CHST Exam Guide: The Construction Health and Safety Technician Exam, Explained

PassProfessor’s CHST program is part of the expanding PassProfessor catalog. The program is in development, built on the published outline for this examination. Join the notify list and we will email you when enrollment opens — then use this guide to plan your preparation area by area.

This program is part of the expanding PassProfessor catalog — join the notify list and we’ll email you when enrollment opens.

The CHST examination is the Board of Certified Safety Professionals’ examination for the Construction Health and Safety Technician credential: 200 multiple-choice questions in 4 hours at Pearson VUE, built on the CHST5 blueprint in effect since August 1, 2024. Four domains weight Hazard and Risk Identification and Control highest at 36.6%. Candidates need three years of construction safety, health and environmental experience, with at least 35% of job duties requiring technical SH&E skills and knowledge. BCSP publishes no fixed passing percentage; results are reported pass/fail.

The CHST is BCSP’s technician-level credential for the people who carry safety on construction sites day to day — safety technicians, coordinators and field staff whose work is hazard recognition and control on live projects. The examination matches that work: it is construction-specific throughout, weighted toward identifying hazards and controlling them, and grounded in how safety programs actually run on a site. PassProfessor’s CHST program is in development as part of the expanding PassProfessor catalog, built area by area on BCSP’s published outline. The program will be priced at $79 when enrollment opens.

Which BCSP credential is this?

This page covers the CHST — the Construction Health and Safety Technician, BCSP’s construction-technician credential. It is not the OHST, which tests general-industry hygiene and safety at the technician level, and it is not the STSC, BCSP’s supervisor-level construction credential: the CHST examines the technician who performs construction safety work, against three years of construction SH&E experience. It is also not the ASP or CSP — those are professional-level credentials with degree and experience gates the CHST does not carry. Each credential has its own blueprint and its own PassProfessor program in development.

The real exam at a glance

Fact of recordDetail
CredentialConstruction Health and Safety Technician (CHST)
Awarding bodyBCSP (Board of Certified Safety Professionals)
Questions200 multiple-choice
Time4 hours
DeliveryComputer-based at Pearson VUE testing centers; closed book
BlueprintCHST5 Examination Blueprint (effective August 1, 2024) — 4 domains
Passing standardCriterion-referenced; reported pass/fail — BCSP publishes no fixed passing percentage
Program price$79 (PassProfessor program price, when enrollment opens)

Who can take this examination?

CHST eligibility is experience-based, as BCSP publishes it. Candidates must have three years of experience in construction safety, health and environment, and at least 35% of their job duties must require technical skills and knowledge in safety, health and environment. BCSP publishes no degree, college-credit or training-hours prerequisite for the CHST. BCSP reviews applications and verifies experience; read the current CHST requirements at bcsp.org before you apply, and note that eligibility runs for one year from approval.

The outline, area by area

Content areaPublished weight
Hazard and Risk Identification and Control36.6%
Safety Program Development, Implementation, and Sustainment22.5%
Leadership, Communication, and Training21%
Emergency Preparedness, Incident Investigation, and Response19.9%

What does Hazard and Risk Identification and Control cover? (36.6%)

The largest domain by a wide margin: recognizing construction hazards and controlling them — hot work, electrical hazards, excavations, work at heights and fall protection, confined spaces, struck-by hazards, cranes and rigging, material handling, housekeeping, tools and equipment, and the health hazards of construction work including asbestos, lead, silica, chemicals, noise and heat, together with job hazard analysis and the hierarchy of controls.

How should you prepare for Hazard and Risk Identification and Control? Allocate study time in proportion to its published weight — 36.6% — and then adjust by evidence: survey the area early, note where your reasoning breaks down, and return with focused practice rather than rereading. The questions in this area reward applied judgment in realistic situations, so preparation should pair every block of reading with questions answered under time, followed by a careful review of why each wrong option was wrong. Keep a running list of the distinctions this area tests most finely; on this outline, small distinctions inside a heavily weighted area are worth more than broad familiarity everywhere.

What separates strong candidates in Hazard and Risk Identification and Control? Usually not more facts, but cleaner sequencing: recognizing the decisive feature of a situation first, discarding options that are true but not responsive, and choosing the action the situation calls for now rather than eventually. When you review practice in this area, classify every miss before you move on — knowledge gap, misread situation, or wrong priority — because each class has a different repair, and lumping them together hides the pattern your next study block should attack. Revisit the area in mixed practice before you test; competence that only appears when you know the topic in advance is not yet examination competence.

How does Hazard and Risk Identification and Control behave on the day? Under examination conditions this area rewards the candidate who reads for the situation before reaching for a rule: who is exposed, what is the hazard’s pathway, and which control or program step answers it first. Worked examples in your reading should be re-solved as decisions — cover the outcome, commit to the action you would take, and then compare. Where the domain carries calculations, do them by hand at the testing center’s pace until the setup is automatic; where it carries program content, rehearse the sequence of steps in order, because examination questions in this area often turn on what happens next rather than on what a term means.

What does Safety Program Development, Implementation, and Sustainment cover? (22.5%)

How a site safety program is built and kept working: applicable standards and site-specific safety plans, inspections and audits, regulatory authority, documentation and recordkeeping, incident causation and post-incident reporting, trend analysis, and evaluating construction means and methods for safety.

How should you prepare for Safety Program Development, Implementation, and Sustainment? Allocate study time in proportion to its published weight — 22.5% — and then adjust by evidence: survey the area early, note where your reasoning breaks down, and return with focused practice rather than rereading. The questions in this area reward applied judgment in realistic situations, so preparation should pair every block of reading with questions answered under time, followed by a careful review of why each wrong option was wrong. Keep a running list of the distinctions this area tests most finely; on this outline, small distinctions inside a heavily weighted area are worth more than broad familiarity everywhere.

What separates strong candidates in Safety Program Development, Implementation, and Sustainment? Usually not more facts, but cleaner sequencing: recognizing the decisive feature of a situation first, discarding options that are true but not responsive, and choosing the action the situation calls for now rather than eventually. When you review practice in this area, classify every miss before you move on — knowledge gap, misread situation, or wrong priority — because each class has a different repair, and lumping them together hides the pattern your next study block should attack. Revisit the area in mixed practice before you test; competence that only appears when you know the topic in advance is not yet examination competence.

How does Safety Program Development, Implementation, and Sustainment behave on the day? Under examination conditions this area rewards the candidate who reads for the situation before reaching for a rule: who is exposed, what is the hazard’s pathway, and which control or program step answers it first. Worked examples in your reading should be re-solved as decisions — cover the outcome, commit to the action you would take, and then compare. Where the domain carries calculations, do them by hand at the testing center’s pace until the setup is automatic; where it carries program content, rehearse the sequence of steps in order, because examination questions in this area often turn on what happens next rather than on what a term means.

What does Leadership, Communication, and Training cover? (21%)

The technician as communicator: training methods and instructional materials, worker motivation, communication strategies on multi-employer sites, consulting with manufacturers and subject-matter experts, confidentiality, and task-based training that changes behavior on the crew.

How should you prepare for Leadership, Communication, and Training? Allocate study time in proportion to its published weight — 21% — and then adjust by evidence: survey the area early, note where your reasoning breaks down, and return with focused practice rather than rereading. The questions in this area reward applied judgment in realistic situations, so preparation should pair every block of reading with questions answered under time, followed by a careful review of why each wrong option was wrong. Keep a running list of the distinctions this area tests most finely; on this outline, small distinctions inside a heavily weighted area are worth more than broad familiarity everywhere.

What separates strong candidates in Leadership, Communication, and Training? Usually not more facts, but cleaner sequencing: recognizing the decisive feature of a situation first, discarding options that are true but not responsive, and choosing the action the situation calls for now rather than eventually. When you review practice in this area, classify every miss before you move on — knowledge gap, misread situation, or wrong priority — because each class has a different repair, and lumping them together hides the pattern your next study block should attack. Revisit the area in mixed practice before you test; competence that only appears when you know the topic in advance is not yet examination competence.

How does Leadership, Communication, and Training behave on the day? Under examination conditions this area rewards the candidate who reads for the situation before reaching for a rule: who is exposed, what is the hazard’s pathway, and which control or program step answers it first. Worked examples in your reading should be re-solved as decisions — cover the outcome, commit to the action you would take, and then compare. Where the domain carries calculations, do them by hand at the testing center’s pace until the setup is automatic; where it carries program content, rehearse the sequence of steps in order, because examination questions in this area often turn on what happens next rather than on what a term means.

What does Emergency Preparedness, Incident Investigation, and Response cover? (19.9%)

Fire protection, emergency action plans, environmental contamination response, incident command, crisis management, emergency response equipment, first aid needs, notifications, response exercises, and the disciplined investigation that follows an incident.

How should you prepare for Emergency Preparedness, Incident Investigation, and Response? Allocate study time in proportion to its published weight — 19.9% — and then adjust by evidence: survey the area early, note where your reasoning breaks down, and return with focused practice rather than rereading. The questions in this area reward applied judgment in realistic situations, so preparation should pair every block of reading with questions answered under time, followed by a careful review of why each wrong option was wrong. Keep a running list of the distinctions this area tests most finely; on this outline, small distinctions inside a heavily weighted area are worth more than broad familiarity everywhere.

What separates strong candidates in Emergency Preparedness, Incident Investigation, and Response? Usually not more facts, but cleaner sequencing: recognizing the decisive feature of a situation first, discarding options that are true but not responsive, and choosing the action the situation calls for now rather than eventually. When you review practice in this area, classify every miss before you move on — knowledge gap, misread situation, or wrong priority — because each class has a different repair, and lumping them together hides the pattern your next study block should attack. Revisit the area in mixed practice before you test; competence that only appears when you know the topic in advance is not yet examination competence.

How does Emergency Preparedness, Incident Investigation, and Response behave on the day? Under examination conditions this area rewards the candidate who reads for the situation before reaching for a rule: who is exposed, what is the hazard’s pathway, and which control or program step answers it first. Worked examples in your reading should be re-solved as decisions — cover the outcome, commit to the action you would take, and then compare. Where the domain carries calculations, do them by hand at the testing center’s pace until the setup is automatic; where it carries program content, rehearse the sequence of steps in order, because examination questions in this area often turn on what happens next rather than on what a term means.

How does the examination sitting work?

The sitting runs exactly as the fact table records: a computer-based, closed-book examination at a Pearson VUE testing center, taken inside the one-year eligibility window that follows BCSP’s approval of your application. The testing center provides materials for working out calculations by hand; outside reference materials are not permitted. There are no scheduled study breaks built into your preparation problem — pacing is: divide the sitting by the question count early in your practice, learn your personal minutes-per-question rhythm on full timed sets, and practice recovering from a hard question by marking it, moving on, and returning with fresh eyes rather than spending the time your remaining questions need. Treat every question as answerable: BCSP examinations include questions being piloted for future use mixed among the scored ones and not identified as such, so the correct strategy is to answer everything in front of you with the same care.

How should you read the published weights?

A blueprint weight is the certifying body’s own statement of emphasis — the closest thing to an official study allocation that exists. Read the weights three ways. First, as a budget: across a fixed preparation period, the heaviest domain should receive roughly its weight’s share of your hours, and no domain should receive none. Second, as a risk statement: a candidate can survive a weak small domain and still be undone by it if the weakness is total, because examinations sample broadly; the floor for every domain is working competence, and the weights decide where depth is added on top of that floor. Third, as a diagnostic: when your practice results come back by domain, compare them against the weights — a weakness in a heavy domain costs several times what the same weakness costs in a light one, and repair order should follow that arithmetic, not the order in which you enjoy studying.

What score passes?

BCSP does not publish a fixed percentage or raw number of correct answers as the passing standard for its examinations. Its examinations are criterion-referenced: the passing standard is set through BCSP’s standard-setting process so that it reflects the competence the credential attests, and results are reported as pass/fail against that standard. This page therefore states no passing percentage — any source quoting one for the CHST is quoting something BCSP has not published. A practice percentage, in any provider’s material including ours, is a study instrument only.

How should you plan your preparation?

Work in three passes. First pass — learn the outline in weight order. Take the domains from heaviest to lightest, learning each domain’s core duties and decision patterns before moving on; keep the published weights in view, because they are the examination’s own statement of where the questions will come from. Second pass — scenario practice under time. Shift to questions that put you inside a worksite, program or classroom situation and ask for the best action, and run an error log that classifies every miss as a knowledge gap, a misread situation or a wrong priority; repair the class, not just the question. Third pass — full sittings. In the final stretch, sit complete timed practice at the real sitting’s length and pace, mixed across domains exactly as the real examination mixes them, and schedule the real examination when your timed work is consistently strong across every domain — not only the heavy ones.

What should you confirm before you sit?

Confirm your eligibility against the current requirements at bcsp.org before you apply — BCSP reviews applications and verifies what you submit, and eligibility runs for one year from approval. After approval, schedule at Pearson VUE inside that window, and read the examination rules — closed book, testing-center materials for hand calculations — before the day, so nothing about the sitting itself is a surprise.

How do candidates misjudge this examination?

The recurring misjudgment is studying construction safety as a list of rules. The CHST5 blueprint is written in skills and knowledge, and its heaviest domain asks the candidate to identify hazards in described work and select controls — judgment exercised on a situation, not recall of a standard’s text. Candidates who prepare by memorizing requirements often know the material and still miss the question, because the question asks what the technician does about the situation in front of them. Prepare accordingly: for every topic in your reading, construct the site situation it governs, decide the action, and only then check yourself against the source. A second misjudgment runs the other way: experienced field staff sometimes trust their site habits over the blueprint’s framing, and answer as their own project does things rather than as the credential defines competent practice. The examination tests the profession’s standard, not one employer’s custom — when your habit and the published practice differ, the examination is asking about the published practice.

Frequently asked questions

What is the CHST examination? BCSP’s examination for the Construction Health and Safety Technician credential: 200 multiple-choice questions in 4 hours at Pearson VUE, built on the CHST5 blueprint.

What score do I need to pass? BCSP sets the standard by a criterion-referenced process and reports results as pass/fail. It publishes no fixed passing percentage, and this page states none.

Am I eligible for the CHST? You need three years of construction safety, health and environmental experience, with at least 35% of your duties requiring technical SH&E skills and knowledge. BCSP publishes no degree requirement for this credential.

Which domain is largest? Hazard and Risk Identification and Control, at 36.6% — more than a third of the examination.

How is the CHST different from the STSC? The CHST certifies technicians who perform construction safety work; the STSC certifies supervisors whose primary job is leading crews. Different experience gates, different blueprints, different examinations.

How is the CHST different from the OHST? The CHST is construction-specific. The OHST covers occupational hygiene and safety across general industry. The blueprints and eligibility experience differ.

Where do I take the examination? At Pearson VUE testing centers, after BCSP approves your application. The examination is closed book.

What does the PassProfessor program cost? $79, when enrollment opens. The program is in development as part of the expanding PassProfessor catalog; join the notify list and the launch email will carry the enrollment link.

Are these BCSP’s actual examination questions? No. When this program opens, its questions will be original practice questions written by PassProfessor to BCSP’s published CHST5 blueprint. We never use actual examination items, recalled items, or another provider’s material.

When will enrollment open? The program is in development. Join the notify list on this page and we will email you when enrollment opens at the $79 program price.

How long should I prepare? BCSP publishes no recommended study time. A practical approach is to work domain by domain in blueprint order, giving Hazard and Risk Identification and Control the largest share, and to finish with full timed sittings at the real examination’s 4-hour pace before you schedule.

Does the CHST require OSHA training cards? BCSP publishes no training-hours prerequisite for the CHST — eligibility rests on the three years of construction SH&E experience and the 35% duties rule. Training you already hold may still help you prepare, but it is not the eligibility gate.

What happens after I pass? BCSP awards the credential once all requirements are met. Holders maintain it through BCSP’s recertification program — confirm the current points and cycle requirements in BCSP’s Recertification Guide at bcsp.org.

Disclaimer

PassProfessor is an independent exam-preparation provider; this program is not endorsed by, affiliated with or sponsored by the BCSP (Board of Certified Safety Professionals). The credential name is used on this page as a factual reference to the certifying body’s examination. This program is examination preparation only: it provides no certification or license, which the certifying body or licensing authority alone awards to candidates who meet its requirements. Examination details on this page are drawn from the official sources recorded in the companion guide and are current as of November 2026; the certifying body’s official publications govern if anything here differs from them.