CCO Dedicated Pile Driver Operator (DPD) – Practice Exams
About This Program
This program prepares candidates for the CCO Dedicated Pile Driver Operator (DPD) written examination, administered by CCO (the National Commission for the Certification of Crane Operators, NCCCO). The Dedicated Pile Driver Operator certification covers operators of dedicated pile-driving equipment – a carrier or rig fitted with leads and a pile hammer, driving bearing and sheet piles for foundations, piers, bulkheads and retaining work. The program was developed by NCCCO jointly with the Pile Driving Contractors Association (PDCA). Certification requires both a written examination and a practical examination; this program prepares for the written examination only and does not cover the practical examination. The written examination has 70 multiple-choice questions in 90 minutes. CCO publishes no percentage domain weights for this examination, so the practice areas below are blueprint allocations over the program’s published knowledge areas – site and setup, inspection, operation, maintenance and technical knowledge of hammers, leads and piles, and load charts – not CCO weights. CCO publishes no percentage passing standard for this written examination in the pinned sources, so the practice benchmark in this program is a study target only. PassProfessor is independent and not affiliated with CCO (NCCCO) or PDCA, and this product is examination preparation only.
What Is Covered
- A. Site & Setup (300 questions): ground conditions, bearing and rig support; site review, pile layout and work plan; underground and overhead utilities and power lines; rig assembly, leads setup and alignment; exclusion zones and crew protection; weather, water and marine setup; access, travel and positioning the rig.
- B. Operations (600 questions): pre-operational and shift inspection; starting, warm-up and function checks; hoisting and handling piles to the leads; positioning, plumbing and seating the pile; driving operations, hammer control and blow monitoring; driving to depth, refusal and acceptance awareness; extracting and handling driven piles; hand signals and crew coordination; power lines, weather and environment; traveling the rig; shutdown and securing.
- C. Technical Knowledge (420 questions): pile types and pile behavior; hammers – diesel, hydraulic, air, vibratory and drop; leads, templates, gates and pile cushions; rig components, wire rope and hoist systems; hydraulics, power and controls; operator aids, limiting devices and safety systems; maintenance knowledge and defect reporting.
- D. Load Charts & Capacity (180 questions): pile driver load chart terminology and chart selection; rated capacity by radius, leader angle and configuration; deductions, net capacity and gross load including hammer, leads and attachments; chart limits, notes and prohibited configurations.
How It Works
The bank contains 1,500 original practice questions written to the published knowledge areas, each with a full explanation. Practice questions are original items; they are not CCO exam questions. A full practice exam mirrors the real written examination at 70 questions in 90 minutes, drawn across the four areas in proportion to the bank. Practice exams are scored against a 70% PassProfessor practice benchmark – a practice benchmark only, not a CCO passing standard. Eligibility note: CCO requires candidates to be at least 18, comply with the CCO Substance Abuse Policy, and agree to the CCO Code of Ethics; the written and practical elements must be passed within 12 months of each other, and certification runs five years and covers dedicated pile drivers only.
Full access: $49 for 6 months. Start with the free 20-question sample.
