it has not announced. This guide therefore makes no re-key claim in either direction, prints the 2024 codes as a field fact only, and keys every examination statement to the editions the current outlines list.
The subclass examination in full
The subclass sitting is a PSI computer-administered, open-book examination of 50 questions in 130 minutes, passed at 35 correct of 50 — 70 percent — in the outline’s published form, at a vendor examination fee of $140. Its outline divides the 50 questions into eight blocks: Electrical Knowledge, Motors, and Controls, 7; Piping — Refrigeration, Hydronic, Steam, Process, 7; Heating and Cooling Principles, Theory, and Equipment, 8; Refrigerants and Refrigeration, 8; Fuel and LP Gas, 5; Combustion Air, Chimneys, Flues and Vents, 5; Ducts, Ventilation and Exhaust, 5; and Load Calculations, 5. The reference list that serves those blocks is: the International Mechanical Code, 2021; the International Fuel Gas Code, 2021; Manual J — Residential Load Calculation, in its reprinted form as listed; Modern Refrigeration and Air Conditioning, 20th or 21st edition; HVAC Duct Construction Standards, Metal and Flexible, 2005, third edition; and Ugly’s Electrical References, 2014, 2017, or 2020 edition. No plumbing code, no additional load manual beyond the listed Manual J, and no safety-code volume appears on the subclass list, and none belongs in subclass preparation.
The full examination, recorded here strictly as contrast, is a sitting of twice the size: 100 questions in 240 minutes, open book, passed at 70 correct, at the same vendor fee, on the 2018 code editions and a wider shelf that includes a commercial load manual, a duct design manual with its slide rule, a safety volume, a sprinklers standard, and a pipefitters handbook, with its largest blocks in gas systems and isometric analysis and a substantial plumbing contingent across fixtures, water supply, drainage, and related areas. A candidate who has seen only the full examination’s description will over-prepare plumbing, under-prepare the subclass’s balanced eight blocks, and study every shared code a generation behind. The two outlines share a trade; they do not share a sitting.
Administration follows the vendor’s Louisiana rules for both sittings. The candidate arrives at least 15 minutes before the appointment and presents one valid, unexpired, signature- and photo-bearing identification. Calculators are limited to the non-programmable, silent, battery-operated kind without a paper tape or alpha keyboard — scientific calculators are not permitted — and a duct calculator of any brand is allowed. The tutorial, of up to 15 minutes, does not count against examination time. The score displays on screen at the end, an official report follows by email, and a failing report carries diagnostics. Cancellation without forfeiting the fee requires notice at least two days before the appointment, by an acceptable method — voicemail and email are not acceptable. Item challenges are made only during the examination. After two unsuccessful attempts, a candidate whose last score is within ten points of passing may request a review through the Board’s portal within 60 days; only missed questions are reviewed, the candidate may not retake the same examination for 14 days after the review, and a review no-show disqualifies the candidate from future review of that examination. A candidate who fails cannot retake for 30 days, and then only with all other eligibility requirements completed; a no-show forfeits the fee. The vendor’s general bulletin describes experimental, unscored questions generally; the sources do not relate that description to the outline’s 50-question total, and this guide states that relationship in neither direction. Neither sitting has a practical component.
Reference discipline: editions, annotations, and the desk
Open book in this system is a regulated condition, not a courtesy. Candidates bring their own listed references. References may be highlighted, underlined, annotated, and indexed before the examination, but may not be written in during it. Only permanent tabs are permitted; removable sticky notes are not. No papers may be attached or inserted into a reference. The edition rule then divides the shelf in two: later editions of listed references are generally acceptable, except for code books, where code questions are keyed only to the code edition listed for that examination. For the subclass candidate that exception is the whole ballgame on the two code volumes: the mechanical and fuel gas codes on the desk should be the listed 2021 editions, because those are the editions the answers key to, whatever a candidate’s field shelf holds after the field moves on. The outline adds one further caution in its own terms: trade-knowledge questions answerable from field experience may appear even where no listed reference covers the point, so the experienced candidate’s judgement is itself part of the examined material — and part of what timed practice with the actual references is for.
Eligibility, money, and the qualifying party system
The sequence begins at the Board, not at the vendor. The candidate applies to the Board — for licensure, an added classification, or an added qualifying party — and must be approved before the vendor will schedule an examination. Vendor eligibility is valid for one year, and the license application stays active for one year from receipt. No minimum years of trade experience are prescribed for the Mechanical classification in the statute and rule as retrieved; qualification runs through examination, the financial statement and net worth showing, and the background investigation. That absence is recorded here as a finding from the retrieved texts, not asserted as a guarantee against the live application, and candidates should complete the Board’s current application exactly as it presents itself. The net worth requirement is $50,000 or more for residential and commercial applicants, their subclassifications, and specialty classifications other than labor only, shown on a financial statement current to within twelve months, on the Board’s form, prepared and signed by an accountant, bookkeeper, or certified public accountant and signed by the applicant, and held confidential. A shortfall may be cured with an irrevocable letter of credit equal to the required net worth plus the applicant’s negative net worth, if any. The applicant, each principal, and each designated qualifying party must complete an application and pass a background investigation reaching fiduciary and monetary matters — bankruptcy, judgment, insolvency, foreclosure, lien — and criminal offenses, and the Board may deny licensure for cause shown. Entities must maintain active, good-standing status with the Secretary of State. Commercial applicants, candidates should note, are not under the statutory insurance-certificate requirement that applies to the residential-side classifications named in the statute.
The qualifying party is where Louisiana’s system puts its weight. The contractor must designate a qualifying party for each classification it holds and a qualifying party for the business and law requirement, and must maintain both for as long as it is licensed; failure to maintain a qualifying party is an enumerated discipline ground. A qualifying party must meet all application requirements, including the background investigation, and satisfy the examination or credential requirement for the classification. Principals and full-time employees may serve across the entity forms the rule lists, and every qualifying party must complete the online verification before the process begins, with an employee qualifying party attesting to full-time employment of at least 32 hours per week and employee status for tax purposes. Deceptive practices in connection with a Board-required examination make a person ineligible to serve as a qualifying party for three years. On termination, the license remains valid with restrictions: the licensee may continue existing work and bid, but may not begin work, until the qualifying party is replaced; the licensee must notify the Board in writing within 30 days and submit and qualify a replacement within 60 days, on pain of suspension, revocation, or removal of classifications.
The business and law requirement stands apart from both examinations and must not be rebuilt as one. It is an online course administered by the Board through its licensing portal. It is not a vendor examination, has no vendor bulletin entry, and is not bundled into either trade sitting. A qualifying party is designated specifically for it, the designated party completes it, and it is never waived in reciprocity. Beyond that character, its mechanics are unpublished in the sources for this guide — no pass standard, count, attempt limit, or fee for the course is stated here, because none appears in those sources. On money generally, this guide prints exactly one examination dollar: the vendor’s $140 fee for each of the two Mechanical-family sittings. No Board license or application amount is printed, because no current Board amount was published in the sources retrieved — the Board sets the annual license figure at its July meeting, and an unset figure continues the prior year’s — and the statute’s fee ceilings are ceilings, not amounts charged, and are never presented here as fees. Reciprocity and its neighbours complete the eligibility picture: the Board may waive the trade portion for an applicant licensed in a comparable classification elsewhere, on written certification of passing that state’s examination and of good standing, with the business and law course never waived; a holder of a Louisiana master plumber license is exempt from the trade examination requirement; the Board may exempt a qualifying party from required examinations in the circumstances the statute states; and a military pathway decides a complete application on the timeline the rule prescribes.
Renewal, standing, and the verified absence of an education duty
Licenses expire on the anniversary date of original issuance. At renewal the licensee elects a one-, two-, or three-year term, no term exceeding three years, and licenses dependent on acquiring insurance or certifications are not eligible for multi-year renewal. All fees must be paid before issuance. The late calendar is short: 15 days after expiration to renew without penalty, a delinquent charge thereafter on the statute’s terms, and a hard stop at one year, after which the license is no longer eligible for renewal and a fresh application is the only route back. Records and reporting duties run continuously: licensees maintain records for the period the governing instruments state and produce them on the Board’s request within the window those instruments prescribe — the instruments state their windows in their own terms, and this guide does not merge them — and notify the Board in writing of changes to application information and of criminal, civil, or administrative actions on the timelines prescribed.
Continuing education is stated here as a verified negative, with its boundary. No continuing-education requirement for commercial or Mechanical licensees appears in the Louisiana contractor statute or in the retrieved chapters of the Board’s rules. The sole education rule in the retrieved material imposes six annual hours on residential construction contractors and requires their evidence to be kept for five years; it does not reach the HVACR subclass licensee. A Louisiana subclass licensee therefore renews on term, fee, and standing, with no hours to accumulate — and should be able to say so precisely, because the assumption of a universal education duty is one of the most reliable ways generic material misdescribes this license. Discipline completes the standing picture in outline: the Board may revoke, suspend, refuse to renew, order cessation, impose fines, and debar on the grounds its statute enumerates, running from working without the proper classification to failing to maintain a qualifying party; a revoked licensee and qualifying party are ineligible to reapply for three years; and unlicensed contracting carries criminal exposure on the statute’s terms. This guide states no penalty dollars, because the package’s discipline is to print money only where the sources fix an amount a candidate must pay to sit or to hold the license — and on the Board side, as recorded above, no such current amount was published.
A study plan built on the split
First, fence the shelf. Remove every item keyed to the 2018 code editions and every plumbing item, however authoritative for the full examination, and rebuild the shelf from the subclass list alone: the two 2021 codes, the listed load manual, the refrigeration text in either listed edition, the duct standard, and the electrical reference in any of its listed editions. Second, study the eight blocks at their weights, which are nearly even. The two eight-question blocks and the two seven-question blocks deserve the deepest work, but the four five-question blocks together are twenty questions — forty percent of the sitting — and the balanced outline punishes the candidate who treats any of them as minor. Third, practise the desk. Timed, open-book work with the candidate’s own tabbed, annotated copies, under the prohibitions that will apply in the room, converts reference familiarity into retrieval speed at 130 minutes for 50 questions. Fourth, learn the Louisiana frame as its own syllabus. Classification position, the one-way door, the threshold and project-value rules, the qualifying party duties and clocks, the net worth and background gates, the course character of the business and law requirement, and anniversary renewal without an education duty form a finite body of system knowledge that supports both the sitting’s trade judgement and the licensee’s first year. Fifth, date-proof the plan. A candidate sitting across the January 1, 2027 field change should be able to state, without hesitation, which generation governs the field that month and which generation governs the room — and to keep answering the room’s generation in the room.
The errors this examination is built to catch
Preparing from the full examination is the master error, in all its forms: 2018 codes for a 2021 sitting, plumbing domains for an outline without them, a wider shelf for a six-reference list. Assuming the major authorises downward but the subclass authorises upward reverses the one-way door and misstates the license the candidate is actually buying. Treating the business and law course as an examination invents a sitting, a standard, and a fee that no source publishes. Assuming an education duty imports another license’s renewal rule into a license that has none. Quoting a Board fee from secondary material states as current an amount the Board resets annually and the sources for this guide do not publish. Assuming the 2027 field change re-keys the examination claims an announcement that has not been made. And dividing work to duck the $10,000 threshold fails the project-value rule the statute states expressly. Each error is a classification error or an edition error before it is a knowledge error — which is why this guide began with the architecture and the split.
Frequently asked questions
Why does the subclass examination use newer codes than the full examination?
Because the two outlines list different editions: the subclass lists the 2021 mechanical and fuel gas codes, and the full examination lists the 2018 editions of those codes and of the plumbing code. This guide records the split as the outlines print it and keys all subclass material to 2021.
How does a candidate become eligible to schedule?
By applying to the Board first and being approved; the vendor then schedules the examination, and that eligibility is valid for one year.
What net worth must be shown?
$50,000 or more for commercial applicants and their subclassifications, on the Board’s financial statement form, with a letter-of-credit cure for a shortfall on the statute’s terms.
What does a qualifying party do?
The qualifying party satisfies the examination or credential requirement for the classification, completes the verification, and anchors the license: the contractor must maintain one for each classification and one for the business and law requirement at all times while licensed.
Is there a practical or drawing test?
No. Both Mechanical-family sittings are computer-administered open-book examinations. The full examination’s isometric block is written content inside that sitting, and it is not part of the subclass outline.
What if a candidate fails?
Retaking is barred for 30 days, and then requires all other eligibility requirements to be complete. After two unsuccessful attempts, a candidate within ten points of passing may request the rule’s review through the Board’s portal within 60 days.
When does enrollment open for the PassProfessor program?
The program is in the works and enrollment is not yet open. Leave an email address on this page and PassProfessor will write to you when the program is ready — and only about this program.
