Hawaii’s journeyman plumber credential is designated PJ, with PM as the master plumber credential above it. Journeyman candidates are examined by PSI on the 2018 Uniform Plumbing Code, and in Hawaii the edition tested is the edition adopted — the code a candidate studies for the examination is the code in force for the work. The PassProfessor Hawaii Journeyman Plumber program prepares candidates for that PJ examination, and its program page is at /hawaii-journeyman-plumber-exam-prep/.
This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.
The credential at a glance
| Item | Verified position |
|---|---|
| Program | Hawaii Journeyman Plumber: the PJ journeyman credential |
| Credential designations | PJ = Journeyman Plumber; PM = Master Plumber |
| Examination vendor | PSI, under its Plumber Examinations bulletin for Hawaii |
| Code examined | Uniform Plumbing Code, 2018 edition (UPC 2018) |
| Tested versus adopted | Tested = adopted: Hawaii examines on the 2018 UPC, the edition adopted in Hawaii |
| Not this credential | The C-37 contractor examination is a separate credential and a separate route |
| Companion program page | /hawaii-journeyman-plumber-exam-prep/ |
| Administrator note | PassProfessor is independent and is not affiliated with PSI or with Hawaii’s plumbing licensing authority |
Hawaii’s journeyman system is unusually clean to describe, and this guide keeps it that way. There is one journeyman credential, designated PJ. There is one master credential above it, designated PM. There is one examination vendor, PSI, and one code, the 2018 Uniform Plumbing Code, which is both adopted and examined. Almost every error available to a Hawaii candidate comes from importing a complication that belongs to another state — a different vendor, a different edition, a contractor examination mistaken for the journeyman one. The guide therefore spends its length on the two things that actually decide this sitting: mastery of the 2018 UPC as a working document, and precision about the Hawaii route itself.
Reading the verified facts
This guide states only what its verified source record supports. From that record: the PJ and PM designations, PSI as vendor under its Plumber Examinations bulletin, the 2018 UPC as the examined edition, the tested-equals-adopted position, and the separateness of the C-37 contractor examination. The record used for this guide does not carry a passing score, a question count, a time limit, a book status, or an examination fee for the PJ sitting, and this guide prints none of them. That absence is deliberate, not an oversight. Plumbing figures circulate widely in secondary material, copied between states and editions until their origin is untraceable; a candidate who needs those figures should take them from PSI’s current Hawaii bulletin at scheduling time, where they are operative, rather than from any guide — including this one.
The route, step by step
Step one — fix the credential. Confirm that the work you intend to do requires the PJ, Hawaii’s Journeyman Plumber credential, and not the C-37 contractor credential, which sits on a different route and is examined separately. Candidates who intend eventually to operate a contracting business may need both routes in sequence, but each examination is its own event and each must be prepared for on its own terms.
Step two — confirm eligibility. Journeyman status follows the apprenticeship stage of the trade. Confirm with Hawaii’s licensing authority that your training and experience position you for the PJ before you schedule anything; eligibility questions are answered by the authority, not by a preparation provider and not by the examination vendor.
Step three — follow the PSI bulletin. Hawaii journeyman examinations are administered by PSI. Its Plumber Examinations bulletin for Hawaii is the operative document for approval, scheduling, identification and sitting arrangements, and any examination mechanics in force at your sitting. Read the current bulletin, not a saved copy from an earlier cycle and not another state’s PSI bulletin — PSI administers plumbing examinations in many states, on different codes and different terms, and its bulletins are state-specific.
Step four — prepare on the 2018 UPC. Build preparation entirely on the 2018 Uniform Plumbing Code, as the sections below set out. Resist supplementing with later-edition material or with International Plumbing Code material from other states’ programs; in a tested-equals-adopted state, the only edition discipline required is fidelity to 2018.
Step five — sit, and then hold the credential properly. Sit the examination through PSI. Afterwards, follow the licensing authority’s instructions for issuance and for the obligations that run with the credential. If a sitting is unsuccessful, use the retake arrangements in the current bulletin and rebuild preparation around what the sitting exposed.
The code in full: preparing on the 2018 UPC
Drainage, waste, and venting
This is the centre of gravity of journeyman plumbing and of any UPC-based examination. The candidate needs fluent command of drainage fixture units and what they represent, sizing of building drains and sewers, trap requirements and trap protection, cleanout location and access, and — above all — venting: the types of venting the 2018 UPC recognises, the sizing and routing rules for each, and the physical reasoning underneath them. A vent system exists to protect trap seals from siphonage and back pressure while admitting air so drainage flows. Items in this area typically describe a fixture group and a proposed vent arrangement and ask whether the arrangement complies, or which single change makes it comply. Candidates who can reason from the purpose of venting to the provision, rather than reciting vent types as a list, handle the variations the sitting invents.
Water supply, sizing, and protection
The supply side divides into quantity and protection. Quantity is sizing: estimating demand, applying the code’s sizing method, and keeping pressures within the range fixtures and equipment require. Protection is the more heavily consequential half: backflow prevention, cross-connection control, and the separation of potable water from every system that could contaminate it. In Hawaii’s building stock — high-rise residential and resort buildings, hospitals and other institutional occupancies, and commercial premises of every kind — supply systems are tall, complex, and heavily protected, and journeyman judgement about backflow assemblies and their placement is exercised constantly. Preparation should treat protection provisions as first-order code, not as a specialty chapter to be skimmed.
Fixtures, fittings, and installation standards
Fixture provisions test precision: which fixtures are permitted, how they are installed and supported, the clearances and connections the code specifies, and the quality and materials standards that apply to fittings. These items reward candidates who have installed to inspection rather than merely to function, because the difference between the two is exactly what the provisions describe.
Water heaters and fuel gas
Water heater provisions cover installation, venting of combustion products where applicable, temperature and pressure relief, and the safeguards around stored hot water. Fuel gas piping provisions cover sizing, materials, installation, and testing of gas systems within the plumbing scope. Both areas carry safety weight out of proportion to their page count, and both are areas where a field habit formed outside the code can produce a confident wrong answer.
Indirect waste, interceptors, and special systems
Commercial and institutional work brings indirect waste requirements, grease and other interceptors, and special waste handling that residential apprenticeships may touch lightly or not at all. Because Hawaii’s economy runs heavily on hospitality — hotels, restaurants, and food service at scale — this corner of the code is not marginal in Hawaii practice, and it should not be marginal in Hawaii preparation. A candidate whose background is residential should schedule deliberate study time here rather than discovering the gap in the examination room.
Materials, joints, and general provisions
Underneath the system chapters sit the general provisions: approved materials for each service, permitted joints and connections, support and protection of piping, and workmanship standards. These provisions decide many real inspection outcomes, and they decide examination items that present an installation detail — a joint, a support spacing, a material substitution — and ask whether it complies. Candidates often under-study this layer because it lacks the narrative pull of drainage design; the sitting does not share that preference.
Tested equals adopted: studying in an aligned state
Candidates moving to Hawaii from edition-gap states sometimes study defensively, maintaining two versions of contested provisions — the adopted one for work and the tested one for the examination. In Hawaii that effort is wasted, and worse, it introduces errors: a candidate who has learned to second-guess which edition an answer belongs to may second-guess a correct 2018 answer. The Hawaii position is simple. The 2018 UPC is adopted, and the 2018 UPC is examined. Learn it once, learn it thoroughly, and apply it in both places.
The remaining edition risk is external. Study products are national, and national products are frequently keyed to the newest UPC edition or to a blend of state requirements. A provision stated confidently in a national product may reflect the 2021 or 2024 UPC, or another state’s amendment, and differ from Hawaii’s 2018 text. The defence is source discipline: when any study statement matters, check it against the 2018 UPC itself. That habit — provision first, summary second — is also the habit the examination itself rewards, because its items are written against the code text.
The C-37 boundary, in depth
Because the confusion is common and costly, it deserves a section of its own. Hawaii licenses plumbing work at two different levels of responsibility that outsiders routinely merge. The PJ certifies a person as a journeyman plumber — a qualified practitioner of the trade. The C-37 route concerns contractor licensing — the authority to operate as a plumbing contractor. The examinations are different, the candidate populations are different, and preparation for one does not substitute for preparation for the other. A journeyman candidate who buys contractor preparation will study business and contractor material while the drainage, venting, and protection provisions that decide the PJ sitting go unpractised. A candidate who genuinely needs the contractor credential should take that examination as its own project, in its own time. This guide, and the PassProfessor program it accompanies, address the PJ only.
The sitting itself
The sitting is administered by PSI, and its practical arrangements — where and when examinations are offered, what identification and materials arrangements apply, and how results and retakes are handled — are those in PSI’s current Hawaii Plumber Examinations bulletin. This guide deliberately prints no question count, time limit, book status, passing score, or fee for the sitting, because none of those figures is carried in the verified record behind this package, and printing an unverified figure would expose candidates to exactly the stale-copy risk the previous sections warn against. What can be said usefully is procedural: obtain the current bulletin when you are approved to schedule, read it in full, and treat it — not forums, not co-workers’ recollections of earlier sittings, and not other states’ bulletins — as the authority for your sitting day.
A study plan built on how this examination is put together
Sequence the work by weight and by gap. First, drainage and venting to fluency — fixture units, sizing, traps, and every venting arrangement the 2018 UPC recognises, practised as system problems rather than as lists. Second, water supply in both halves — sizing method and protection provisions together, with backflow and cross-connection control treated as core material. Third, the supporting chapters — fixtures and fittings, water heaters and fuel gas, materials and joints — studied to the provision level. Fourth, the under-served areas your apprenticeship missed, which for most candidates means indirect waste, interceptors, and institutional protection requirements; be honest in the audit, because the examination will be. Fifth, mixed timed practice across all areas together, in 2018 UPC terms only, so that the sitting’s alternation between systems feels familiar rather than disorienting.
The working method: turning the code into a performance
There is a difference between having read the code and being able to perform it under examination conditions, and the method below closes that gap. Work from provisions, not summaries. Every study session should end at the code text itself for at least the provisions the session’s errors touched; summaries are maps, and the sitting tests the territory. Perform under sitting conditions early. From the second week onward, practise timed and uninterrupted, so that pace becomes calibrated rather than hoped for. Sort every error by kind. Misses divide into provisions never learned, provisions misread under pressure, sizing or calculation set-ups gone wrong, and answers imported from another edition or another code. Each family has a different cure, and the fourth family — edition contamination — is the one Hawaii candidates can eliminate entirely by studying 2018 material only. Rotate the systems. Drainage, supply, protection, and the special chapters should alternate inside single sessions, because the real sitting alternates them and the mental switch is itself a skill. Revisit on a lengthening interval. Material answered correctly returns after days, then weeks; material missed returns the next day. By the sitting, the candidate has not merely met every major provision but has retrieved each one repeatedly, under time, in mixed company.
The errors this examination is built to catch
A UPC journeyman sitting is built to catch a recognisable set of errors, and Hawaii adds its own. Answering from field habit — choosing the installation that gets done rather than the one the 2018 UPC permits — is the standing error across all areas. Venting by resemblance, approving an arrangement because it looks like systems that passed elsewhere, fails against items engineered with one provision-level defect. Treating backflow protection as specialty material fails in a state whose building stock demands it daily. Edition contamination — importing a later UPC provision or an International Plumbing Code rule learned in another state — produces confident wrong answers that feel like knowledge. And the two Hawaii administrative errors: preparing for the C-37 instead of the PJ, and following another state’s PSI bulletin for a Hawaii sitting. Both are entirely avoidable, and both are avoided by the discipline this guide opened with — right credential, right vendor document, right edition.
Hawaii in one view
Hawaii in one view is alignment. One journeyman designation, PJ; one master designation above it, PM; one vendor, PSI; one code, the 2018 Uniform Plumbing Code, adopted and examined in the same edition. The candidate’s task is correspondingly focused: there is no edition gap to bridge, no vendor maze to navigate, and no contractor examination hiding inside the journeyman one. What remains is the trade itself, examined at journeyman depth — drainage and venting reasoned from first principles, water supplied in the right quantity and protected without compromise, and the wider chapters of the code mastered beyond the limits of one apprenticeship’s daily work. A candidate who builds that breadth on the 2018 text, and who keeps the Hawaii route facts as clean as the state itself keeps them, arrives at the PSI sitting with the examination’s structure working for them rather than against them.
After the sitting: the credential and its work
Passing the examination completes the examined step toward the PJ; the credential itself is issued under Hawaii’s licensing authority, and its holder then works as a journeyman plumber under the 2018 UPC as adopted — the same text the examination tested, which is the practical payoff of the aligned system. Journeymen who later aim at the master level look to the PM, the next and separate examined step. Between sittings and across a career, the working discipline is unchanged: the code as adopted is the standard for the work, and keeping current with it is part of holding the credential in good standing. Candidates should follow the licensing authority’s published requirements for the credential’s maintenance rather than relying on summaries, in this as in every other Hawaii particular.
That continuity also shapes how a newly credentialed journeyman should keep learning. The provisions that decided the sitting — drainage and venting design, supply sizing, backflow protection — do not retire once the examination is passed; they recur in every inspection, every alteration to an older system, and every commercial installation whose complexity exceeds the original design. A journeyman who keeps the 2018 UPC open as a working reference, who checks amended or unfamiliar conditions against the text rather than against habit, and who treats each inspection outcome as code feedback, is practising in exactly the way the examination was built to certify. In an aligned state, examination preparation is not a detour from the trade. Done properly, on the right edition and through the right vendor’s documents, it is the trade, studied once at the depth the credential requires.
Frequently asked questions
What does PJ stand for in Hawaii?
PJ is the designation for Hawaii’s Journeyman Plumber credential. PM designates the Master Plumber credential above it.
Which code edition should Hawaii journeyman candidates study?
The 2018 Uniform Plumbing Code. It is the edition PSI examines Hawaii candidates on, and it is the edition adopted in Hawaii.
What if I studied a newer UPC edition for work in another state?
Re-anchor every provision to the 2018 text before the sitting. Later-edition provisions may differ, and the Hawaii examination keys to 2018.
Who administers the examination, and where do its rules live?
PSI administers it. The operative document is PSI’s Plumber Examinations bulletin for Hawaii — the current edition of that bulletin, not another state’s.
What is the passing score, and how many questions are on the examination?
This guide prints neither figure, because neither is carried in the verified source record behind it. Take both from PSI’s current Hawaii bulletin when you are approved to schedule.
Is the C-37 examination part of becoming a journeyman?
No. The C-37 contractor examination belongs to the contractor licensing route. It is a separate credential, examined separately, and it is not a step in the PJ route.
Does this guide’s program page cover the same material?
The companion program page at /hawaii-journeyman-plumber-exam-prep/ describes the PassProfessor Hawaii Journeyman Plumber program and what it will cover. This guide covers the credential, the route, and the examination itself.
Is PassProfessor affiliated with PSI or with Hawaii’s licensing authority?
No. PassProfessor is an independent preparation provider. PSI administers the examination, and the licensing authority alone licenses.
When does enrollment open for the PassProfessor program?
The program is in the works and enrollment is not yet open. Leave an email address on this page and PassProfessor will write to you when the program is ready — and only about this program.
