Hawaii’s C-40 Refrigeration Contractor is a specialty contractor classification under HRS Chapter 444, licensed to a contracting entity or sole proprietor through its responsible managing employee, for refrigeration work controlling air temperature below fifty degrees Fahrenheit. Hawaii examines contractor candidates in two written parts under a published licensing framework — scope, experience gate, fees, and renewal cycle all in print. The current PSI candidate bulletin, however, contains no C-40 trade section at all. This guide gives the verified framework in full and states the bulletin gap as the sourced position, because a guide that invented the missing section would fail its readers at the exact point it claimed to help them.
This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.
The credential at a glance
| Item | Verified position |
|---|---|
| Regulator | Contractors License Board (CLB), Professional and Vocational Licensing Division (PVL), Department of Commerce and Consumer Affairs (DCCA) |
| Examination vendor | PSI Services LLC, from January 2023; Board approval is required before registration |
| Structure | Two written parts: Part I Business and Law (common examination) and Part II Trade (C-40) |
| Part I | 80 questions, 180 minutes, closed book — the single common examination for Hawaii contractor classifications |
| Passing standard | A grade of seventy-five per cent is the minimum passing grade for each part of any examination (HAR §16-77-44) |
| Part II (C-40 Trade) as printed | NOT PUBLISHED — Bulletin 10661 contains no C-40 section; no Part II trade mechanics are stated in any direction |
| Code position | No statewide mechanical code exists in Hawaii; licensing is not keyed to a state mechanical code |
| Practical component | None published — the examinations are written examinations by rule |
The framework first: who licenses, who holds, who qualifies
Hawaii’s contractor system begins with a decision about what a license is. Under HRS Chapter 444, contractor licenses are issued by the Contractors License Board (CLB), housed in the Professional and Vocational Licensing Division (PVL) of the Department of Commerce and Consumer Affairs (DCCA), to contracting entities and sole proprietors — businesses — rather than to individual tradespeople. The administering rules sit at HAR Title 16, Chapter 77, the fee schedule at HAR §16-53-17, and the classification scopes in Exhibit A to HAR Chapter 16-77, incorporated by HAR §16-77-28(c). C-40 exists inside that architecture as one of the specialty contractor “C” classifications.
The business is qualified by a person: the responsible managing employee (RME), the individual who holds the experience in the classification and passes the examinations. The license issues to the entity through its principal RME, who carries defined duties — residence in the State, signing or initialling all contracts, and responsibility for violations. An RME may serve more than one entity only on Board approval, under the ownership and family conditions of HAR §16-77-72. The examination is taken by an individual, but the credential it qualifies belongs to a business.
Beneath the contractor tier, Hawaii built nothing for this trade. No journeyman, apprentice, technician, or helper license exists for refrigeration or air conditioning work in HRS Chapter 444 or HAR Chapter 16-77; journey-worker licenses in Hawaii exist only for electricians and plumbers, under HRS Chapter 448E and a separate board. Unlicensed individuals perform the work only as wage employees of a licensed contracting entity — there is no Hawaii refrigeration ladder to climb. Nor does any other license quietly contain C-40. A specialty licensee automatically holds the subclassifications of its own specialty, without examination or additional fees — but a general engineering (“A”) or general building (“B”) licensee does not acquire C-40 automatically, and work performed outside the classifications held is unlicensed activity. A license is required to act, assume to act, advertise, or bid as a contractor (HRS §444-9; HAR §16-77-4(a)). Against that breadth stands one narrow exemption: a project whose aggregate contract price for labor and materials is not more than $1,500 — relief that disappears where a building permit is required, or where the work is part of a larger project or split to evade the chapter (HRS §444-2(4)).
The scope in depth: reading Exhibit A word by word
The C-40 scope, as published in Exhibit A, authorises the licensee: to assemble and install devices, machinery, and units, including temperature insulation units, ducts, blowers, registers, humidity, and thermostatic controls for the control of air temperature below fifty degrees Fahrenheit in refrigerators, refrigerator rooms, and insulated refrigerator spaces; and to construct walk-in refrigerator boxes.
Each element carries weight. Assemble and install is the operative verb pair: the classification is an installation and construction authority, reaching the building-up of refrigeration installations from devices, machinery, and units. The included apparatus list — temperature insulation units, ducts, blowers, registers, and humidity and thermostatic controls — describes the working envelope of a controlled cold space: the enclosure’s insulation, the air movement, and the controls by which temperature and humidity are held. The classification claims the whole envelope, not the compressor alone. The settings are named concretely: refrigerators, refrigerator rooms, and insulated refrigerator spaces. And the construction clause stands on its own: to construct walk-in refrigerator boxes — not an implication of this license, but its final stated power, and for many C-40 businesses its commercial centre.
The fifty-degree line organises everything. The scope is written around the control of air temperature below fifty degrees Fahrenheit, the operative boundary between C-40 refrigeration work and the air conditioning territory of the neighbouring classification, as the two are written. Comfort cooling lives above the line; refrigeration — the cold chain of food storage, cold rooms, and refrigerated spaces — lives below it. The same building may hold work on both sides of the line, held by different classifications, and a licensee whose authority stops at the line must treat the other side as another licensee’s work. This is why the scope, rather than any syllabus, is the first study document for this classification: it is the only trade-content text Hawaii has published for C-40.
Beneath C-40 sits its one named subclassification: C-40a, the prefabricated refrigerator panels contractor, authorised to install prefabricated refrigerator panels. Because a specialty licensee automatically holds its own subclassifications, the C-40 licensee holds C-40a with it — panel installation is inside the C-40 grant, while the standalone subclassification exists for the narrower operator whose work is panels alone.
The route, step by step
Step one — form the application pair. A separate application is filed for the contracting entity and for the RME; each files, and each pays. One application may seek more than one classification, and an additional-classification application carries the same fee. The PVL application fee is $50 per application, non-refundable, payable to Commerce and Consumer Affairs. Insurance prerequisites stand ready at issuance: workers’ compensation coverage, and liability and property-damage coverage of at least bodily injury $100,000 each person and $300,000 each occurrence, and property damage $50,000 each occurrence, plus any Board-imposed bond.
Step two — prove four supervisory years in this classification. The individual applicant or RME must show not less than four years of supervisory experience as a foreman, supervising employee, or contractor in the C-40 classification, within the past ten years immediately preceding application (HAR §16-77-18), describing on-site supervision and direction of employees in the classification. Proof is documentary: not less than three notarised certificates, plus a Chronological History of Projects Form — the Project List — per classification. Experience is measured per classification: a candidate seeking two classifications qualifies in each, documents each, and sits a trade examination for each. Training may count up to a maximum of one year (HAR §16-77-19), as a supplement to a record built on supervised refrigeration work. The applicant must be at least 18 years old and of good reputation for honesty, truthfulness, financial integrity, and fair dealing, with an undisputed debt or judgment failure within six years creating a presumption against financial integrity (HRS §444-11(a)).
Step three — obtain Board approval before any examination registration. Board pre-approval is mandatory; PSI registration opens only after it, and the approval letter states the date by which the examinations must be passed. That date starts the six-month clock described below.
Step four — sit the examinations. Two written parts, stated without blending in the next section — with the bulletin position on the trade part stated exactly as it stands.
Step five — hold the license on the fixed cycle, detailed near the end of this guide — including the verified absence of any continuing education condition.
The two parts — and the gap inside the second
Hawaii examines contractor candidates in two written parts. Part I — Business and Law is a single common examination, shared across classifications; by rule it tests general knowledge of the building, safety, health, labor, and lien laws of the State and the basic administrative principles of the contracting business (HAR §16-77-39). Its published mechanics are 80 questions, 180 minutes, closed book. All new approved applicants take Part I. A candidate already licensed who is adding C-40 takes only the Part II trade examination (HAR §16-77-35(a)). In this guide, Part I is treated as structure and boundary — its requirement, character, and mechanics in full, its detailed content the province of the catalog’s business and law family. It remains a full examination that must be passed on its own standard.
Part II — Trade is the classification examination: by rule, it tests specialised knowledge in the particular classification (HAR §16-77-40). For C-40, the classification whose knowledge is at issue is defined by the Exhibit A scope above — refrigeration assembly and installation, the cold-space envelope and its controls, and walk-in construction, below the fifty-degree line. Part II is a written examination by rule. The standard governing it is the standard governing every part: “A grade of seventy-five per cent shall be a minimum passing grade for each part of any examination” (HAR §16-77-44). No practical or drawing component is published for the C-40 route.
And here the published record stops, and this guide stops with it. The PSI Hawaii Contractor Examinations Candidate Information Bulletin of record — Bulletin 10661, dated January 20, 2026 — contains no C-40 section. The absence is not an inference: a full-text search of the retrieved bulletin returns no C-40 entry, and the bulletin’s classification sequence passes directly from C-37B to C-41. In consequence, the C-40 trade part’s printed mechanics are not verified in any direction, and this guide states none of them — no figure for its length, no statement of its internal structure, no list of its reading, and no statement of the terms on which materials may or may not be present in the room — because Hawaii’s bulletin states none of them, and a guide’s job is to report the record, not to complete it.
Three disciplines follow for the candidate. First, borrow nothing. Figures in circulation for other classifications’ trade examinations belong to those classifications; transferring any of them to C-40 builds the route on a section that does not exist. This guide and its companion page transfer none. Second, discount vendor certainty. Secondary material circulates C-40 topic lists and reading bundles presented as the examination’s own; none of it appears in the bulletin, none is verified against any primary source in the fact base, and none is reproduced here. Third, use the channel that can close the gap. The Board and PVL are the authorities on their own examination program: confirm the current bulletin position at application and again at approval, and treat any future published C-40 section as the moment the trade part’s mechanics become statable. Until then, the verified preparation core is the classification itself: its scope, its framework, its gate, and the common Part I whose mechanics are published in full.
The code position: no statewide mechanical code
C-40 inherits the Hawaii code position whole. Hawaii has no statewide mechanical code. No statute or rule in the licensing frame adopts one, and HRS Chapter 444 and HAR Chapter 16-77 contain no mechanical-code adoption at all. Building regulation runs through the State Building Code process (HRS Chapter 107; State Building Code Council) and through county adoption and enforcement, with state projects subject to the state code directly. The verified negative, stated precisely, is the absence of a statewide mechanical adoption — not the absence of building regulation. It follows that this guide states no field mechanical-code edition for Hawaii and no C-40 examination reading list: the bulletin publishes no C-40 list, the licensing frame adopts no mechanical code, and a book appearing on another classification’s printed list says nothing about C-40. The anchors Hawaii has actually published are its scope, its statute and rules, and the rule frame for its examinations.
Fees and the six-month window
The money runs through separate instruments, kept separate here. PVL application layer: $50 per application, non-refundable, payable to Commerce and Consumer Affairs — entity and RME each file and each pay, and an additional-classification application is $50. PSI examination layer: $80 per part, non-refundable and non-transferable, valid for one year from payment; the fee schedule rule itself sets no examination amount, leaving it to the Board’s agreement with its vendor. Initial-license layer: no total is stated, deliberately — the only published totals in the fact base are dated figures that do not reconcile with the rule’s fee components or the application forms’ own fee codes, and PVL’s current packets state that specific initial amounts are given at the appropriate time. Budget on the two verified layers and confirm the initial amount with PVL when the Board gives it.
The window is the sharper discipline. Applicants must pass the examinations within six (6) months of approval; an applicant who does not pass within six months must file a new application and application fee (HAR §16-77-45). Inside the window, the bulletin’s general delivery mechanics apply to the C-40 candidate: testing is unlimited; no appointment may be made on the same day as a taken examination; an unsuccessful candidate may be able to retest within two business days; and rescheduling or cancelling without forfeiting the fee requires notice two days before the appointment, with voicemail and email not acceptable as that notice. Examinations are delivered at test centers in Kapaa, Honolulu, Kahului, and Kailua Kona, with remote proctored delivery also offered; candidates arrive 30 minutes early with one government-issued photo identification. The practical reading: apply when the experience record is complete, confirm the examination position at approval, and sit early enough inside the six months that the window never becomes the story.
Holding the license: renewal, restoration, and what Hawaii does not require
Every Hawaii contractor license runs on the same fixed biennial cycle: regardless of issuance date, licenses renew by September 30 of each even-numbered year. Failure to pay and submit by that date is an automatic forfeiture without a hearing, effective October 1, and an unrenewed license may not practise. For the current published period — October 1, 2026 through September 30, 2028 — on-time renewal is $338.00 for a contractor entity (active), $338.00 for a sole proprietor (active), $208.00 for an RME (active), and $160.00 for any license on inactive status. Renewal conditions track continued qualification: a current state tax clearance, issued within six months, whose tax name matches the PVL license name exactly; continuous insurance at the issuance minimums; and any Board-imposed bond kept current.
A forfeited license may be restored on submission of all documents and fees plus a penalty fee within sixty days from September 30 — on or before November 30 of the renewal year. Published restoration totals for the same period are $388.00 for an entity (active), $388.00 for a sole proprietor (active), $258.00 for an RME (active), and $210.00 for inactive status. Miss the restoration window and the license is terminated: the person must apply as a new applicant meeting current requirements.
Two verified negatives complete the holding picture. Continuing education: none. No provision of HRS Chapter 444, HAR Chapter 16-77, the fee schedule, or PVL’s renewal requirements imposes CE hours, courses, or attestation on contractor entities, sole proprietors, or RMEs as a condition of renewal — a requirement Hawaii law does impose on electricians under a different chapter and board, and which must not be imported here. Reciprocity: none. Hawaii has no reciprocity agreements with any other state; out-of-state experience may be documented toward the four-year gate, and the only examination waiver is for prior qualification by written examination in Hawaii in the same classification, within the four-year windows of HAR §16-77-41. EPA Section 608 certification is likewise not a condition of the C-40 license in any source in the fact base — the contractor law’s refrigerant provisions operate as discipline grounds, not as an application prerequisite — and the federal certification is its own separate program in this catalog.
A study plan for a classification with a published scope and an unpublished trade section
An honest plan for C-40 is built in the order Hawaii published things. First, the scope as a text: study Exhibit A’s C-40 paragraph until each element can be accounted for cold — the verb pair, the apparatus list, the named settings, the walk-in clause, the fifty-degree line, and the C-40a panels subclassification — sorting described work by the line, because classification sorting is the daily act this license performs. Second, the framework as a system: the entity-and-RME structure, the act-advertise-bid reach of the license requirement, the $1,500 handyman exemption and its carve-outs, the no-reciprocity position, and the same-classification waiver. Third, the gate as a document exercise: four supervisory years in this classification inside ten, proven by three notarised certificates and a Project List — assemble the record as the Board will read it. Fourth, Part I prepared as an examination: its mechanics are published in full, and it is the one sitting in this route whose shape is completely known — schedule its preparation in parallel, not in leftover time. Fifth, trade knowledge organised by the scope, not by an imagined syllabus: refrigeration assembly and installation, the cold-space envelope, and walk-in construction, studied as the classification’s published centre of work, while the bulletin position is confirmed with the Board. Sixth, the calendar: the six-month pass window, September 30, and the sixty-day restoration window, learned now.
The errors this route is built to catch
Inventing the trade section — preparing to a borrowed count, syllabus, or reading list for a bulletin section that does not exist, instead of to the scope and framework Hawaii published. Trusting vendor lists for C-40, which circulate without a primary source behind them. Sorting work by habit rather than by the fifty-degree line. Treating the RME as a personal license, when the credential belongs to the entity. Documenting experience generally — years in refrigeration, loosely described — when the gate demands supervisory years in this classification, described as supervision, proven in the Board’s forms. Importing other regimes: reciprocity Hawaii does not offer, continuing education Hawaii does not impose, a statewide mechanical code Hawaii has not adopted, and a federal certification Hawaii does not make a condition of this license. And missing the fixed dates — six months to pass, September 30 to renew, sixty days to restore.
Hawaii C-40 in one view
Hawaii C-40 in one view is a precisely drawn classification inside an incompletely published examination program — and this guide’s honesty about the second half of that sentence is what makes the first half usable. The classification itself is fully in print: a temperature line, a scope that names its apparatus and settings and ends on the walk-in box, a panels subclassification, an entity license qualified by a resident accountable individual, a four-year supervisory gate proven in notarised documents, two written examination parts under one rule standard, and a fixed biennial date on which the license renews or falls. What is not in print is one bulletin’s C-40 section, and the correct professional response is the one this guide models: state it, borrow nothing across it, confirm it through the Board, and prepare thoroughly on everything the State has actually published. Hawaii has stated this classification’s boundary at fifty degrees; the candidate who prepares inside the published lines, and says plainly where the lines run out, is already practising the discipline the license exists to certify. The companion program page, Hawaii C-40 Refrigeration Contractor exam preparation, summarises the program this guide supports.
Independence, stated plainly. PassProfessor is an independent preparation provider and is not affiliated with the Contractors License Board, the Professional and Vocational Licensing Division, the Department of Commerce and Consumer Affairs, or PSI. This guide states the published route and the published gap; the Board alone licenses, and only Board approval followed by PSI registration puts a candidate in the examination room.
Tell me when enrollment opens. The Hawaii C-40 Refrigeration Contractor program is in the works and enrollment is not yet open. Leave an email address and PassProfessor will write to you when the program is ready — and only about this program.
Frequently asked questions
What is the C-40 classification, in one sentence?
The Hawaii specialty contractor classification for assembling and installing refrigeration devices, machinery, and units — with their insulation, ducts, blowers, registers, and controls — controlling air temperature below fifty degrees Fahrenheit in refrigerators, refrigerator rooms, and insulated refrigerator spaces, and for constructing walk-in refrigerator boxes.
What experience does the C-40 RME need?
Not less than four years of supervisory experience as a foreman, supervising employee, or contractor in the C-40 classification, within the past ten years, describing on-site supervision and direction of employees — proven by at least three notarised certificates and a Project List for the classification. Training may count for up to one year. Experience is per classification: each classification sought is qualified, documented, and examined separately.
What examinations does a new C-40 applicant take?
Two written parts: Part I Business and Law — the common examination, 80 questions in 180 minutes, closed book — and Part II Trade for C-40 under HAR §16-77-40. An already-licensed candidate adding C-40 takes only Part II.
What is the passing standard?
The rule states it for every part: a grade of seventy-five per cent shall be a minimum passing grade for each part of any examination (HAR §16-77-44).
Why does this guide give no further detail about the C-40 trade examination?
Because the PSI bulletin of record — Bulletin 10661, dated January 20, 2026 — contains no C-40 section; its classification sequence passes from C-37B to C-41. The trade part’s printed mechanics are therefore not verified in any direction, and this guide states none, borrows none from any other classification, and reproduces no vendor list. Confirm the current position with the Board and PVL at application and approval.
Does Hawaii have a mechanical code that governs C-40 preparation?
Hawaii has no statewide mechanical code, and licensing is not keyed to one; building regulation runs through the State Building Code process and county adoption and enforcement. This guide states no Hawaii field mechanical-code edition and no C-40 reading list, because neither is published for this classification.
When does the license renew, and what if renewal is missed?
All licenses renew by September 30 of each even-numbered year. Missing the date is an automatic forfeiture effective October 1; restoration is available within sixty days from September 30, by November 30, on all documents and fees plus a penalty — after which the license is terminated and the person applies as a new applicant. Hawaii imposes no continuing education requirement for these licenses.
Is PassProfessor affiliated with the Hawaii Contractors License Board or PSI?
No. PassProfessor is an independent preparation provider, not affiliated with the Contractors License Board, the Professional and Vocational Licensing Division, the Department of Commerce and Consumer Affairs, or PSI.
