AWS CWI Exam Guide: Fundamentals, Practical and Code Book, Explained

Part of the expanding PassProfessor catalog: The Certified Welding Inspector (CWI) credential from the American Welding Society (AWS) is earned by passing three separate examinations — Part A (Fundamentals), a 150-question closed-book test; Part B (Practical), a hands-on examination of 46 questions; and Part C (Code Book), an open-book examination of 50 to 65 questions on one code the candidate selects — with a minimum score of 72% required on each part separately. Eligibility pairs education with welding-based work experience, from one year with a welding engineering degree to five years with a high school diploma. PassProfessor’s AWS CWI program is in development.

This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.

The program is in development, built on the published structure for these examinations. Join the notify list and we will email you when enrollment opens — then use this guide to plan your preparation part by part.

Most certification examinations test one kind of competence. The CWI tests three, in three different rooms, under three different rules: what you know without a book, what your hands and eyes can do with a gauge and a specimen, and how fast and accurately you can find and apply a requirement inside a code book you brought with you. Training for only the first of those is the most common way this credential defeats experienced inspectors. PassProfessor’s AWS Certified Welding Inspector program is in development as part of the expanding PassProfessor catalog, built part by part on AWS’s published examination structure.

Which credential is this?

This guide covers the AWS Certified Welding Inspector (CWI) only — the full inspector credential governed by AWS QC1 and the qualification specification AWS B5.1. It sits between two neighbors it must not be confused with: the Certified Associate Welding Inspector (CAWI), the entry-level credential for candidates who meet the experience floor but score in the associate band, and the Senior Certified Welding Inspector (SCWI), the advanced credential for long-serving CWIs. Both are separate credentials with their own requirements; this guide prepares candidates for the CWI’s three parts, and associate and senior facts are signposted, never merged. The CWI is a certification awarded by AWS; it is not a state license, although employers, codes and project specifications routinely require it for inspection work.

The real exams at a glance

Fact of recordDetail
CredentialCertified Welding Inspector (CWI)
Awarding bodyAmerican Welding Society (AWS), under AWS QC1 (Standard for AWS Certification of Welding Inspectors) and AWS B5.1 (Specification for the Qualification of Welding Inspectors)
Part A — Fundamentals150 questions, closed book, computer-based at Prometric centers; covers destructive testing, fabrication math and formulas, safety, metallurgy, nondestructive testing, welding symbols, WPS/PQR and welding fundamentals, as AWS publishes the coverage
Part B — PracticalHands-on activities using equipment provided by AWS, with 46 questions related to those activities — application of WPSs and PQRs, use of inspection tools and methods, and execution of required welds — administered at AWS seminar and examination sites
Part C — Code BookOpen-book examination of 50 to 65 questions based on one code book the candidate selects and brings, from AWS’s published list (including AWS D1.1, API 1104, AWS D1.2, AWS D1.5, AWS D15.1, AWS D17.1, ASME Section IX with B31.1/B31.3, and ISO options)
Passing standardA minimum score of 72% on each part separately, as AWS publishes it; all three parts must be passed
EligibilityA combination of education and welding-based work experience with supporting documentation, plus a vision test (see eligibility table below)
MaintenanceCertification runs on a nine-year cycle with renewal applications at years three and six, and recertification at year nine by Part B examination, continuing education (80 Professional Development Hours) or the other routes AWS publishes

Who can sit the CWI examinations?

AWS qualifies candidates on education and experience together, with documentation, plus a vision test. The table below is AWS’s published pairing, exactly as AWS states it:

Minimum educationMinimum work experience
Bachelor or higher degree in welding engineering or welding technology1 year of welding-based work experience
Associate or higher degree in welding, or in non-welding-related engineering technology, engineering, or a physical science2 years of welding-based work experience
Engineering/technical courses applicable to a bachelor or higher degree in welding3 years of welding-based work experience
Trade/vocational courses4 years of welding-based work experience
High school diploma or approved high school equivalency diploma5 years of welding-based work experience
8th grade level of schooling9 years of welding-based work experience
Less than 8th grade12 years of welding-based work experience

Two practical points follow from the table. First, the experience must be welding-based work, and it must be documented — candidates should assemble employer and role evidence early rather than at application time, because the application is reviewed against documentation, not recollection. Second, the trade/vocational and coursework rows reward candidates who formalize training they already have; a candidate one row short of a shorter experience requirement should compare the cost of the qualifying coursework against another year of waiting, using AWS’s own published guidance.

The three parts, in full

What does Part A — Fundamentals cover?

The closed-book knowledge base of inspection: welding processes and fundamentals; metallurgy — what heat does to metal and why it governs cracking, hardness and procedure limits; destructive testing; nondestructive testing methods and their selection — which method finds which discontinuity, and what each method cannot see; fabrication math and formulas, worked without references; safety; welding symbols, read fluently in both directions; and the documents an inspector works under — welding procedure specifications (WPS) and procedure qualification records (PQR), and the relationship between them. At 150 questions it is the largest of the three parts and the broadest, and it is delivered by computer-based testing at Prometric centers. It rewards the candidate whose knowledge is organized, because there is no book to organize it for you.

How should you prepare for Part A? Survey the whole coverage early and build a map of your own gaps before drilling: its central concepts, its recurring traps, and the situations in which its rules change. Then work timed practice against that map, correcting the map whenever a question exposes a gap in it. Preparation should alternate short reading blocks with timed questions on the same material, because retrieval under time pressure is the skill the sitting itself demands. Log every miss by cause — knowledge gap, misread symbol or stem, or calculation slip — since each cause has a different repair.

Part A is a memory examination wearing a knowledge examination’s clothes: if a fact needs looking up, it is not yet learned for this part.

What separates strong candidates in Part A? Fluency in the connective tissue: symbols, documents and method selection, where items are won by recognizing what kind of question this is before solving it. The strong candidate reads a stem and already knows whether it will be answered from metallurgy, from the WPS/PQR relationship, or from an NDT capability limit. Train that recognition explicitly — classify a sample of practice items by territory before answering them, and watch the classification errors; they predict the examination errors.

What does Part B — Practical cover?

The bench examination, administered at AWS seminar and examination sites rather than at Prometric centers. Part B puts AWS-provided equipment in your hands — inspection tools, weld specimens and replicas, and documentation — and asks 46 questions about activities you perform: applying WPSs and PQRs to what is in front of you, using inspection tools and methods to measure and evaluate welds, and executing required welds. The standard applied is the examination’s own specification material provided for the sitting, not the code you chose for Part C and not your employer’s practice. The skill examined is measurement discipline end to end: set up the gauge correctly, measure honestly, compare the reading against the acceptance criteria as written, and record the accept/reject decision the criteria compel.

How should you prepare for Part B? Practise the physical motions, not just the facts about them: gauge handling, measurement of weld size, undercut, reinforcement and discontinuity dimensions, and systematic specimen evaluation against written criteria, timed and repeated until the sequence is automatic. Candidates with years of field inspection experience fail this part by inspecting the way their shop inspects instead of the way the specification reads; preparation should rehearse reading the criteria first and letting the specimen argue second. Question-based preparation cannot reproduce holding the tools, and this guide says so plainly: pair written practice with your own bench work wherever you can get it.

In Part B the specification is the senior inspector. Measure, compare, decide — in that order, every specimen, no exceptions for what you have “seen a hundred times.”

What separates strong candidates in Part B? Consistency of sequence. Under time pressure, candidates improvise — measuring before reading the criteria, or deciding before measuring — and improvisation is where points leak. The strong candidate runs the identical sequence on every specimen, including the easy ones, so that the hard specimens meet a procedure instead of a mood. Build the sequence in practice until skipping a step feels wrong; that feeling is the preparation working.

What does Part C — Code Book cover?

Navigation and application of one code, open book: 50 to 65 questions drawn from the single code book the candidate selected from AWS’s published list and brought to the examination. The published list spans the structural steel code AWS D1.1 (2020 edition) and the pipeline code API 1104 (22nd edition) — the two most common choices — alongside AWS D1.2 (structural aluminum), AWS D1.5 (bridge welding, including Clause 12), AWS D15.1 (railroad), AWS D17.1 (aerospace), the ASME options (Section IX with B31.1 and B31.3) and ISO standards. The questions do not ask what the code says in the abstract; they present a situation — a joint, a welder qualification, a repair, an inspection finding — and ask what the code requires for it. The examined skill is retrieval under time: knowing the book’s architecture well enough to go directly to the governing clause or table, reading it accurately, and applying it to facts that rarely match the clause’s own example.

How should you prepare for Part C? Choose your code deliberately — the code your work actually uses and will keep using, not the code someone else found easier — and then learn its map before its contents: clause structure, where the tables live, which figures govern which joints, what the commentary clarifies. Drill lookups timed, with the physical book you will bring, so tabs, familiarity and page sense are earned in practice rather than improvised on the day. Review every miss by failure type: wrong clause, right clause misread, or right reading applied to the wrong fact pattern. Question-based preparation trains the reasoning and the retrieval discipline; candidates should pair it with their own timed work in the actual code book.

Open book does not mean open time: every minute spent searching is a minute taken from answering, so the book’s map is worth more than any single clause in it.

What separates strong candidates in Part C? Refusal to answer from memory. The code book examination is designed so that the remembered rule is often the almost-right rule — the table footnote, the exception, the different requirement for a different loading or material changes the answer — and the strong candidate verifies in the book even when confident, because verification is fast for someone who knows the map. Speed in Part C is not reading speed; it is the absence of searching.

How are the CWI examinations scored?

Each part is scored separately against the same published line: a minimum score of 72% on each part, as AWS publishes it. All three parts must be passed to earn the credential; there is no averaging across parts, and a near-perfect Part A does not offset a Part B or Part C below the line. The 72% standard is a fixed published figure for this credential, not a scaled score: it means what it appears to mean, on each part independently. AWS reports a consolidated score report for the three parts by email approximately two weeks after completion of Parts A and C, as AWS publishes the process. A candidate who passes some parts and not others retakes the part not passed under AWS’s published re-examination rules — confirm the current rules, scheduling windows and any seminar-seat requirements in AWS’s examination information guides before planning around them, because Part B sittings are tied to scheduled examination events rather than continuous testing-center availability.

What does the certification cycle look like after you pass?

The CWI runs on a nine-year certification cycle. Renewal applications fall due at years three and six, on the basis AWS publishes — including confirmation of continuing welding-inspection practice without the breaks in practice B5.1 disallows. At year nine, recertification is required, by routes AWS publishes: the Part B Practical examination again, an approved course, or the non-examination route of 80 Professional Development Hours of continuing education accumulated in the subject areas B5.1 defines — among the other options AWS lists, including certain endorsements and the Certified Radiographic Interpreter credential. The practical lesson for new CWIs is administrative rather than technical: start the Professional Development Hour record at certification, not at year eight, and calendar the year-three renewal when the certificate arrives rather than when the reminder does.

How should you build a study plan for the three parts?

Plan three preparations, not one. Part A wants breadth built early and retrieved often: a first pass across the whole fundamentals coverage, then spaced timed retrieval, with fabrication math drilled as a separate daily habit because calculation fluency decays fastest and is needed without references. Part B wants bench repetitions distributed across the whole plan rather than a single practical weekend — measurement sequence is a motor skill and consolidates between sessions. Part C wants the code’s map learned early and its lookups drilled timed throughout, interleaved with Part A study, because the two parts reward opposite habits — answer from memory, verify in the book — and each habit must be switched on deliberately for its own sitting.

Divide the calendar by the parts’ weights in your own results, not by their question counts. A candidate whose Part A practice is strong and whose lookups are slow should invert the obvious allocation. Every part gets a first pass, a practice pass and a full-shape rehearsal at its own real format: closed-book timed sets for A, timed specimen sequences for B, timed open-book sets with the physical book for C. Reserve the final stretch for the weakest part’s rehearsal rather than the favourite part’s victory lap — the credential requires three passes, and the plan exists to protect the thinnest one.

What preparation mistakes does the CWI punish most?

The first is preparing for one examination instead of three: the fundamentals-only candidate is the credential’s most common casualty. The second is inspecting Part B from experience instead of from the specification in front of you — the examination grades the criteria as written, not your shop’s custom. The third is treating Part C as a reading test and arriving with an unfamiliar book: retrieval speed is the test, and it is built only by timed lookup practice in the actual volume. The fourth is answering Part C from memory to save time, which saves nothing when the remembered rule is the adjacent clause’s rule. The fifth is leaving eligibility documentation to application week, when employer records from years ago move slowly. The repair for all five is the same discipline — part-led, timed, criteria-first, and read by part from the first week.

How should you use this guide while the program is in development?

  1. Join the notify list today. Enrollment is not open yet, and the notify list is how you hear the moment it is. While you wait, read the AWS Certified Welding Inspector program page — it walks each part and lays out eligibility, scoring and study planning in full.
  1. Confirm your eligibility early. The education-and-experience pairing takes documentation; establishing which row of AWS’s table you occupy, and gathering the supporting records, is useful work today and removes the most common administrative surprise.
  1. When the program opens, survey every part first. Early practice should touch each of the three parts, so your first picture of yourself is honest rather than flattering.
  1. Drill the part that costs you. Let results, not preferences, set the next block of study — the credential requires three passes, not one strong average.
  1. Finish with timed practice at each part’s own shape. Closed-book, hands-on and open-book pacing are different skills; rehearse each as itself before you sit.

Frequently asked questions

What is the AWS CWI? The Certified Welding Inspector credential of the American Welding Society: a three-part certification — Fundamentals, Practical and Code Book — attesting that the holder can inspect welds and apply welding codes and specifications to the required standard.

How many questions does the CWI examination have? Part A has 150 questions, Part B has 46 questions attached to hands-on activities, and Part C has 50 to 65 questions depending on the code selected — each part taken and passed separately.

What score do I need to pass? A minimum of 72% on each part separately, as AWS publishes it. All three parts must be passed; scores do not average across parts.

Is Part C really open book? Yes — Part C is an open-book examination on one code book the candidate selects from AWS’s published list and brings. Part A, by contrast, is closed book, and Part B is a hands-on practical worked against the examination’s specification material.

Which code should I choose for Part C? The code your work actually uses — AWS D1.1 for structural steel and API 1104 for pipelines are the most common choices, and AWS’s published list also includes aluminum, bridge, railroad and aerospace codes, ASME options and ISO standards. Familiarity compounds: the code you will keep using after certification is the code whose map is worth learning deeply.

What experience do I need to qualify? A combination of education and welding-based work experience as AWS publishes it — from 1 year of experience alongside a bachelor’s degree in welding engineering or technology, to 5 years alongside a high school diploma, with longer experience required at lower education levels — plus a vision test, all documented.

What is the difference between the CWI, the CAWI and the SCWI? The CWI is the full inspector credential covered here. The CAWI (Certified Associate Welding Inspector) is the entry-level credential, and the SCWI (Senior Certified Welding Inspector) is the advanced credential for experienced CWIs. Separate credentials with separate requirements.

What happens if I pass two parts and fall short on one? You retake the part not passed, under AWS’s published re-examination rules — the passed parts are not re-examined as a set. Confirm the current re-examination rules and scheduling windows in AWS’s examination information guides.

When do I get my scores? AWS publishes that candidates receive a consolidated score report for Parts A, B and C by email approximately two weeks after completion of Parts A and C.

How long does CWI certification last? The certification cycle is nine years, with renewal applications at years three and six and recertification at year nine by the routes AWS publishes, including the Part B examination or 80 Professional Development Hours of continuing education.

Does the CWI license me to work as an inspector? The CWI is a certification, not a state license. Employers, codes and project specifications routinely require it for inspection work, which is where its force comes from.

Are these AWS’s actual examination questions? No. When this program opens, its questions will be original practice questions written by PassProfessor to AWS’s published examination structure. We never use actual examination items, recalled items, or another provider’s material.

When will enrollment open? The program is in development. Join the notify list on this page and we will email you when enrollment opens.

Disclaimer

PassProfessor is an independent exam-preparation provider; this guide is not endorsed by, affiliated with or sponsored by the American Welding Society. The credential name is used in this guide as a factual reference to the certifying body’s examination. This guide is general information about examination preparation, current as of November 2026; it confers no certification or license. The credential is awarded by AWS alone when its requirements are complete; this program confers no certification or license. The certifying body’s official publications govern if anything here differs from them.